Robustness issues in optimal control of unstable plants

This paper presents a robustness analysis of the optimal solution of the step tracking problem in a one-degree of freedom control architecture, for the discrete-time multivariable (MIMO) case. It is shown that the resulting closed loop becomes arbitrarily fragile, i.e. the sensitivity peak becomes arbitrarily large, for certain reference directions. The cause of this problem is that the optimal controller depends on the reference direction. The paper shows that this dependence can be eliminated with an alternative formulation of the optimal problem where the cost is averaged over all reference directions.     

包含热模型的大功率MOSFET新型电路模型

功率转换器的功率密度越来越高，发热问题越来越严重，这种功率转换器的设计对现代大功率半导体技术提出了新的挑战；因而，热问题的优化设计和核实变得比大功率器件的电模型更加重要，本文提出一种新的PSPICE模型，可以利用它计算MOSFET芯片在瞬变过程中的温度。其中的热阻可以从制造商提供的产品使用说明书得到。本文介绍的模型提供发热和电气参数之间的动态关系。它建立了与许可的热环境的关系，例如，栅极驱动电路、负载、以及散热器的分析与优化设计。利用这个模型可以改善散热器的设计。由于决定功率损耗的参数是分布在一定范围内，受生产制造的影响很大，因而散热器的设计往往由于无法预先知道功率损耗而无法进行。     

WAIS-R Information subtest item bias for Canadian high school students.

The WAIS-R Information subtest was combined with 21 potential substitute Canadian content items and group-administered to 119 high school students ranging in age from 16 to 19 years. Seven acceptable substitute items were identified. Mean scores on the American items for the 16-17 and 18-19 age groups suggested that Canadians of these ages are not penalized by American content with respect to either Verbal or Full Scale IQ. Nevertheless, the research identified eight Information items, four easier and four more difficult than the standard WAIS-R implies. Similar results were noted in two previous studies of the WAIS-R, and indicate the extreme caution required for the clinical interpretation of intra test scatter. There is also evidence that item difficulty within the Information subtest may vary with the age of the subject. These results were considered indicative of the necessity for Canadian content Information items and the development of Canadian norms for an adapted WAIS-R Information subtest. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Targeting optimum resource allocation using reverse problem formulations and property clustering techniques

Decoupling the constitutive equations from the balance and constraint equations allows for reformulating a conventional forward problem into two reverse problems. The first reverse problem is the reverse of a simulation problem, where the process model is solved in terms of the constitutive (synthesis/design) variables instead of the process variables, thus providing the synthesis/design targets. The second reverse problem (reverse property prediction) solves the constitutive equations to identify unit operations, operating conditions and/or products by matching the synthesis/design targets. Visualization of the problem is achieved by employing recently developed property clustering techniques, which allows a high-dimensional problem to be visualized in two or three dimensions. The clusters by definition satisfy intra-stream and inter-stream conservation through linear “mixing” rules, which allows for the development of consistent additive rules along with their ternary representation.     

Wake and aerodynamics loads in multiple bodies—application to turbomachinery blade rows

Two-dimensional, unsteady flow around bodies of complex geometry (or multiple bodies) at high Reynolds number is simulated using the vortex method. This method is modified to take into account the sub-grid scale phenomena through a second order velocity structure function model adapted to the Lagrangian scheme. The dynamics of the body wake is computed using the convection-diffusion splitting algorithm; the convection process is carried out with a Lagrangian Adams-Bashforth time-marching scheme and the diffusion process is simulated using the random walk method. The pressure distribution is obtained using an integral equation derived from the pressure Poisson equation, which was first developed for a single body. Results for the numerical simulation around a linear cascade of airfoils are presented. As the flow is periodic in the y direction, the discrete vortex shedding need only be considered for a reference airfoil. The flow characteristics around the NACA 65-410 series airfoils are calculated and comparisons are made with results available in the literature.     

