Mycobacterium behavior in wastewater treatment plant, a bacterial model distinct from Escherichia coli and Enterococci

Mycobacteria are waterborne emerging pathogens causing infections in human. Mycobacteria have been previously isolated from wastewater and sludge, but their densities were not estimated due to cultural biases. In order to evaluate the impact of wastewater treatment processes on mycobacteria removal, we used a real time PCR method. First we compared six DNA extraction methods and second we used the more efficient DNA extraction procedure (i.e., enzymatic lysis combined with hexadecyltrimethylammonium bromide-NaCl procedure) in order to quantify Mycobacterium. With the aim to identify parameters that could serve as indicator of mycobacterial behavior, mycobacterial densities were measured in parallel to those of Escherichia coli and enterococci, and to concentrations of chemical parameters usually monitored in wastewater. Mycobacterium reached 5.5 × 10? ± 3.9 × 10? copies/L in the influent, but was not detected in the effluent after decantation and biofiltration. Most mycobacteria (98.6 ± 2.7%, i.e. 2.4 ± 0.7 log??) were removed by the physical-chemical decantation, and the remaining mycobacteria were removed by biofiltration. In contrast, enterococci and E. coli were lightly removed by decantation step and mainly removed by biofiltration. Our results showed that Mycobacterium corresponds to a hydrophobic behavior linked to insoluble compound removal, whereas enterococci and E. coli refer to hydrophilic behaviors linked to soluble compound removals.     

Accumulation parameters and seasonal trends for PCBs in temperate and boreal forest plant species

The concentration of polychlorinated biphenyls (PCBs) in the air and vegetation was measured periodically in two alpine forests, during the growing season. Foliage samples from nine plant species typical of the temperate and boreal environment were collected and analyzed. Leaf concentrations of tri- and tetra-CBs showed fast response times with changing temperature and gas-phase concentrations, suggesting that a partitioning equilibrium is approached relatively rapidly (few days) in the field. Heavier compounds showed kinetically limited accumulation trends, not reaching equilibrium during the growing season. Results were used to estimate the bioconcentration factors or equilibrium plant/air partition coefficient (KPA) for each species. Values of log KPA (calculated on a mass/volume basis) ranged between 0.78 and 1.96 and were correlated to the log KOA. Uptake trends of the higher chlorinated compounds showed intraspecific differences which were partially explained by the specific leaf area (SLA).     

Influence of α-dicarbonyl compounds to the molecular weight distribution of melanoidins in sucrose solutions: part 1

The correlations between formation of melanoidins and the content of α-dicarbonyl compounds and colour formation were studied in Maillard reaction model sucrose solutions at high treating temperatures (130 °C) corresponding to the industrial sucrose processing. Molecular weight distribution was determined by gel permeation chromatography (GPC) and α-dicarbonyls as high reactive intermediates of the Maillard reaction were detected by RP-HPLC and GC/MS. Referring to formation of melanoidins, new knowledge could be gained. The investigations clearly point out, that individual α-dicarbonyls are involved in formation of specific molecular weight fractions. 3-Deoxyhexosulose (3-DH) and methylglyoxal are the important α-dicarbonyl compounds in thermal-treated sucrose solutions. A low molecular weight fraction with a molecular weight range of <5,800 g/mol preferably occurs when 3-DH is formed in high concentrations. The high increase in intensity of a low molecular weight fraction is combined with a strong colour formation. In contrast to 3-DH, methylglyoxal promotes the formation of high molecular weight fractions between 6,600 g/mol and approximately 17,000 g/mol. Furthermore, model solutions with a high intensity of high molecular weight fractions show an early colour formation during the starting period of the reaction. Indeed, this early browning is not as intensive as the colour formation caused by the low molecular weight fraction during the later stage of the browning reaction. Out of this, 3-DH can be regarded as the most important intermediate for an intensive colour formation in sucrose solutions.     

Screening of mycotoxin multicontamination in medicinal and aromatic herbs sampled in Spain

BACKGROUND: The aim of this study was to screen the multicontamination by mycotoxins in a wide variety of aromatic and/or medicinal herb samples collected in Spain. Mycotoxins studied were aflatoxins (AFs), ochratoxin A (OTA), zearalenone (ZEA), deoxynivalenol (DON), T‐2 toxin (T‐2), citrinin and fumonisins (FBs). Mycotoxins were analysed by ELISA after a clean‐up step with multifunctional columns (AFs, ZEA, DON, FBs and T‐2) or polyamide column (citrinin). RESULTS: Of the 84 samples analysed 99% were contaminated with T‐2, 98% with ZEA, 96% with AFs, 63% with OTA, 62% with DON, 61% with citrinin and 13% with FBs. Nearly 87% of samples contained four or more mycotoxins simultaneously, being AFs, T‐2 and ZEA the mycotoxins co‐existing in almost every sample. 100% of the samples in our study were multicontaminated. CONCLUSION: This study shows that this kind of commodity could be an important source of mycotoxin contamination and, in general, this contamination is not limited to only one group of mycotoxins. Mycotoxin contamination on artichoke immature florets, boldus leaves, burdock leaves, dandelion plant, frangula bark, ginkgo leaves, lemon verbena leaves, olive leaves, red tea leaves, ribgrass leaves, St Mary's thistle seeds, spearmint leaves, star anise fruit, vervain and white tea leaves has been described for the first time. Finally, this is the first report on DON and T‐2 presence in herbs. No study of this kind has been previously developed in Spain. Copyright © 2009 Society of Chemical Industry     

