Application of fluorescence spectroscopy for rapid and noninvasive quality determination of yoghurt ice cream using chemometrics

The aim of this study was to explore the potential of fluorescence spectroscopy to determine the quality of yoghurt ice cream, prepared by adding different concentrations of yoghurt (10, 20, 30, 40, 50%). The addition of 50% of yoghurt showed the lowest pH and meltdown values, whereas the highest acidity and overrun rates were observed at the same concentration. Additionally, fluorescence spectra taken at varied emission and excitation ranges were preprocessed for baseline correction. The partial least square regression analysis on proposed excitation wavelengths (270 nm, 280 nm, 290 nm and 315 nm) showed effective prediction of various quality parameters of yoghurt ice cream.     

ZnO/WO3 nanostructure as an efficient visible light catalyst

Highly photosensitive ZnO/WO₃ photocatalysts were fabricated by wet impregnation of zinc oxide (ZnO) in different contents. Tungsten trioxide (WO₃) was synthesized by hydrothermal route. The presence of ZnO inhibited the crystallization of WO₃ and caused agglomeration of WO₃ nanoparticles surface. The formation of Zn-O-W linkage was studied by X-ray photoelectron emission (XPS) and Fourier transforms Infra-red spectra (FTIR). These linkages were responsible for red shift of absorption peak of composites as compared to individual ZnO and WO₃. The band gap was decreased due to incorporation of ZnO in WO₃ which promoted the separation of photo-generated carriers. As a result, ZnO/WO₃ composite showed extremely high efficiency for MO degradation in comparison with Degussa P25, pure ZnO and WO₃. 2.0% ZnO/WO₃ composite displayed the highest activity in photocatalytic decomposition of methyl orange (MO) dye.     

Interferences in electron emission from O2 by 30 MeV O impact

Interference structures in the ejected electron spectra for 30 MeV O^5,8+ + O₂ are investigated. The measured electron yields were studied for electron energies from 5 to 400 eV and observation angles of 30°, 60°, 90°, 120° and 150° with respect to the incident beam direction. Experimental molecular cross-sections were normalized to theoretical molecular one-center cross-sections revealing oscillatory structures suggestive of secondary interferences as evidenced by the independence on the observation angle. An oscillation interval for 30 MeV O^5,8+ + O₂ of Δk ∼ 4 a.u. is found, a value two times larger than that previously observed for 3 MeV H⁺ + N₂. No obvious evidence for primary Young-type interferences was seen.     

Scanning Electron Microscopy (SEM) and Light Microscopy (LM)‐based Palyno‐morphological views of Solanaceae in Western Himalaya

In this study, plants belonging to family Solanaceae growing in Western Himalaya region have been observed palynologically under Light Microscope and Scanning electron microscope. Present investigation comprises of 10 genera and 23 species, namely, Atropa acuminata, Capsicum decoraticus, Capsicum frutescens, Cestrum aurantiacum, Cestrum diurnum, Cestrum nocturnum, Datura alba, Datura innoxia, Datura stramonium, Hyoscymus niger, Lycopersicon esculentum, Nicotiana rustica, Nicotiana tabacum, Petunia alba, Petunia hybrida, Solanum erianthum, Solanum melongena, Solanum miniatum, Solanum pseudocapsicum, Solanum surratense, Solanum tuberosum, Withania coagulans, Withania somnifera. Solanaceae is a eurypalynous family. Grains are usually Tricolporate and Tetracolporate, radially symmetrical, isopolar, prolate‐spheroidal to oblate‐spheroidal to oblate‐spheroidal to subprolate to per prolate or suboblate to oblate, size range: 8.55–72 μm, amb circular, semi‐angular or subangular, aperture drop‐type, labrum common‐type, exine usually 2 μm thick, nexine 1–1.5 μm thick. Tectum usually psilate, sexine reticulate, granulate or striato‐reticulate, with obscure pattern, sexine 1–2 μm thick, nexine 1–1.5 μm thick, and intine 0.5–1 μm thick. Most striking variation has been found in the shape class, aperture‐type, and tectal surface. Based on these characters, taxonomic keys have been made for correct identification of members in Solanaceae. However, the grains of this family are usually tricolporate and have direct relationship with certain members of the family Scrophulariaceae. Palyno‐morphological characters of family Solanaceae have been studied for the first time in Western Himalayan region of Pakistan. These palyno‐morphological characters are significant for identification of the members of family Solanaceae.     

