Studies of the polymerization of methacrylic acid via free-radical retrograde precipitation polymerization process

In this paper, we present some new results of our work in a novel polymerization process (called the free-radical retrograde precipitation polymerization, or FRRPP, process) that occurs at temperatures above the lower critical solution temperature. Our polymerization experiments basically involve the methacrylic acid–poly(methacrylic acid)–water system. Experimental results indicate a gradual increase in conversion with time after what seemingly is the onset of phase separation. In an equivalent solution polymerization system, conversion of methacrylic acid reaches almost 100% at a much shorter time than in the FRRPP system. Molecular weights of poly(methacrylic acid) at different times for the FRRPP system are not dramatically different from those obtained in the solution system. However, the FRRPP system yields a relatively narrow molecular weight distribution at a wide range of conversion compared to that obtained in the equivalent solution system. The unique characteristics of the FRRPP process is shown in the asymptotic time behavior of the free-radical concentration compared to the decay behavior in other polymerization systems. © 1996 John Wiley & Sons, Inc.     

Simulation of population balance model-based particulate processes via parallel and distributed computing

Population Balance Models (PBMs), a class of integro partial differential equations, are utilized for simulating dynamics of numerous particulate systems. PBMs describe the time evolutions and distributions of many particulate processes and their efficient and quick simulation are critical for enhanced process control and optimization, especially for real-time applications. However, their intensive computational resource requirement is largely a prohibitive factor in the utility of PBMs for control and optimization. This paper describes how distributed computing systems may be leveraged to execute PBM-based simulations thus achieving time savings, using MATLAB's Distributed Computing Toolbox. A parallel computing algorithm was developed for a three dimensional and four dimensional population balance model with built-in constructs such as SPMD that ran efficiently on a cluster of two quad-core machines linked via a gigabit ethernet cable. Speedup of 6.2 and 5.7 times were achieved with 8 workers, over an un-parallelized code, for a 3 and 4 dimensional PBM respectively. Evaluations on work efficiency and scalability further affirm the algorithms’ respectable performance on larger clusters despite significant memory transfer overheads.     

Structural studies of silicon oxynitride layers formed by low energy ion implantation

Silicon oxynitride (Si_xO_yN_z) layers were synthesized by implanting ¹⁶O₂⁺ and ¹⁴N₂⁺ 30 keV ions in 1:1 ratio with fluences ranging from 5 × 10¹⁶ to 1 × 10¹⁸ ions cm⁻² into single crystal silicon at room temperature. Rapid thermal annealing (RTA) of the samples was carried out at different temperatures in nitrogen ambient for 5 min. The FTIR studies show that the structures of ion-beam synthesized oxynitride layers are strongly dependent on total ion-fluence and annealing temperature. It is found that the structures formed at lower ion fluences (∼1 × 10¹⁷ ions cm⁻²) are homogenous oxygen-rich silicon oxynitride. However, at higher fluence levels (∼1 × 10¹⁸ ions cm⁻²) formation of homogenous nitrogen rich silicon oxynitride is observed due to ion-beam induced surface sputtering effects. The Micro-Raman studies on 1173 K annealed samples show formation of partially amorphous oxygen and nitrogen rich silicon oxynitride structures with crystalline silicon beneath it for lower and higher ion fluences, respectively. The Ellipsometry studies on 1173 K annealed samples show an increase in the thickness of silicon oxynitride layer with increasing ion fluence. The refractive index of the ion-beam synthesized layers is found to be in the range 1.54-1.96.     

Phytic acid and extractable phosphorus of pearl millet flour as affected by natural lactic acid fermentation

Lactic acid fermentation of pearl millet flour decreased its phytic acid content and increased extractable phosphorus. Fermentation at 40 and 50°C for 72 h or longer eliminated phytic acid almost completely; extractable phosphorus was more than doubled. Lower temperatures (20 and 30°C) were less effective. The changes in concentration of phytic acid and extractable phosphorus may be attributed partly to phytase activity inherent in pearl millet flour.     

Mechanical and thermal properties of wood fibers reinforced poly(lactic acid)/thermoplasticized starch composites

Thermoplasticized starch (TPS) filled poly(lactic acid) (PLA) blends are usually found to have low mechanical properties due to poor properties of TPS and inadequate adhesion between the TPS and PLA. The purpose of this study was to investigate the reinforcing effect of wood fibers (WF) on the mechanical properties of TPS/PLA blends. In order to improve the compatibility of wood with TPS/PLA blends, maleic anhydride grafted PLA (MA‐g‐PLA) copolymer was synthesized and used. TPS, TPS/PLA blends, and WF reinforced TPS/PLA composites were prepared by twin‐screw extrusion and injection molded. Scanning electron microscope and crystallinity studies indicated thermoplasticity in starch. WF at two different weight proportions, that is, 20% and 40% with respect to TPS content were taken and MA‐g‐PLA at 10% to the total weight was chosen to study the effect on mechanical properties. At 20% WF and 10% MA‐g‐PLA, the tensile strength exhibited 86% improvement and flexural strength exhibited about 106% improvement over TPS/PLA blends. Increasing WF content to 40% further enhanced tensile strength by 128% and flexural strength by 180% with respect to TPS/PLA blends. Thermal behavior of blends and composites was analyzed using dynamic mechanical analysis and thermogravimetric analysis. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46118.     

