Spin valve effect in sputtered FL-MoS2 and ferromagnetic shape memory alloy based magnetic tunnel junction

In the last decade, two-dimensional (2D) transition metal dichalcogenides have been introduced with great significance in the spintronic devices for their extraordinary electrical, optical, and spin-dependent properties. In this work, we have fabricated a few-layer molybdenum disulfide (FL-MoS₂) (~6 nm) as a non-magnetic spacer layer in Ni–Mn–In/FL-MoS₂/Ni–Mn–In magnetic tunnel junction (MTJ) using DC magnetron sputtering. FL-MoS₂ thin film sandwiched between two ferromagnetic shape memory alloy based electrodes exhibit semiconducting behavior, confirmed by current-voltage (I–V) characteristics and temperature dependent resistance measurement. The fabricated MTJ shows spin valve effect in the presence of an external magnetic field. The tunneling magnetoresistance (TMR) has been recorded in 10 K–300 K temperature range. The highest TMR ratio of 0.51% was obtained at a low temperature ~10 K, corresponding to the spin polarization of ~5%. This TMR ratio reduces to a value of 0.032% as the temperature of the device increases up to 300 K, displaying a finite TMR at room temperature. A detailed study of thickness and temperature-dependent magnetization versus magnetic field (M ? H) hysteresis loops of Ni–Mn–In thin films has been performed to understand the complex TMR behavior. The present study paves the way for the use of sputtered FL-MoS₂ and ferromagnetic shape memory alloy in ultrafast spintronics for advanced magnetic devices application.     

Nanoparticle‐loaded UV‐blocking contact lenses

We have developed a novel approach of incorporating UV‐blocking features into contact lenses by dispersing nanoparticles into the lenses. The nanoparticles are prepared by controlling polymerization dynamics using chain terminating and chain transfer agents. A theoretical model is developed to predict the effect of various formulation parameters on the particle size. This approach can produce UV‐blocking nanoparticles of controlled size below 10 nm in diameter with close to 10% conversion. The model predictions for the mean size are in reasonable agreement with the experimental data. The nanoparticles are cleaned and loaded in silicone hydrogel contact lenses by soaking the lenses in a solution of particles in ethanol and acetone. Lenses loaded with about 6% particles w/w in the hydrated lens block sufficient UV light to be classified as Class 1 blockers. The nanoparticles are retained in the lens during soaking in phosphate buffered saline (PBS) and are stable to sterilization by autoclaving. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42495.     

Nanohydroxyapatite-coated hydroxyethyl cellulose/poly (vinyl) alcohol electrospun scaffolds and their cellular response

The present study focused on the preparation of nanohydroxyapatite (nHA)-coated hydroxyethyl cellulose/polyvinyl alcohol (HEC/PVA) nanofibrous scaffolds for bone tissue engineering application. The electrospun HEC/PVA scaffolds were mineralized via alternate soaking process. FESEM revealed that the nHA was formed uniformly over the nanofibers. The nHA mineralization enhanced the tensile strength and reduced the elongation at breakage of scaffolds. The wettability of the nanofibrous scaffolds was significantly improved. The in vitro biocompatibility of scaffolds was evaluated with human osteosarcoma cells. nHA-coated scaffolds had a favorable effect on the proliferation and differentiation of osteosarcoma cell and could be a potential candidate for bone regeneration.     

Multirecipient Encryption Schemes: How to Save on Bandwidth and Computation Without Sacrificing Security

This paper proposes several new schemes which allow a sender to send encrypted messages to multiple recipients more efficiently (in terms of bandwidth and computation) than by using a standard encryption scheme. Most of the proposed schemes explore a new natural technique called randomness reuse. In order to analyze security of our constructions, we introduce a new notion of multirecipient encryption schemes (MRESs) and provide definitions of security for them. We finally show a way to avoid ad hoc analyses by providing a general test that can be applied to a standard encryption scheme to determine whether the associated randomness reusing MRES is secure. The results and applications cover both asymmetric and symmetric encryption.     

