Vacuum-based preservation of surgical specimens: An environmentally-safe step towards a formalin-free hospital

Formalin as a fixative has no practical substitutes, but is toxic and potentially carcinogenic, so caution of its use in hospitals and elsewhere is mandatory. In our hospital, preservation of surgical specimens into formalin to be transferred to pathology labs was replaced by under-vacuum sealing (UVS) tissues into plastic bags and preservation at 4 °C until transfer. Data analysis showed UVS processing to be superior in terms of staff satisfaction and of gross anatomic preservation; no problems in terms of technical feasibility or histopathologic preservation were encountered. Formalin was confined to pathology labs while its use on hospital premises was vastly reduced.     

Variable-gain up-converter with current reuse for 5-GHz WLAN applications

A variable-gain up-conversion mixer for 5-GHz WLAN applications is presented, whose input stage is based on a novel variable gain transconductor. The proposed topology features reduced power consumption by exploiting dc current reuse for mixer biasing. Moreover, a new low-consumption control circuit is introduced, which achieves a temperature-stable and linear-in-dB characteristic, providing a 40-dB dynamic range within ±1 dB gain error.     

Evidence for the Band‐Edge Exciton of CuInS2 Nanocrystals Enables Record Efficient Large‐Area Luminescent Solar Concentrators

Ternary I‐III‐VI₂ nanocrystals (NCs), such as CuInS₂, are receiving attention as heavy‐metals‐free materials for solar cells, luminescent solar concentrators (LSCs), LEDs, and bio‐imaging. The origin of the optical properties of CuInS₂ NCs are however not fully understood. A recent theoretical model suggests that their characteristic Stokes‐shifted and long‐lived luminescence arises from the structure of the valence band (VB) and predicts distinctive optical behaviours in defect‐free NCs: the quadratic dependence of the radiative decay rate and the Stokes shift on the NC radius. If confirmed, this would have crucial implications for LSCs as the solar spectral coverage ensured by low‐bandgap NCs would be accompanied by increased re‐absorption losses. Here, by studying stoichiometric CuInS₂ NCs, it is revealed for the first time the spectroscopic signatures predicted for the free band‐edge exciton, thus supporting the VB‐structure model. At very low temperatures, the NCs also show dark‐state emission likely originating from enhanced electron‐hole spin interaction. The impact of the observed optical behaviours on LSCs is evaluated by Monte Carlo ray‐tracing simulations. Based on the emerging device design guidelines, optical‐grade large‐area (30×30 cm²) LSCs with optical power efficiency (OPE) as high as 6.8% are fabricated, corresponding to the highest value reported to date for large‐area devices.     

Solution‐Processed GaSe Nanoflake‐Based Films for Photoelectrochemical Water Splitting and Photoelectrochemical‐Type Photodetectors

Gallium selenide (GaSe) is a layered compound, which has been exploited in nonlinear optical applications and photodetectors due to its anisotropic structure and pseudodirect optical gap. Theoretical studies predict that its 2D form is a potential photocatalyst for water splitting reactions. Herein, the photoelectrochemical (PEC) characterization of GaSe nanoflakes (single‐/few‐layer flakes), produced via liquid phase exfoliation, for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in both acidic and alkaline media is reported. In 0.5 m H₂SO₄, the GaSe photoelectrodes display the best PEC performance, corresponding to a ratiometric power‐saved metric for HER (Φ_saved,HER) of 0.09% and a ratiometric power‐saved metric for OER (Φ_saved,OER) of 0.25%. When used as PEC‐type photodetectors, GaSe photoelectrodes show a responsivity of ≈0.16 A W^?1 upon 455 nm illumination at a light intensity of 63.5 µW cm^?2 and applied potential of ?0.3 V versus reversible hydrogen electrode (RHE). Stability tests of GaSe photodetectors demonstrated a durable operation over tens of cathodic linear sweep voltammetry scans in 0.5 m H₂SO₄ for HER. In contrast, degradation of photoelectrodes occurred in both alkaline and anodic operation due to the highly oxidizing environment and O₂‐induced (photo)oxidation effects. The results provide new insight into the PEC properties of GaSe nanoflakes for their exploitation in photoelectrocatalysis, PEC‐type photodetectors, and (bio)sensors.     

