Cognition and its disembodiment: Some comments on Freud scholarship.

G. Frank's (1996) argument that instinct theory is "an untenable model from which to generate ideas about personality, psychopathology or treatment" (p. 421) and is best replaced by the construct of belief rests on a caricatured representation of Freud's instinct theory. Frank's rendering of instinct theory is bereft of complexity and is based on a selected and tilted reading of Freud. A more balanced reading of Freud, contemporary Freudians, and current views of the interface of psychoanalysis, neuroscience, and evolutionary theory yields different conclusions regarding instinct theory, the dynamic unconscious, unconscious fantasy, and their relations to treatment. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Organizational human factors as barriers to energy efficiency in electrical motors systems in industry

This paper presents a study accomplished in the State of Parana in Southern Brazil, aiming at verifying the correlation between organizational human factors (OHF) and the level of energy losses in organizations. The purpose is to subsidize the formularization of institutional policies in organizations to improve the energy efficiency in the productive sector. The research was carried out in ten industries of the following sectors: pulp and paper; food; wood and chemical products. The losses of electric energy were determined in motor systems with the aid of a mathematical model and the evaluation of 27 OHF identified in the literature review was made with the supervisors in the industries by means of a structurized questionnaire. Seven OHF had presented significant correlation with energy losses and six of them are inversely proportional to the losses, in accordance with linear regression analysis. The inversely proportional factors to the losses also with significant correlation are considered determinative OHF and constitute barriers for energy efficiency in organizations. These barriers are linked with the following organizational areas: management system; education of employees; strategical vision. The study recommends the implementation of the determinative OHF in organizations as a way to transpose the human barriers for energy efficiency.     

Total Friction Loss along Multiple Outlets Pipes with Open End

This paper describes the derivation of the total direct and relative reduction factors for both discrete and continuous outflow along mixed service sections of close end multiple outlets pipes. Discrete outflow factors depend on the numbers of outlets along the section and the entire pipeline, while for continuous distribution there is no such dependence. Solutions for close end pipes are also derived. The total relative factors are related to those previously calculated total factors for close end pipes. The concept of “effectiveness” is presented here for close and open end pipes by taking into account the friction loss occurred downstream of the first outlet, resulting in both head and flow variation between that upstream outlet and the remaining outlets along the line. The dependence upon the extremity spacing is also considered. There are also proposed formulations for mixed factors for intermediate sections between two locations along a close end pipe.     

Early development of properties in a cement paste: A numerical and experimental study

This paper presents the results of an experimental and numerical study of the properties of a high-performance Portland cement paste (w/c ratio 0.37; 5% silica fume) cured at 20 °C in sealed conditions for 5 days. Properties such as electrical conductivity, strength, stiffness, porosity, Vicat penetration, and autogenous deformation were measured and modelled. The kinetics of hydration was studied by means of isothermal calorimetry. The numerical simulations were performed with CEMHYD3D, developed at the National Institute of Standards and Technology, and HYMOSTRUC, developed at the Delft University of Technology. The results of the simulations were compared with experimental data, and the match was good. Clear correlations were found among electrical conductivity, autogenous shrinkage, and connectivity of solids.     

Test and evaluation of a solar powered gas turbine system

This paper describes the test and the results of a first prototype solar powered gas turbine system, installed during 2002 in the CESA-1 tower facility at Plataforma Solar de Almería (PSA) in Spain. The main goals of the project were to develop a solar receiver cluster able to provide pressurized air of 1000 °C and solve the problems arising from the coupling of the receivers with a conventional gas turbine to demonstrate the operability of the system. The test set-up consists of the heliostat field of the CESA-1 facility providing the concentrated solar power, a pressurized solar receiver cluster of three modules of 400 kWth each which convert the solar power into heat, and a modified helicopter engine (OST3) with a generator coupled to the grid. The first test phase at PSA started in December 2002 with the goal to reach a temperature level of 800 °C at the combustor air inlet by the integration of solar energy. This objective was achieved by the end of this test phase in March 2003, and the system could be operated at 230 kWe power to grid without major problems. In the second test phase from June 2003 to August 2003 the temperature level was increased to almost 1000 °C. The paper describes the system configuration, the component efficiencies and the operation experiences of the first 100 h of solar operation of this very successful first test of a solar operated Brayton gas turbine system.     