Comparative light and scanning electron microscopy in authentication of adulterated traded medicinal plants

The medicinal plants are utilized globally considering the cheap and chemical free source, but their correct identification and authentication is prerequisite for safety and efficacy of plant‐based medicines. The present study encompassed traded medicinal plants (16) with high therapeutic value from diverse families like Brassicaceae, Berberidaceae, Malvaceae, Salicaceae, Myrtaceae, Papilionaceae, Ascelpiadaceae, Colchicaceae, Violaceae, and Vitaceae for detailed microscopic study of characters that is, morphology, pollen shape and sizes, P/E ratio, pore length and width, spine length, colpi dimensions, and exine sculpture pattern. The plants showed noteworthy differences in microscopy of Wattakaka volubilis having pollinia, translator and corpusculum like structures while pores were visible in Colchicum luteum, Alcea rosea, and Hibiscus syriacus. The spines were observed in Centipeda minima, A. rosea, and H. syriacus being dimorphic spines in A. rosea and monomorphic in H. syriacus. The exine sculpturing pattern was reticulate in mostly studied plants however distinctive exine pattern was noted in Berberis aristata and Berberis lyceum. The highest polar diameter, equatorial diameter and exine thickness among studied plants were observed in H. syriacus (161 μm), C. luteum (50 μm) and Vitis jacquemontii (1.10), respectively. Thus, microscopy of medicinal plants in addition to other taxonomic evidence offers a supportive skill in authentication, consequently utilization by local consumers and pharmaceutical industries.     

Morpho-palynological investigation of gymnospermal flora from subalpine and alpine zones of northern Pakistan using LM and SEM

The pollen morphology, with special reference to exine sculpture, of some species of the gymnosperms was assessed for the first time from the subalpine and alpine zones of western Himalayas northern Pakistan. The pollen of all these species is airborne and allergenic, so pollen morphology helps for identification of this allergenic pollen at specific level. Different morpho-palynological characteristics were analyzed including size range of pollen, polar and equatorial diameter ratio, exine ornamentation, sculpturing, exine thickness, pollen type, and shape. For accurate and quick identification of species, taxonomic key was made based on different morpho-palynological characteristics. The quantitative data were processed using SPSS software. Gymnospermal pollen includes inaperturate, rarely 1-colpate observed in (Cupressaceae), hexazonocolpate in (Ephedraceae), vesiculate, bissacate in (Pinaceae), and inaperturate in (Taxaceae). Different pollen shapes observed were prolate (4 spp), sub-spheroidal (7 spp), and oblate (1 spp). Variation was observed in exine sculpturing granular (4 spp), reticulate (1 spp), areolate-punctate (3 spp), and psilate (2 spp). This is based on the analysis of 10 plants belonging to four families of gymnosperms. Distinct pollen shape has emerged as the most diagnostic feature to separate some genera such as spheroidal in (Cupressaceae, Taxaceae), prolate and radiosymmetrical in (Ephedraceae), and bilateral in (Pinaceae). Exine thickness and sculpturing proved to be helpful at generic and specific levels. The results reinforced the significance of gymnospermal pollen morphological features which were used as aid for valuable taxonomic tool in plant systematics.     

Miniaturized humidity and temperature sensing RFID enabled tags

A compact 27‐bit linearly polarized chipless radio frequency identification tag is presented in this research. The proposed tag is designed with an overall tag dimension of 23 × 23 mm². The tag comprises of metallic (copper) rings‐based structure loaded with slots. These slots correspond to a particular sequence of bits. The circular tag is analysed using 2 different substrates, that is, Rogers RT/duroid/5870 and flexible Rogers RT/duroid/5880. The radar cross‐section response of frequency signatured tag is analysed for humidity and temperature sensor designs. Humidity sensing is achieved by deploying a DuPont Kapton HN heat resistant sheet on the shortest slot of the tag, that is, the sensing slot. Temperature sensing is attained using Rogers RT/duroid/5870 and Stanyl polyamide as a combined substrate. Hence, the miniaturized, robust, and flexible tag can be deployed over irregular surfaces for sensing purposes.     

Performance Evaluation of AOMDV on Realistic and Efficient VANet Simulations

Wireless Personal Communications - The digital transmission amongst vehicles and roadway equipment is necessary for the realization of smart transportation systems. Vehicular ad-hoc network (VANet)...     

On Computer Implementation for Comparison of Inverse Numerical Schemes for Non-Linear Equations

In this research article, we interrogate two new modifications in inverse Weierstrass iterative method for estimating all roots of non-linear equation simultaneously. These modifications enables us to accelerate the convergence order of inverse Weierstrass method from 2 to 3. Convergence analysis proves that the orders of convergence of the two newly constructed inverse methods are 3. Using computer algebra system Mathematica, we find the lower bound of the convergence order and verify it theoretically. Dynamical planes of the inverse simultaneous methods and classical iterative methods are generated using MATLAB (R2011b), to present the global convergence properties of inverse simultaneous iterative methods as compared to classical methods. Some non-linear models are taken from Physics, Chemistry and engineering to demonstrate the performance and efficiency of the newly constructed methods. Computational CPU time, and residual graphs of the methods are provided to present the dominance behavior of our newly constructed methods as compared to existing inverse and classical simultaneous iterative methods in the literature.