A Study of Ozone Generation by Negative Corona Discharge Through Different Plasma Chemistry Models

The Steady radial distribution of chemical species in a wire‐to‐cylinder ozone generator filled with pure oxygen has been computed by applying four different plasma chemistry models of increasing complexity. The most complete model considers ten species (e, O₂ ⁺, O₂ ^?, O₃ ^?, O^?, O₂, O₂(¹Δ_g), O₂(¹∑_g ⁺), O and O₃) and 79 reactions, including ionization by electron impact, electron attachment and detachment, electron-ion recombination, charge transfer, etc. The chemical model is coupled with the electrical model through Poisson's equation. The spatially averaged ozone density has been computed as a function of the current intensity and compared with the experimental values obtained by UV spectroscopy.     

Characteristics of a NaOH-Activated Blast Furnace Slag Blended with a Fine Particle Silica Waste

Mortars of blast furnace slag blended with a geothermal silica waste at various replacement levels of 0%, 5%, 10%, 15%, and 20% were cured for up to 90 days. The binder was activated by 6 wt% Na₂O equivalent of sodium hydroxide. Lime was added as an activating agent and also to promote pozzolanic reaction with the silica. It was found that the presence of the silica waste increased the reactivity of the cementitious materials, as measured by means of nonevaporable water. The compressive strength was increased in the presence of the silica, except at the highest replacement level of 20%, the optimum silica replacement was that of 5%–10%. The microstructures of blended slag showed less porosity than those of neat slag mortars. The lime was completely consumed after 90 days of hydration.     

Dynamic Policy-Based Network Management for a Secure Coalition Environment

This article reports the latest results of an R&D effort to develop a prototype implementation of a dynamic policy-based network management (PBNM) system that can be used to configure and manage a secure network for a coalition environment across an unsecured wide area network. The prototype, based on a distributed architecture, includes capabilities for policy creation and management, dynamic policy negotiation, and dynamic policy provisioning. The policy negotiation facilitates the rapid deployment of a coalition network while the dynamic policy provisioning automates the configuration and management of network services including firewalls, virtual private network connections, routing, quality of service (QoS), and domain name services. Such a PBNM system enhances an organization's ability to react to network incidents identified by a network situational awareness assessment. Although the focus of the current research is a military coalition environment, the system can be used in any distributed enterprise or collaborative environment     

Design optimization of 3D steel structures: Genetic algorithms vs. classical techniques

In this paper an elitist genetic algorithm (GA) developed by the authors is compared with common commercial solutions for complex structural optimization. After its prior validation on two-dimensional (2D) structures, the GA was tuned and improved in order to obtain structural elements with minimum weights that satisfy the ultimate limit states of the applicable building code. Subsequently, the same spatial structures were optimized using a commercial structural analysis program. Finally, the cost and weight improvements obtained using the GA, although at a higher computational cost, are discussed.     

Spectral nephelometry for making extravirgin olive oil fingerprints

In spectral nephelometry, absorption spectroscopy and nephelometry are innovatively combined to provide simultaneous online monitoring of color and turbidity of edible oils. Spectral nephelometry instrumentation consists of an optoelectronic device that measures the absorption spectrum of the oil sample at different angles. Data processing, carried out by principal component analysis (PCA), allows identification of the oil sample and creates a two-dimensional map as a fingerprint of oil types.     

The effect of support morphology on the reaction of oxidative dehydrogenation of ethane to ethylene at short contact times

The oxidative dehydrogenation of ethane is carried out in short contact time reactors over Pt and LaMnO₃ based catalysts supported on a large number of different ceramic substrates (45, 60 and 80 ppi foam monoliths and 200, 400, 600, 900 and 1200 cpsi honeycomb monoliths). Experimental results, obtained under the same conditions at varying the C₂H₆/O₂ ratio, showed that the highest performance in terms of ethylene selectivity and yield is always attained on LaMnO₃ catalysts. Furthermore, the results are significantly influenced by the morphology and cell density of the support, with 45 and 60 ppi foams and 400 and 600 cpsi honeycombs giving the best performance. The experimental results are explained by means of geometrical and fluid dynamic considerations on the support, and by means of a 2D mathematical model, which clearly indicates an optimal intermediate cell density for maximising ethylene selectivity and yield.     

利用新型合成仪器解决系统级测试难题

当今世界电子元件及产品正在加速发展，在大多数商业应用中，从设计到生产的周期现已缩短为只有六个月。而且，设备的内容及拓朴结构已经从单一功能元件迁移到多功能元件，进而还会迁移到整个子系统和系统中，在迁移时通常采用单个组件方案的形式（例如，用于智能电话和iPhone之类的设备）。现在，对于多载波功率放大器（MCPA）和软件定义的无线电（SDR）而言，直接软件控制和设备配置已司空见惯。例如RFIC之类的设备只能在混合信号环境中及实时条件下操作和测试。     

Towards a new definition of EPOC parameters for anionic electrochemical catalysts: case of propene combustion

The electrochemical promotion of catalysis (EPOC) of propene combustion was investigated using Pt sputtered thin film on an O²⁻ conductor, 8 mol% Y₂O₃-stabilized-ZrO₂ (YSZ). In order to separate the influence of the thermal migration of the O²⁻ oxide ions from the electrolyte to the catalyst surface and the impact of an electrical polarization on the catalytic activity, several light-off experiments (cool down and heat up procedures) were successively performed under different polarizations, i.e. OCV, +2 and −2 V. These experiments have clearly shown that the presence of O²⁻ (thermally or electrochemically induced) inhibits the catalytic activity of the platinum for the propene deep oxidation. These results demonstrate the importance to define a normalized rate enhancement ratio, ρ _n , from a reference value of the catalytic rate corresponding to a Pt surface state free of O²⁻ ions.     

Inspection and Process of Tension of Cables of General Rafael Urdaneta Bridge

In 1997 and 1999, inspection works were carried out in the 384 cable stays of the six central piers of General Rafael Urdaneta Bridge, located in Maracaibo, Venezuela. Inspection indicated the presence of water and significant settlings in the sockets of the cables and corrosion along each cable and socket. The tension of the cables was also measured, and differences of up to 30% in the tension of the cables of some of the 24 groups corresponding to the six central piers (four groups of 16 for each pier) were found. The results suggested the need to retension the cables. This paper shows the outcome of the inspection and indicates the procedure and results of the process of retension, finished in July 2000.     

Experimental Investigation of the Recovery of Soaked Paper Using Evaporative Freeze Drying

The aim of this article is to develop an experiment and a procedure to investigate the restoration of water-damaged paper and archival materials using freeze drying in order to allow a reproducible test and comparison of the influence of different operating conditions on drying time and restored paper quality. Firstly, a reproducible method for the preparation of soaked samples simulating water-damaged paper has been developed. Then, the samples have been freeze-dried in a laboratory-scale apparatus that allowed monitoring the temperature as well as the weight of the samples. The technique of evaporative freezing, which reduces the drying time required, has been used in this case. An innovative procedure for the visualization of the progress of the drying process has been validated, thus allowing the validation of a simple phenomenological model of the time evolution of the ice core volume; in addition, data on the residual moisture of the dried paper sheets in different zones have been given. Finally, optimization of this particular drying process by using simple or more sophisticated approaches has been discussed.