Deep oxidation of VOC mixtures with platinum supported on Al2O3/Al monoliths

Pt impregnated metallic monoliths prepared from anodised aluminium foils were tested to study their catalytic activity in complete oxidation of volatile organic compound (VOC) mixtures. The VOCs oxidised were 2-propanol, toluene, methyl ethyl ketone (MEK), acetone and their mixtures. Complete oxidation was obtained in all cases except for the case of 2-propanol, where acetone was found as an oxidation intermediate. Even if the adsorption of the VOC on the Al₂O₃ is governed by its polarity, the reactivity is mainly affected by the competition of the oxygen atoms chemisorbed on the Pt particles.     

Molecular dynamics simulations of polyphosphazenes: poly[bis(chloro)phosphazene][NPCl2] n

Suitable parameter sets for the CHARMm force field were derived for the structural units in polychlorophosphazene [P=N, P N, P Cl] using the Dinur Hagler energy second derivative procedure based on quantum mechanical SCI calculations using the 6–31G^* basis set. To validate the reliability of the parameter set, structural results obtained with CHARMm for the adopted model compounds (OP₂NCl₅ and OP₃N₂Cl₅) were compared with those derived fromab initio quantum mechanics using the 6–31G^* basis set. Application of molecular dynamics (MD) simulations in combinatioin with the available X-ray diffraction data provided structural and conformational information on the polymer. The calculation made using the periodic boundary conditions (PBC) agree well with the polychlorophosphazene ordered in a monoclinic unit cell (a=5.98,b=12.99,c=4.92 A; β=111.7). This model was stabilized mainly by the image atoms contribution to the electrostatic energy term and had aquasi-planar conformation of the backbone chain (glide symmetry). The MD calculations also provided evidence that the difference between single and double PN bonds is less marked than that measured experimentally. This result is, however, in agreement with more recent and accurate X-ray studies on poly(methylphosphazene). Validation of the polymer model provided a complete picture, otherwise experimentally inaccessible, of the internal fluctuations of the polymeric chains.     

Finite element analysis of partly wrinkled reinforced prestressed membranes

Wrinkling is a well known phenomenon experimented by tension membranes in Civil Engineering applications. This paper will present an efficient numerical technique for the computational simulation of such wrinkles in a prestressed membrane. In particular, the relaxed energy approach (Pipkin in IMA J Appl Math 36:85–99, 1986) is particularized for prestressed membranes (Gil in Textile composites and inflatable structures, CIMNE, 2003) undergoing moderate strains. Wrinkling conditions in terms of the Euler-Lagrange finite deformation tensor along principal directions will be obtained. This will provide a framework to describe properly the initial instant when wrinkles start to be encountered in a prestressed Saint Venant–Kirchhoff hyperelastic membrane. Subsequently, a modified Helmholtz’s free energy functional will be introduced with the purpose of describing the modified constitutive behaviour of the continuum after the onset of wrinkling. Consistent derivations of the stress tensor as well as the constitutive tensor will de depicted. The results will be particularized for membranes and cables in a Finite Element discretization basis. Some numerical examples will prove the accuracy and robustness of the described algorithm.     

Automated model generation for performance engineering of building automation networks

Large technical systems need to be designed both reliable and efficient. Specialized design tools offer therefore a simplified, abstract design and extend details autonomously in the background. Analytic and simulation based models could improve the quality by testing and dimensioning the design before implementation, but setting up the necessary models is time-consuming and expensive. Therefore many developers ask for analysis tools which are able to create their models from the available information in the design tools. This paper presents such an automated modeling approach basing on an existing design database at the example of a network analysis for building automation fieldbuses. The process of automated modeling is unfolded, and the potentials and limitations are discussed.     

Effects of organic farming on minerals contents and aroma composition of Clemenules mandarin juice

Consumers demand organic products because they believe that the organic products are more flavorful and respectful to the environment and human health. The effects of organic farming on the minerals contents and aroma composition of Clemenules mandarin juices were studied. Minerals (Fe, Cu, Mn, Zn, Ca, Mg, K, and Na) were quantified using atomic absorption-emission spectroscopy, while volatile compounds were extracted using the dynamic headspace technique and were identified and quantified by GC–MS. In general, organic farming produced a mandarin juice with a higher quality than that produced by conventional agricultural practices. Higher concentrations of both minerals and positive volatile compounds were found in the organic juice, while the formation of off-flavors was higher in the conventional juice, although threshold values were not reached.