Effect of particle size of magnesium silicate filler on physical properties of paper

Fillers are essential component of printing papers to increase the opacity, brightness, and to improve formation and printing properties. As a very little work has been reported so far on magnesium silicate (talc), the study was conducted with the filler of different particle size for papermaking. The sheets were made in the laboratory with refined mixed hardwood chemical pulp with five grades of talc, ground calcium carbonate (GCC) and precipitated calcium carbonate (PCC) fillers with 15–24% ash level. Apparent density along with tensile, burst, tear index, Z‐direction tensile strength (ZDTS) and bending stiffness index were evaluated for talc filled sheets, and compared with GCC and PCC. Physical strength properties of talc filled sheets were decreased at a faster rate on increasing filler loading in paper and decreasing the particle size of the filler. With same type of filler its particle size determines the physical properties of paper. The postulate was not found to be valid for all the three varieties of fillers viz., talc, PCC and GCC. Shape and geometry of the PCC and GCC fillers determine the individual property. © 2012 Canadian Society for Chemical Engineering     

Structural,vibrational, optical,magnetic and dielectric properties of Bi1−xBaxFeO3 nanoparticles

Bi_1−xBa_xFeO₃ (x=0.05, 0.10 and 0.15) nanoparticles were synthesized by the sol–gel method. X-ray diffraction and Raman spectroscopy results showed the presence of distorted rhombohedral structure of Bi_1−xBa_xFeO₃ nanoparticles. Rietveld refinement and Williamson–Hall plot of the x-ray diffraction patterns showed the increase in lattice parameters, unit cell volume and the particle size. Infrared spectroscopy and Raman analysis revealed the shifting of phonon modes towards the higher wavenumber side with increasing Ba concentration. These samples exhibited the optical band gap in the visible region (2.47–2.02 eV) indicating their ability to absorb visible light. Magnetic measurement showed room temperature ferromagnetic behavior, which may be attributed to the antiferromagnetic core and the ferromagnetic surface of the nanoparticles, together with the structural distortion caused by Ba substitution. The magnetoelectric coupling was evidenced by the observation of the dielectric anomaly in the dielectric constant and the dielectric loss near antiferromagnetic Neel temperature in all the samples.     

Effect of activated crumb rubber on the properties of crumb rubber‐modified bitumen

Bitumen modification was made with the activated crumb rubber concentrate and its efficacy was examined in terms of its consistency and rheological properties. It was found that softening point of the activated crumb rubber‐modified bitumen increased while its penetration and elastic recovery decreased compared with the nonactivated crumb rubber system. Based on contact angle results, the activated crumb rubber–bitumen system was found to be more wettable and exhibited better adhesion to the substrate than those of other systems. The shifting of glass transition temperature towards higher temperature and the occurrence of inter‐mix phases in the activated crumb rubber–bitumen system supported its superior temperature resistance. The difference in viscosity obtained between the activated and nonactivated crumb rubber systems is attributed to the high swelling of activated crumb rubber and its soluble fractions in the bitumen as viewed in scanning electron images. High complex modulus and low phase angle of the activated crumb rubber system over the entire range of temperatures indicated its reduced temperature susceptibility and more elasticity. The activated crumb rubber–bitumen system meets the requirements of commercial standard specification. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Solar/visible light photocatalytic dye degradation using BaTi1−xFexO3 ceramics

BaTi_1−xFe_xO₃ compositions (for x = 0, 0.1, and 0.2) were prepared via a solid-state reaction route. The presence of iron (Fe) in barium titanate (BaTiO₃) eventually decreased the energy bandgap; thus, its utilization for water cleaning application through photocatalysis process was explored (using methylene blue [MB] dye as an indicative pollutant in water). Characterization of the synthesized powder was performed through scanning electron microscopy, X-ray diffraction, Raman spectroscopy, and X-ray photoelectron spectroscopy. The bandgap of the synthesized powder was calculated as 3.2, 2.12, and 1.67 eV for BaTi_1−xFe_xO₃ compositions (for x = 0, 0.1, and 0.2), respectively. BaTi_0.8Fe_0.2O₃ powder showed excellent results, and ∼71% of the MB dye (∼5 mg/L concentrated) was degraded using the photocatalysis process under visible light. To check the potentiality of BaTi_1−xFe_xO₃ compositions (for x = 0, 0.1, and 0.2), the photocatalysis process was carried out by changing the concentration of MB dye (2.5–10 mg/L with a step of 2.5 mg/L) and the amount of BaTi_0.8Fe_0.2O₃ powder (0.05–0.2 g with a step of 0.05 g) for ∼5-mg/L concentrated MB dye. The treated water was further used as a growth parameter and phytotoxicity analysis through germination index on the wheat seeds. Lastly, the BaTi_1−xFe_xO₃ compositions (for x = 0, 0.1, and 0.2) were explored for water cleaning applications under real-time solar irradiation.