Novel Low‐Power High‐dB Range CMOS Pseudo‐Exponential Cells

In this paper, novel CMOS pseudo‐exponential circuits operating in a class‐AB mode are presented. The pseudo‐exponential approximation employed is based on second order equations. Such terms are derived in a straightforward way from the inherent nonlinear currents of class‐AB transconductors. The cells are appropriate to be integrated in portable equipment due to their compactness and very low power consumption. Measurement results from a fabricated prototype in a 0.5 μm technology reveal a range of 45 dB with errors lower than ±0.5 dB, a power consumption of 100 μW, and an area of 0.01 mm².     

Monodisperse and Corrosion-Resistant Metallic Nanoparticles Embedded into Sepiolite Particles for Optical and Magnetic Applications

The preparation of large quantities of heterogeneous materials containing non-agglomerated and monodispersed nanoparticles is becoming one of the bottlenecks that hinders the development of commercial devices. Here we describe a method to prepare monodispersed metallic (Cu, Ag, Au, Ni, Co, and Fe) nanoparticles in a silicate matrix (sepiolite) by means of a reduction process of metallic cations associated with a dehydration process of the matrix. This process is characterized by the huge amount of monodispersed metallic nanoparticles that it produces. Additionally, these nanoparticles have been revealed to be remarkably stable against oxidation because the transformed sepiolite matrix becomes a diffusion barrier for oxygen. Furthermore, the nanoparticles present suitable properties to be used for optical and magnetic applications.     

State detection and control of overloads in the anaerobic wastewater treatment using fuzzy logic.

The two-stage anaerobic wastewater pre-treatment was modelled and controlled. The biological state of the reactors could be predicted using a fuzzy logic system and based upon this, proper control actions were taken automatically in order to avoid an overload. The system was designed to handle very strong fluctuations in the concentration of the substrate and the volumetric loading rate. Hydrogen concentration together with methane concentration, gas production rate. pH and the filling level of the acidification buffer tank were used as input variables for the fuzzy logic system. The manipulated variables were the flow rate from the acidification buffer tank into the methane reactor, the temperature and pH of both reactors, the circulation rate of the fixed bed reactor, back flow from the methane reactor into the acidification, and the control of the feed into the acidification buffer tank. The developed control system was successfully tested on a fully automated lab scale two-stage anaerobic digester. Different types of wastewater from food processing industries were successfully applied. Even a restart of feeding with very high COD concentrations (100 gl(-1) after several days of stand by was handled successfully. Effluent concentrations could be kept low without using TOC, COD or equivalent measurements.     

The SPQR experiment: detecting damage to orbiting spacecraft with ground-based telescopes

The objective of the Specular Point-like Quick Reference (SPQR) experiment was to evaluate the possibility of improving the resolution of ground-based telescopic imaging of manned spacecraft in orbit. The concept was to reduce image distortions due to atmospheric turbulence by evaluating the Point Spread Function (PSF) of a point-like light reference and processing the spacecraft image accordingly. The target spacecraft was the International Space Station (ISS) and the point-like reference was provided by a laser beam emitted by the ground station and reflected back to the telescope by a Cube Corner Reflector (CCR) mounted on an ISS window. The ultimate objective of the experiment was to demonstrate that it is possible to image spacecraft in Low Earth Orbit (LEO) with a resolution of 20 cm, which would have probably been sufficient to detect the damage which caused the Columbia disaster. The experiment was successfully performed from March to May 2005. The paper provides an overview of the SPQR experiment.