Analytic methods for modeling longitudinal data from rolling therapy groups with membership turnover.

Interventions for a variety of emotional and behavioral problems are commonly delivered in the context of treatment groups, with many using rolling admission to sustain membership (i.e., admission, dropout, and discharge from group are perpetual and ongoing). The authors present an overview of the analytic challenges inherent in rolling group data and outline commonly used (but flawed) analytic and design approaches to addressing (or sidestepping) these issues. Moreover, the authors propose use of latent class pattern mixture models (LCPMMs) as a statistically and conceptually defensible approach for modeling treatment data from rolling groups. The LCPMM approach is illustrated with rolling group data from a group-based alcoholism pilot treatment trial (N = 128). Different inferences were made with regard to treatment efficacy under LCPMM vs. the commonly used standard group-clustered latent growth model (LGM); coupled with other preliminary findings in this area, inferences from LGMs may be overly liberal when applied to data from rolling groups. Continued work on data analytic difficulties in groups with membership turnover is critical for furthering the ecological validity of research on behavioral treatments. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Modeling Crosstalk Effects in CNT Bus Architectures

Carbon nanotubes (CNTs) have been widely proposed as interconnect fabric for nano and very deep submicron (silicon-based) technologies due to their robustness to electromigration. In this paper, issues associated with crosstalk among bus lines implemented by CNTs are investigated in detail. CNT-based interconnects are modeled and the effects of crosstalk on performance and correct operation are evaluated by simulation. Existing models are modified to account for geometries in bus architectures made of parallel single-walled nanotubes and a single multiwalled nanotube. New RLC equivalent circuits are proposed for these bus architectures. A novel bus architecture with low crosstalk features is also proposed. This bus architecture is made of dual-walled nanotubes arranged in parallel. In this architecture, the crosstalk-induced delay and corresponding uncertainty (as well as crosstalk-induced peak voltage) are significantly reduced; a modest area penalty is incurred. Reductions up to 59% for the crosstalk-induced delay and up to 81% for the crosstalk-induced peak voltage are reported. These results confirm that the proposed bus arrangement noticeably improves performance and provides reliable operation     

包含热模型的大功率MOSFET新型电路模型

功率转换器的功率密度越来越高，发热问题越来越严重，这种功率转换器的设计对现代大功率半导体技术提出了新的挑战；因而，热问题的优化设计和核实变得比大功率器件的电模型更加重要，本文提出一种新的PSPICE模型，可以利用它计算MOSFET芯片在瞬变过程中的温度。其中的热阻可以从制造商提供的产品使用说明书得到。本文介绍的模型提供发热和电气参数之间的动态关系。它建立了与许可的热环境的关系，例如，栅极驱动电路、负载、以及散热器的分析与优化设计。利用这个模型可以改善散热器的设计。由于决定功率损耗的参数是分布在一定范围内，受生产制造的影响很大，因而散热器的设计往往由于无法预先知道功率损耗而无法进行。     

Wake and aerodynamics loads in multiple bodies—application to turbomachinery blade rows

Two-dimensional, unsteady flow around bodies of complex geometry (or multiple bodies) at high Reynolds number is simulated using the vortex method. This method is modified to take into account the sub-grid scale phenomena through a second order velocity structure function model adapted to the Lagrangian scheme. The dynamics of the body wake is computed using the convection-diffusion splitting algorithm; the convection process is carried out with a Lagrangian Adams-Bashforth time-marching scheme and the diffusion process is simulated using the random walk method. The pressure distribution is obtained using an integral equation derived from the pressure Poisson equation, which was first developed for a single body. Results for the numerical simulation around a linear cascade of airfoils are presented. As the flow is periodic in the y direction, the discrete vortex shedding need only be considered for a reference airfoil. The flow characteristics around the NACA 65-410 series airfoils are calculated and comparisons are made with results available in the literature.     

A new epitope presenting system displays a HIV-1 V3 loop sequence and induces neutralizing antibodies

The principal neutralizing domain, IGPGRAF sequence, from the V3-loop of HIV-1 was inserted in two positions on the surface of the protein that makes up the capside shell of the insect Flock House Virus. The hybrid proteins were expressed in insect cells via recombinant baculoviruses. Three different hybrids were used as immunogens: two with a single copy of the insert in different positions of the carrier protein and a third with two copies of the insert at the same positions as before. All hybrid proteins induced strong and broad specific immune response in guinea pigs against different V3-loop sequences. However, only one of the hybrid proteins was able to induce a strong neutralizing response against MN and IIIB HIV-1 isolates. Our results demonstrate that a very short peptide sequence of HIV-1 can constitute a valuable immunogen able to induce a neutralizing response if presented to the immune system in the context of the FHV capsomer structure.     