Preparation and photoluminescent analysis of Sm3+ complexes based on unsymmetrical conjugated chromophoric ligand

Journal of Materials Science: Materials in Electronics - The octa-coordinated complexes of Sm(III) with β-diketone and nitrogen-heterocyclic bidentate auxiliary moiety were prepared and...     

Optimal linear representations of images for object recognition

Although linear representations are frequently used in image analysis, their performances are seldom optimal in specific applications. This paper proposes a stochastic gradient algorithm for finding optimal linear representations of images for use in appearance-based object recognition. Using the nearest neighbor classifier, a recognition performance function is specified and linear representations that maximize this performance are sought. For solving this optimization problem on a Grassmann manifold, a stochastic gradient algorithm utilizing intrinsic flows is introduced. Several experimental results are presented to demonstrate this algorithm.     

Design and Fabrication of Fiber-Optic Nanoprobes for Optical Sensing

This paper describes the design and fabrication of fiber-optic nanoprobes developed for optical detection in single living cells. It is critical to fabricate probes with well-controlled nanoapertures for optimized spatial resolution and optical transmission. The detection sensitivity of fiber-optic nanoprobe depends mainly on the extremely small excitation volume that is determined by the aperture sizes and penetration depths. We investigate the angle dependence of the aperture in shadow evaporation of the metal coating onto the tip wall. It was found that nanoaperture diameters of approximately 50 nm can be achieved using a 25° tilt angle. On the other hand, the aperture size is sensitive to the subtle change of the metal evaporation angle and could be blocked by irregular metal grains. Through focused ion beam (FIB) milling, optical nanoprobes with well-defined aperture size as small as 200 nm can be obtained. Finally, we illustrate the use of the nanoprobes by detecting a fluorescent species, benzo[a]pyrene tetrol (BPT), in single living cells. A quantitative estimation of the numbers of BPT molecules detected using fiber-optic nanoprobes for BPT solutions shows that the limit of detection was approximately 100 molecules.     

Reduced order modelling and predictive control of multivariable nonlinear process

In this paper, an efficient model-predictive control strategy that can be applied to complex multivariable process is presented. A reduced order generalized predictive algorithm is proposed for online applications with reduction in complexity and time elapsed. The complex multivariable process considered in this work is a binary distillation column. The reduced order model is developed with a recently proposed hybrid algorithm known as Clustering Dominant Pole Algorithm and is able to compute the full set of dominant poles and their cluster centre efficiently. The controller calculates the optimal control action based on the future reference signals, current state and constraints on manipulated and controlled variables for a high-order dynamic simulated model of nonlinear multivariable binary distillation column process. The predictive control algorithm uses controlled auto-regressive integrated moving average model. The performance of constraint generalized predictive control scheme is found to be superior to that of the conventional PID controller in terms of overshoot, settling time and performance indices, mainly ISE, IAE and MSE.     

Fabrication of poly (vinyl alcohol)/ovalbumin/cellulose nanocrystals/nanohydroxyapatite based biocomposite scaffolds

Biocomposite scaffolds composed of PVA, ovalbumin, cellulose nanocrystals, and nanohydroxyapatite were fabricated by freeze-drying method. The results revealed that the different fractions of nanohydroxyapatite and cellulose nanocrystals provide the mechanical strength and stiffness to the desired biocomposite scaffolds. In vitro biomineralization showed the formation of apatite onto the surface of obtained biocomposite scaffolds and increased as amount of nanohydroxyapatite increased. The obtained results suggest that the different combinations of these four biomaterials can be used to fabricate highly porous scaffolds with desired mechanical performance and degradation rate by adjusting ratio for potential use in low load-bearing applications.     

Heuristics made easy: An effort-reduction framework.

In this article, the authors propose a new framework for understanding and studying heuristics. The authors posit that heuristics primarily serve the purpose of reducing the effort associated with a task. As such, the authors propose that heuristics can be classified according to a small set of effort-reduction principles. The authors use this framework to build upon current models of heuristics, examine existing heuristics in terms of effort-reduction, and outline how current research methods can be used to extend this effort-reduction framework. This framework reduces the redundancy in the field and helps to explicate the domain-general principles underlying heuristics. (PsycINFO Database Record (c) 2010 APA, all rights reserved)