Climate dependence of energy saving strategies in public buildings characterized by change of use: an original case study

In the perspective of reducing land occupation of built environments, the most efficient strategy is to increase the reuse of obsolete or abandoned constructions instead of designing new buildings. This is particularly true regarding public buildings, usually characterized by considerable dimensions. The paper is focused on this issue, particularly on its energy implications. It analyzes the headquarters of the “G. D’Annunzio” University in Pescara, Italy, initially designed for commercial use and later converted to a university building during its construction. The authors first carried out a numerical analysis of the building energy performance in its current state and then they proposed some improvement interventions evaluating their incidence on the annual energy balance of the building, showing how the most commonly used energy saving strategies do not give the best results in any case, being greatly influenced by the climatic zone in which the building is located. Starting from these considerations, the authors carried out the analysis by considering three different Italian climatic conditions so as to determine their influence on the building energy performance and to define the best strategy for energy requalification in each climatic zone.     

Honeymoon fast-set adhesives for glulam and fingerjoints of higher natural materials content

Addition of flavonoid tannin extract to the PRF component A of a PRF/Tannin honeymoon fast set adhesive system for glulam and fingerjointing yields (PRF?+?Tannin)/Tannin adhesive systems where the total percentage of natural material can be as high as 65% (2/3) of total adhesive resin solids without any loss of either long term performance or fast curing rate.     

Particleboards production from date palm biomass

Date palm biomass is a renewable natural resource that has not widely been utilized in industry. The objective of this study was to examine some chemical properties of date palm trunk and rachis (holocellulose, cellulose, lignin and extractives) and to evaluate their suitability to produce composite panels. Particleboards were produced using trunk and rachis as an alternative raw material for forest products industry in the presence of two types of polycondensation resins (phenol–formaldehyde and melamine urea–formaldehyde) which were selected as binding agents. The panels were tested for their physical (water absorption and thickness swelling) and mechanical (modulus of rupture, modulus of elasticity and internal bond strength) properties. The internal bond strength of date palm trunk and date palm rachis based boards met the requirements of the general purpose product standards (EN 312) at 0.70 g/cm³ density. The panels made with phenol–formaldehyde resin showed better performance with respect to the panels made with melamine urea–formaldehyde. In addition, the particleboard made with date palm trunk particles had better quality compared to the particleboard made from date palm rachis particles. Based on preliminary results of this work, raw materials from date palm trunks and rachis can have a promising potential in the manufacture of particleboards and as a substitute for wood in board production.     

Remodeling of a commercial plug-in battery electric vehicle to a hybrid configuration with a PEM fuel cell

In the present research, a commercial battery-powered pure electric vehicle was suitably modified to convert it into a hybrid one integrating a PEMFC stack. The hydrogen supply system to the stack included a passive recirculation system based on a Ventury-type ejector. Besides, in order to achieve an optimum operation of the PEMFC stack, a discrete state machine model was considered in its control system. The inclusion of a rehabilitation operating mode prevented the stack from possible failures, increasing its lifetime. It was verified that for the rated operating point when supplying power to the vehicle (2.5 kW) the hydrogen consumption decreased, and the actual efficiency (47.9%) PEMFC was increased close to 1%. Field tests performed demonstrate that the range of the hybrid electric vehicle was increased by 78% when compared to the one of the original battery electric car. Also, under the tested experimental conditions in hybrid mode, 34% of the total energy demanded by the electric machine of the vehicle was supplied by the PEMFC stack.     

Development and characterisation of electrochromic devices on polymeric substrates

The development of full solid-state electrochromic (EC) devices on polymeric substrate is underway within a CEC BRITE-EURAM project (Project “FREDOPS”, BE-4137) carried out by four industries, two universities and two research centers from Belgium, Denmark, France, and Italy. The specific goal of this project is to develop a Fast Response Electrochromic Device On Polymeric Substrate (FREDOPS); in order to satisfy the required range of specifications in terms of fast response, long term performance and high contrast ratio, several systems based on different materials have been tested. The full cells consist of an electrochromic material layer and a counter electrode, inserted between two PET/ITO layers and separated by a polymeric electrolyte. Different types of polymeric electrolytes, counter electrodes and electrochromic layers have been developed, studied and checked. Full devices have been assembled using different combinations. Voltammetric and spectrophotometric measurements have been executed to check the electrochromic behaviour of the developed layers in half and full cells. Comparison of the electrochromic performances of different materials based cells has led to the rejection of several solutions due to poor performance and incompatibilities between layers. Considering that the electrochromic devices are finalised for different uses (window, sunroof,…), some performance specifications for each application are defined. A testing bench for cycling and ageing was developed. The present paper discusses these results in order to indicate the best performance.     