Transition‐Metal Dichalcogenide NiTe2: An Ambient‐Stable Material for Catalysis and Nanoelectronics

By means of theory and experiments, the application capability of nickel ditelluride (NiTe₂) transition‐metal dichalcogenide in catalysis and nanoelectronics is assessed. The Te surface termination forms a TeO₂ skin in an oxygen environment. In ambient atmosphere, passivation is achieved in less than 30 min with the TeO₂ skin having a thickness of about 7 Å. NiTe₂ shows outstanding tolerance to CO exposure and stability in water environment, with subsequent good performance in both hydrogen and oxygen evolution reactions. NiTe₂‐based devices consistently demonstrate superb ambient stability over a timescale as long as one month. Specifically, NiTe₂ has been implemented in a device that exhibits both superior performance and environmental stability at frequencies above 40 GHz, with possible applications as a receiver beyond the cutoff frequency of a nanotransistor.     

Scheduling Algorithms for Packet-Oriented MAC Protocols in Wireless Multimedia Systems

Future generation wireless multimediacommunications will require efficient Medium AccessControl (MAC) protocols able to guarantee suitable Qualityof Service (QoS) levels for different traffic classes whileachieving a high utilization of radio resources. This paperproposes a new scheduling technique to be adopted at the MAClevel in wireless access systems, named Dynamic Scheduling-Time DivisionDuplexing (DS-TDD), that efficiently managesvideo, voice, Web and background traffics. A theoretical approachis proposed in this paper to evaluate the DS-TDD performance withvoice and Web traffics. Simulation results have permitted tohighlight the following promising characteristics of the DS-TDDscheme: (i) a high capacity of real-time traffics isattained with a QoS insensitive to Web and background trafficloads; (ii) a high throughput can be guaranteed whilepreserving the QoS levels of the different traffic classes;(iii) heavier downlink traffic loads do not modify the QoSof uplink traffics. Finally, extensive comparisons with differentscheduling schemes proposed in the literature have permitted tohighlight the better performanceof DS-TDD.     

Layered Video and Differentiated Coding for Adaptive QoS in Mixed Wired-Satellite Networks

Mobile networks are becoming nothing but a way to allow ubiquitous access to multimedia services. To allow efficient use of resources, new systems provide flexible bandwidth and different error protection techniques to match channel behavior. As the backbone network is increasingly becoming based on packet techniques and in particular on IP and related transport protocols, end to end service quality must be analyzed considering both the fixed and the mobile part. Source scalability may help in coping with a mixed and heterogeneous environment. In this work we present some results of a transmission chain comprising a scalable MPEG-2 coder, an IP network and a radio access exploiting the availability of satellites. It is shown that for a given target rate, differentiated coding can be exploited to achieve decodability and good quality at a channel SNR much lower that single layer streams. This revised version was published online in July 2006 with corrections to the Cover Date.     

Integrated Inductors Modeling for Library Development and Layout Generation

In this work we propose a modification to the conventional lumped equivalent circuit model for integrated inductors. Also the widely used parametric model is modified. The proposed models expand the frequency range where the integrated inductor behavior is accurately predicted. They are useful in developing automatic tools to assist the designers in selecting and automatically laying-out integrated inductors [1]. This work is based on measurements from integrated inductors fabricated in a standard silicon process.     

Dosage individualization of erythropoietin using a profile-dependent support vector regression

The external administration of recombinant human erythropoietin is the chosen treatment for those patients with secondary anemia due to chronic renal failure in periodic hemodialysis. The objective of this paper is to carry out an individualized prediction of the EPO dosage to be administered to those patients. The high cost of this medication, its side-effects and the phenomenon of potential resistance which some individuals suffer all justify the need for a model which is capable of optimizing dosage individualization. A group of 110 patients and several patient factors were used to develop the models. The support vector regressor (SVR) is benchmarked with the classical multilayer perceptron (MLP) and the Autoregressive Conditional Heteroskedasticity (ARCH) model. We introduce a priori knowledge by relaxing or tightening the epsilon-insensitive region and the penalization parameter depending on the time period of the patients' follow-up. The so-called profile-dependent SVR (PD-SVR) improves results of the standard SVR method and the MLP. We perform sensitivity analysis on the MLP and inspect the distribution of the support vectors in the input and feature spaces in order to gain knowledge about the problem.     

包含热模型的大功率MOSFET新型电路模型

功率转换器的功率密度越来越高，发热问题越来越严重，这种功率转换器的设计对现代大功率半导体技术提出了新的挑战；因而，热问题的优化设计和核实变得比大功率器件的电模型更加重要，本文提出一种新的PSPICE模型，可以利用它计算MOSFET芯片在瞬变过程中的温度。其中的热阻可以从制造商提供的产品使用说明书得到。本文介绍的模型提供发热和电气参数之间的动态关系。它建立了与许可的热环境的关系，例如，栅极驱动电路、负载、以及散热器的分析与优化设计。利用这个模型可以改善散热器的设计。由于决定功率损耗的参数是分布在一定范围内，受生产制造的影响很大，因而散热器的设计往往由于无法预先知道功率损耗而无法进行。