In situ degradability of conventional and unconventional starch sources for ruminants,and factors determining their washable fraction: methodological implications

BACKGROUND: The in situ technique (IS) is used for characterising, screening and evaluating feedstuffs in ruminants. However, it is often not adapted to the particular characteristics of feeds (i.e. kinetics of starchy feeds with a standard framework used in forage). This may lead to potential biases in the final conclusions. In two successive experiments, we evaluated the degradative characteristics of conventional (CON) and unconventional (UNC) starchy feedstuffs (ING) and factors affecting their washable fractions (WF). The suitability of IS was then assessed. RESULTS: Two well‐defined ruminal fermentation patterns (CON and UNC) were observed. The WF and insoluble washable (ISWF) fractions were affected by ING, state of presentation [WAY, fresh (F) or pre‐dried (D)], particle size (PSI) and their interactions. The UNC and F feeds had greater WF and ISWF than CON and D, respectively. Increasing PSI linearly reduced WF and its proportion of ISWF. CONCLUSION: The PSI and WAY are critical factors to consider when designing experiments for the evaluation of starchy feedstuffs for ruminants using IS. It is still very risky to propose ‘standard’ parameters as this will always depend on the particular ING evaluated. Conducting pre‐evaluation tests before implementing each research protocol could help to refine the procedure. Copyright © 2009 Society of Chemical Industry     

Modulation of rheological properties by heat-induced aggregation of whey protein solution

Heat-induced protein aggregation at low protein concentrations generally leads to higher viscosities. We here report that aggregated protein can yield weaker gels than those from native protein at the same concentration. Aggregated protein was produced by heating a solution of whey protein isolate (WPI) at 3% and 9% w/w. The higher protein concentration resulted in a larger aggregate size and a higher intrinsic viscosity. The protein fraction in native WPI had the smallest size and the lowest intrinsic viscosity. The same trend was observed for the shear viscosity after concentrating the suspensions containing aggregates to around 15% w/w. Suspensions containing aggregates that were produced from a higher concentration possessed a higher viscosity. After reheating the concentrated suspensions, the suspension from the 9% w/w aggregate system produced the weakest gel, followed by the one from 3% w/w, while the native WPI yielded the strongest gel. Reactivity of the aggregates was also an important factor that influenced the resulting gel properties. We conclude that aggregation of whey protein solution is a feasible route to manipulate the gel strength of concentrated protein systems, without having to alter the concentration of the protein.     

Inhibition of α-amylase activity by condensed tannins

The ability of grape seed procyanidins to inhibit α-amylase activity was studied using a colorimetric method. This ability was found to be related with the average degree of polymerisation of the tested procyanidins. These interactions were further evaluated by fluorescence quenching, dynamic light scattering (DLS) and nephelometry, in order to understand the mechanisms by which they occur. A relationship between aggregate formation and enzymatic inhibition was observed. The interaction between procyanidins and enzyme involves a specific interaction as inferred from the calculated apparent bimolecular quenching constant in the fluorescence assays. Further experiments involved the determination of the effect of carbohydrates on the enzymatic inhibition observed. It was shown that pectin and arabic gum inhibited the formation of insoluble aggregates but were unable to restore fluorescence and activity to the enzyme. This suggests that these carbohydrates resulted in a decrease in turbidity due to the formation of a ternary complex with protein/polyphenol.     

In vivo antitumoural activity and composition of an oil extract of Brazilian propolis

The present study aimed to evaluate in vivo and in vitro the antitumoural activity of a propolis extract obtained with edible vegetable oil and its fractions and also to investigate its chemical composition by LC–MS and LC–MS/MS. To evaluate the toxicological aspects related to the propolis extract treatment, hematological, biochemical, histopathological and morphological analyses of treated animals were performed. All propolis extracts showed an in vivo antitumour activity in the experimental model with a moderate toxicity effect at experimental exposure levels. The oil extract was as effective as the ethanolic extract at inhibiting tumour growth. In vitro assays showed that the whole oil extract produced better inhibition of tumour cells than its fractions. LC–MS and LC–MS/MS identified four phenolic acids and three flavonoids. The anticancer potential of the oil extract of propolis has been demonstrated and the edible vegetable oil was shown as an attractive alternative solvent to extract bioactive natural propolis components.