Syngas production by steam and oxy-steam reforming of biogas on monolith-supported CeO2-based catalysts

In this study, the syngas production by steam reforming (SR) and oxy-steam reforming (OSR) of clean biogas over cordierite monoliths (400 cpsi) lined with Ni, Rh, or Pt on CeO₂ catalyst was deeply investigated. Structured catalysts were prepared by using an alternative method to traditional washcoating based on the combination of the solution combustion synthesis (SCS) with the wetness impregnation (WI) technique. TEM and SEM analysis were used to study the morphology of the catalytic layer and to determine its thickness, while the quality of the coating in terms of adhesion on the monolith was evaluated by ultrasonic treatment in isopropyl alcohol solution. The performance and the stability of the structured catalysts were investigated at different process parameters, namely temperature (700–900 °C), steam-to-carbon (S/C = 1–5) and oxygen-to-carbon (O/C = 0.1–0.2) molar ratios, and weight space velocity (WSV = 30,000–250,000 NmL g_cat^?1 h^?1). The SCS + WI deposition method allowed obtaining a uniform and thin coated layer with high mechanical strength. The following order of activity was exploited: Rh > Pt > Ni for biogas SR and Rh > Pt ≈ Ni for biogas OSR. The Rh-based catalyst exhibited higher activity and long-lasting stability towards biogas SR and OSR reactions for syngas production.     

Life cycle assessment of alternatives for hydrogen production from renewable and fossil sources

New processes under development for producing hydrogen have been assessed using a life cycle methodology and compared to conventional ones. The aim of this paper is to determine the main obstacles to be beaten or the critical aspects to be addressed to ensure the feasibility of these processes. Water photosplitting, solar two-step thermochemical cycles and automaintained methane decomposition with different lay-outs were studied. They have been compared to methane steam reforming with CCS and electrolysis with different electricity sources.     

Occurrence and behaviour of linear alkylbenzenesulphonates, nonylphenol, nonylphenol mono- and nonylphenol diethoxylates in sewage and sewage sludge treatment

The fluxes of linear alkylbenzenesulphonates (LAS), nonylphenol (NP), nonylphenol monoethoxylate (NP1EO) and nonylphenol diethoxylate (NP2EO) through sewage and sludge treatment of 29 Swiss sewage treatment plants were investigated. Reversed-phase high-performance liquid chromatography (HPLC) was used to determine LAS. Normal-phase HPLC was employed to measure NP, NP1EO and NP2EO which are metabolites of the nonionic surfactants of the nonylphenol polyethoxylate type (NPnEO). Quantitative determinations were performed of raw sewage, primary and secondary effluents and of sewage sludge. Under normal conditions of sewage and sludge treatment, LAS were efficiently removed from the raw wastewater (> 99% w/w) and were partly transferred to the sewage sludge (15–20% w/w). About 50% (molar base) of NPnEO in the sewage were transformed to NP and accumulated in the digested sludge. Large variations existed among different sewage treatment plants. It was estimated that 1.0 g m⁻² y⁻¹ of LAS and 0.3 g m⁻² y⁻¹ of NP are applied with sewage sludge to Swiss soils.     

Fumonisin-producing strains of Fusarium: a review of their ecophysiology

This review focuses on the fumonisin-producing Fusarium species and the ecophysiology of these species. The effects of environmental biotic and abiotic factors on germination, growth, and fumonisin B1 production by Fusarium verticillioides and Fusarium proliferatum have been investigated under laboratory, field, and storage conditions. An understanding of the factors involved in production of fumonisins is the first step in preventing accumulation of these toxins.