Attacks and Defenses for JTAG

Editor's note:JTAG is a well-known standard mechanism for in-field test. Although it provides high controllability and observability, it also poses great security challenges. This article analyzes various attacks and proposes protection schemes.—Mohammad Tehranipoor, University of Connecticut     

Fed batch enzymatic saccharification of newspaper cellulosics improves the sugar content in the hydrolysates and eventually the ethanol fermentation by Saccharomyces cerevisiae

The newspaper is comprised of (w w^?1) holocellulose (70.0%) with substantial amount of lignin (16.0%). Bioconversion of the carbohydrate component of newspaper to sugars by enzymatic saccharification, and its fermentation to ethanol was investigated. Of various enzymatic treatments using cellulase, xylanase and laccase, cellulase enzyme system was found to deink the newspaper most efficiently. The saccharification of deinked paper pulp using enzyme cocktail containing exoglucanase (20 U g^?1), β-glucosidase (60 U g^?1) and xylanase (80 U g^?1) resulted in 59.8% saccharification. Among additives, 1% (v v^?1) Tween 80 and 10 mol m^?3 CoCl₂ improved the enzymatic hydrolysis of newspaper maximally, releasing 14.64 g L^?1 sugars. The fed batch enzymatic saccharification of the newspaper increased the sugar concentration in hydrolysate from 14.64 g L^?1 to 38.21 g L^?1. Moreover, the batch and fed batch enzymatic hydrolysates when fermented with Saccharomyces cerevisiae produced 5.64 g L^?1 and 14.77 g L^?1 ethanol, respectively.     

Temperature-induced control over phase selection among hydroxides of nickel

While at low (4°C) temperatures, addition of ammonia to aqueous metal nitrate solutions induces the precipitation of α-nickel hydroxide and at high (25–65°C) temperatures, β-Ni(OH)₂ is formed. The crystallinity of the product improves at higher temperatures of precipitation and the product obtained at 65°C is devoid of various disorders such as stacking faults, turbostraticity and interstratification. This provides a simple and efficient alternative to the hydrothermal synthesis of crystalline β-Ni(OH)₂. The temperature induced control over phase selection provides direct experimental evidence for the metastability of α-nickel hydroxide. Crystalline β-Ni(OH)₂ is, however, a poor electrode material for alkaline secondary cells and exhibits a capacity of only 75 ± 10 mAh/g, against the theoretically expected 289 mAh/g.     

The internal migration of Indian scientists, 1981–2003, from an analysis of surnames

Although many Indian surnames are common across the whole country, some are specifically associated with just one or a few of the 35 states and union territories that comprise India today. For example, Reddy comes from Andhra Pradesh and Das, Ghosh and Roy from West Bengal. We investigated the extent to which researchers with names associated with some of the larger states were writing scientific papers in those states, and in other ones, and to see how these concentrations (relative to the whole of India) had changed since the early 1980s. We found that West Bengalis, for example, were now significantly less concentrated in their home state than formerly, and that their concentrations elsewhere were strongly influenced by the state’s geographical distance from West Bengal and, to a lesser extent, by the correlation between the scientific profile of their host state and their own preferences (which favoured physics and engineering over biology and mathematics). Thus they were strongly represented in nearby Bihar, Assam and Orissa, and much less so in Tamil Nadu and Kerala.     

Electrochemical evaluation of the synergistic effect of molybdate tungstate inhibitor mixtures in chloride ion medium and effect of Cl− ion on inhibition efficiency of molybdate