Energy and comfort: A new type for TRNSYS

Two subroutines have been developed which permit users of the TRNSYS programme to calculate the parameters of ambiental comfort (PMV and PPD).The first subroutine deals with the calculation of the view factors inside a room for all the values of the spatial coordinates and, thus, permits the average radiant temperature to be calculated in every position. The second subroutine has been developed in accordance with the indications of the ISO 7730 standard.Both subroutines have been validated and then interfaced to TRNSYS.The integrated programme has been utilised to compare the performances of different heating systems in terms of energy consumption and comfort, maintaining the temperature of the interior constant for different climatic conditions.     

Comparative Rheomechanical and Adhesive Properties of Two Hydrocolloid Dressings: Dependence on the Degree of Hydration

Hydration is believed to modify the mechanical properties (resistance to stress) and the rheological (viscoelastic) properties of hydrocolloid dressings. Rheomechanical properties in turn influence adhesional properties. In this work the relationships between the degree of hydration and the rheomechanical and the adhesive properties of two different commercial dressings (regular and nondispersive) were investigated. The two dressings showed different hydration characteristics. The regular dressing takes up water rapidly and tends to reach saturation after 12 hr. As the dressing swells and loses its integrity there is an accompanying reduction of both rheomechanical and adhesive properties. The nondispersive dressing exhibits a linear water uptake profile over extended periods of hydration up to 4 days. It does not swell and its rheomechanical and adhesive properties remain unchanged after hydration, The comparative evaluation of the results obtained with the various methods points to the relevance of mechanical and viscoelastic properties to the functionality assessment of dressings.     

Finite element analysis of partly wrinkled reinforced prestressed membranes

Wrinkling is a well known phenomenon experimented by tension membranes in Civil Engineering applications. This paper will present an efficient numerical technique for the computational simulation of such wrinkles in a prestressed membrane. In particular, the relaxed energy approach (Pipkin in IMA J Appl Math 36:85–99, 1986) is particularized for prestressed membranes (Gil in Textile composites and inflatable structures, CIMNE, 2003) undergoing moderate strains. Wrinkling conditions in terms of the Euler-Lagrange finite deformation tensor along principal directions will be obtained. This will provide a framework to describe properly the initial instant when wrinkles start to be encountered in a prestressed Saint Venant–Kirchhoff hyperelastic membrane. Subsequently, a modified Helmholtz’s free energy functional will be introduced with the purpose of describing the modified constitutive behaviour of the continuum after the onset of wrinkling. Consistent derivations of the stress tensor as well as the constitutive tensor will de depicted. The results will be particularized for membranes and cables in a Finite Element discretization basis. Some numerical examples will prove the accuracy and robustness of the described algorithm.     

Effect of steel fibres at two different stages: The material and the structure

The addition of steel fibres to plain concrete is intended both to improve the material's ductility and that of the structure in which it is used. These two effects of steel fibres are clearly distinguishable through an analysis of cracking both at a local and a global level. This analysis is essential if the use of steel fibres is to be optimized.     

Ionoluminescence decay measured with single ions

A new ion beam analysis-based, single ion technique called the time to first photon has been developed to measure the decay of the luminescence signal of phosphors. Such measurements are currently needed to study luminescence decay mechanisms following high-density excitations and to identify strongly luminescent phosphor coatings with short lifetimes for ion photon emission microscopy (IPEM). The samples for this technique consist of thin phosphor layers placed or coated on the surface of PIN diodes. Single ions from an accelerator strike this sample and simultaneously create ion beam induced luminescence (IBIL) from the phosphor that is measured by a single-photon-detector, and an ion beam induced charge collection (IBICC) signal in the PIN diode. In this case, the IBICC signal provides the start pulse and the IBIL signal the stop pulse to a time to amplitude converter. It is straightforward to show that this approach also measures a signal proportional to activity versus time with an accuracy of 5% as long as the number of detected photons per ion is less than 0.1, which usually requires the use of absorbers for the IBIL detector or electronic discrimination for the IBIL signals. Details of the new analysis are given together with examples of luminescence decay measurements of several ceramic phosphors being considered to coat IPEM samples. IPEM is currently being developed at Sandia National Laboratory (SNL), the University of North Texas in Denton, and the Universities and INFN of Padova and Torino.