Integrated ambient ozone evaluation by passive samplers and clover biomonitoring mini-stations

An ozone monitoring network was set up using passive samplers and biological mini-stations of two clones of white clover (Trifolium repens L. cv. Regal), NC-R (O(3)-resistant) and NC-S (O(3)-sensitive). This paper reports on a pilot study performed in the period June-October 1999 in the Rome municipal area by using five biomonitoring mini-stations and ozone passive samplers with a new nitrite based design. This combined methodology can be used to obtain information on the biological implications of the injury due to tropospheric ozone. The two techniques can integrate data for the short-medium period and can be placed in different urban and rural sites, proving to be a very useful tool for ozone concentration mapping.     

Development of spoilage microbiota in beef stored in nisin activated packaging

The aim of this study was to assess the microbial populations causing the spoilage of chilled beef during storage and to evaluate the effect of the use of an antimicrobial packaging for the meat storage. A nisin activated antimicrobial packaging was developed by using a nisin, HCL and EDTA solution and used for the storage of beef cuts at 1 °C. The common spoilage related microbial groups were monitored during the storage of beef in activated and non activated plastic bags by using selective media. The use of the antimicrobial packaging caused an overall significant reduction of viable counts of Gram positive bacteria such as carnobacteria, lactic acid bacteria and Brochotrix thermosphacta whose development was inhibited for at least 11 days of storage compared to the control. Moreover, a 1–3 log cycles reduction of enterobacteria was also registered between 22 and 32 days of storage. The microbiota was assessed at species level by using Polymerase chain reaction-denaturing gradient gel electrophoresis (PCR-DGGE) analysis of 16S rRNA gene of DNA extracted directly from meat and from bulk cells from selective media plates and showed that the species occurring within the targeted microbial groups did not change according to storage conditions. In conclusion, the use of the nisin activated packaging reduced the number of spoilage populations but did not affect the species diversity. Improved antimicrobial packaging is needed, possibly coupled with vacuum storage, to possibly achieve a simultaneous inhibition of more spoilage microbial groups and to preserve the microbiological quality of beef during chilled storage.     

Effect of laser microcutting on thermo-mechanical properties of NiTiCu shape memory alloy

The machining of shape memory alloys (SMAs), such as NiTi based alloys, is a very interesting and relevant topic for several industrial applications in the biomedical, sensor and actuator fields. Laser technology is one of the most suitable methods for the manufacturing of products in the aforementioned fields, mainly when small and precise features have to be included. Due to the thermal nature of this process, study of its effect on the functional properties of these materials is needed. Except for binary NiTi, few results on the laser machining of NiTi based alloys are available in the literature. In this work, thin sheets of Ni40Ti50Cu10 (at.%) were processed by a fibre laser and the effect of process speed on the material properties was analysed. Scanning electronic microscopy was adopted for observation of the laser cut edges’ morphology. Chemical composition of the processed material was evaluated by energy dispersion spectroscopy and nanohardness measurements were used to estimate the heat affected zone. SMA functional properties were studied on both base and laser machined material. These characteristics are affected by laser machining for the presence of melted material; this effect can be minimised by increasing the laser process speed.     

Distributed Coordination and Workflow on the World Wide Web

This paper describes WebFlow, an environment thatsupports distributed coordination services on theWorld Wide Web. WebFlow leverages the HTTP Webtransport protocol and consists of a number of toolsfor the development of applications that require thecoordination of multiple, distributed servers.Typical applications of WebFlow include distributeddocument workspaces, inter/intra-enterprise workflow,and electronic commerce. In this paper we describe thegeneral WebFlow architecture for distributedcoordination, and then focus on the environment fordistributed workflow.     

Recommendation of RILEM Technical Committee 250-CSM: Test method for Textile Reinforced Mortar to substrate bond characterization

Textile Reinforced Mortar (TRM), also known as Fabric Reinforced Mortar or Fabric Reinforced Cementitious Matrix, composites are an emerging technology for the external repair and strengthening of existing structures. For most applications, the effectiveness of the TRM reinforcement relies on its bond performance. This recommendation identifies the best practice to characterize the bond behaviour of TRM. A shear bond test method is proposed to determine the peak axial stress (associated with the maximum load that can be transferred from the structural member to the externally bonded TRM reinforcement), the stress–slip relationship and the failure mode that controls the TRM-to-substrate load transfer capacity. Guidelines on specimen manufacturing, experimental setup, test execution, and determination of test results are provided.     