It is well known to corrosion community about chromates and nitrates which are widely used as corrosion inhibitors. However, it is also well known that these inhibitors are oxidizing inhibitors of which chromates are carcinogenic also. Therefore, use of non toxic inhibitors such as molybdate and tungstate are gaining importance. AC impedance analysis of mild steel panels exposed to 3% NaCl containing 6000 ppm molybdate, 5000 ppm molybdate + 1000 ppm tungstate, 3000 ppm molybdate + 3000 ppm tungstate, 1000 ppm molybdate + 5000 ppm tungstate, 6000 ppm tungstate were evaluated. The impedance studies were carried out for different durations viz. 1 hour, 1 day and 7 days. From impedance analysis, it is clear that molybdate and tungstate are not forming any promising synergistic mixtures. The effect of chloride ion concentration viz. 0.01M, 0.05M, 0.1M, 0.3M and 0.6M on inhibition efficiency of molybdate has been discussed. Addition of small amount of tungstate along with molybdate enhances long term film stability on mild steel. It has been found that the inhibition effect is decreasing with increase in concentration up to 0.1M and on further increase in concentration viz. 0.3M and 0.6M, an increase in inhibition efficiency was observed. It has been found that deaeration negatively affected the film properties and did not form a stable film. The corrosion products formed were analyzed using Mössbauer spectroscopy and FT-IR spectroscopy, which showed the presence of oxyhydroxides.     

Antioxidant formation by γ-irradiation of glucose–amino acid model systems

The efficacy of γ-irradiation for the formation of Maillard reaction products (MRPs) from glucose and lysine/glycine and the antioxidant potential of MRPs thus formed were examined. Formation of MRPs was observed by monitoring absorbance at 284 nm and 420 nm. Upon irradiation, there was a dose-dependent increase in absorbance (r² = 0.99) at both the wavelengths. Irradiation of glucose/lysine solution resulted in higher absorbance at 284 nm than did that of glucose/glycine solution. Similarly, increase in absorbance at 420 nm was observed upon irradiation in both the systems. No significant absorbance was observed with unirradiated solution of glucose and lysine/glycine. These findings thus clearly revealed the formation of intermediate products and brown complexes (of Maillard reaction) upon irradiation of glucose/amino acid solution. A fluorescence was also observed in irradiated glucose/amino acid solution, whereas, none was seen in non-irradiated solution. These observations further confirmed the formation of MRPs, as fluorescent compounds are known to be precursors of brown pigments formed during the Maillard reaction. These MRPs exhibited excellent antioxidant activity, as measured by 1,1-diphenyl-2-picrylhydrazyl (DPPH) and β-carotene bleaching assays. MRPs, formed at a 40 kGy dose, scavenged up to 62% of DPPH radical and 82% of β-carotene was protected from bleaching. Reducing power of MRPs, estimated using the ferricyanide, method was also increased as compared to non-irradiated solutions. Further, these MRPs were able to scavenge hydroxyl radical and superoxide anion radical to the extents of 33% and 58%, respectively. These MRPs could chelate iron to an extent of 32% under in vitro conditions. Thus, these studies clearly demonstrated that radiation technology could be employed for obtaining novel antioxidants from sugar and amino acid combinations.     

Thermal and electronic properties of Bi1 − xSbx alloys

Polycrystalline Bi_1 ? xSb_x (x = 0.10, 0.12 and 0.15) semiconducting alloys were synthesized by mechanical alloying in order to achieve homogeneous thermoelectric materials with improved mechanical strength. The homogeneity of the powder samples were repeatedly checked by X-ray diffraction and scanning electron microscopy to standardize the milling conditions. The best possible homogenized material was developed with the milling conditions of BPR 30:1, ball diameter 30 mm, 400 rpm and milling time of 15 h. The electrical resistivity, thermoelectric power and thermal conductivity were measured in the temperature range 300–500 K. It was found through these experiments that the composition with x = 0.12 behaved in a normal semiconducting way, whereas the other two compositions (x = 0.10 and 0.15) showed degenerate semiconductor behaviour. These features have been qualitatively explained from the band structure and interband scattering mechanisms.     

Single phase power factor correction — A review

This paper provides a comprehensive review of the past and recent developments in the area of single-phase power factor correction (PFC) techniques. The motivation for the research in this area, and the manifold directions into which the research has gained impetus, are clearly brought out. The various PFC techniques are broadly classified into (1) passive, (2) active, and (3) active-passive PFC techniques. The active PFC techniques, based on the output dynamics, are further classified into (1) conventional techniques which have slow output dynamics and (2) techniques with fast output dynamics. The critical issues within each PFC technique are discussed in detail. An extensive list of references is also provided at the end.