Use of a toasted durum whole meal in the production of a traditional Italian pasta: chemical, mechanical, sensory and image analyses

The characterisation of traditional Italian pasta obtained by mixing amounts of toasted whole meal with re-milled semolina and other ingredients was obtained by means of physico-chemical, rheological, mechanical, sensory and image analyses. The toasted meal showed higher ash, fibre and protein contents than re-milled semolina. The replacement of percentages of re-milled semolina with the toasted meal and soft flour increased tenacity and decreased extensibility and strength, making the dough less suitable for pasta-making. The P / L values were indices of high starch damage. The replacement of part of re-milled semolina and water with toasted whole wheat meal, soft flour and eggs increased the optimal cooking time and the amount of water absorbed during cooking but made the other cooking parameters worse. The image analysis provided evidence of the changes induced by the use of toasted wholemeal, soft flour and eggs in the microscopic structure of pasta protein and starch.     

Polyazines and Polyazomethines with Didodecylthiophene Units for Selective Dispersion of Semiconducting Single‐Walled Carbon Nanotubes

Polymer wrapped single‐walled carbon nanotubes (SWNTs) have been demonstrated to be a very efficient technique to obtain high purity semiconducting SWNT solutions. However, the extraction yield of this technique is low compared to other techniques. Poly‐alkyl‐thiophenes have been reported to show higher extraction yield compare to polyfluorene derivatives. Here, the affinity for semiconducting SWNTs of two polymers with a backbone containing didodecylthiophene units interspersed with N atoms is reported. It is demonstrated that one of the polymers, namely, poly(2,5‐dimethylidynenitrilo‐3,4‐didodecylthienylene) (PAMDD), has very high semiconducting SWNT extraction yield compared to the poly(3,4‐didodecylthienylene)azine (PAZDD). The dissimilar wrapping efficiency of these two polymers for semiconducting SWNTs is attributed to the interplay between the affinity for the nitrogen atoms of the highly polarizable walls of SWNTs and the mechanical flexibility of the polymer backbones. Photoluminescence (PL) measurements demonstrate the presence of metallic tubes and SWNT bundles in the sample selected with PAZDD and higher purity of SWNT‐PAMDD samples. The high purity of the semiconducting SWNTs selected by PAMDD is further demonstrated by the high performance of the solution‐processed field‐effect transistors (FETs) fabricated using a blade coating technique, which exhibit hole mobilities up to 33.3 cm² V^?1 s^?1 with on/off ratios of 10⁶.     

Supramolecular Order of Solution‐Processed Perylenediimide Thin Films: High‐Performance Small‐Channel n‐Type Organic Transistors

N,N′‐1H,1H‐perfluorobutyl dicyanoperylenecarboxydiimide (PDIF‐CN₂), a soluble and air stable n‐type molecule, undergoes significant reorganization upon thermal annealing after solution deposition on several substrates with different surface energies. Interestingly, this system exhibits an exceptional edge‐on orientation regardless of the substrate chemistry. This preferential orientation is rationalized in terms of strong intermolecular interactions between the PDIF‐CN₂ molecules. The presence of a pronounced π–π stacking is confirmed by combining near‐edge X‐ray absorption fine structure spectroscopy (NEXAFS), dynamic scanning force microscopy (SFM) and surface energy measurements. The remarkable charge carrier mobility measured in field‐effect transistors, using both bottom‐ and top‐contact (bottom‐gate) configurations, underlines the importance of strong intermolecular interactions for the realization of high performing devices.     

Crystal Size,Morphology, and Growth Mechanism in Bio‐Inspired Apatite Nanocrystals

Bio‐inspired apatite nanoparticles precipitated in the presence of citrate ions at increasing maturation times are characterized in terms of structure, size, morphology, and composition through advanced X‐ray total scattering techniques. The origin of the platy crystal morphology, breaking the hexagonal symmetry, and the role of citrate ions is explored. By cross‐coupling the size and shape information of crystal domains with those obtained by atomic force microscopy on multidomain nanoparticles, a plausible mechanism underlying the amorphous‐to‐crystal transformation is reconstructed. In the present study, citrate plays the distinct roles of inducing the platy morphology of the amorphous precursor and controlling the thickness of the Ca‐deficient apatite nanocrystals. These findings can open new scenarios also in bone mineralization, where citrate might have a broader role to play than has been thought to date.