Sulfur removal of gas oil using ultrasound-assisted catalytic oxidative process and study of its optimum conditions

Ultrasound-assisted oxidative desulfurization process (UAOD) was applied to reduce sulfur compounds of gas oil containing various types of sulfur content. The environmental regulation requires a very deep desulfurization to eliminate the sulfur compounds. UAOD is a promising technology with lower operating cost and higher safety and environmental protection. For the first time the typical phase transfer agent (tetraoctyl-ammonium-bromide) was replaced with isobutanol because using isobutanol is much more economical than TOAB, imposing no contamination. The reaction was carried out at optimal point with various temperatures, in single-, two- and three step-procedures, investigating the effect of gradual increase of H₂O₂ and TOAB being used instead of isobutanol. Total sulfur concentration in oil phase was analyzed by ASTM-D3120 method. The highest removal of about 90% for gas oil containing 9,500 mg/kg of sulfur was achieved in three-steps during 17 minutes of process at 62±2 °C when 180.3 mmol of H₂O₂ was used and extraction carried out by methanol.     

A Review on the Role of miR-149-5p in the Carcinogenesis

miR-149 is an miRNA with essential roles in carcinogenesis. This miRNA is encoded by the MIR149 gene on 2q37.3. The miR-149 hairpin produces miR-149-5p and miR-149-3p, which are the “guide” and the sister “passenger” strands, respectively. Deep sequencing experiments have shown higher prevalence of miR-149-5p compared with miR-149-3p. Notably, both oncogenic and tumor suppressive roles have been reported for miR-149-5p. In this review, we summarize the impact of miR-149-5p in the tumorigenesis and elaborate mechanisms of its involvement in this process in a variety of neoplastic conditions based on three lines of evidence, i.e., in vitro, in vivo and clinical settings.     

The effect of substrate surface integrity on the surface properties of TiCrN coating applied via the CAE-PVD method

This study aims to investigate how the predeposition machining processes such as magnetic grinding, turning machining, and wire electrical discharge machining can influence the surface properties including electrochemical and tribological behavior of TiCrN nanostructured coating applied on Mo40 steel substrate. A physical vapor deposition technique using cathodic arc evaporation was used to apply the coating. The crystallographic phases and the microstructure of the coating were studied by X-ray diffraction and scanning electron microscope, respectively. Rockwell-C, electrochemical impedance spectroscopy and potentiodynamic polarization, and pin-on-disk wear tests were employed to evaluate the adhesion strength, corrosion behavior, and tribological property of specimens, respectively. The electrochemical results after 24 h of exposure to 3.5 wt% NaCl solution showed that TiCrN coating pretreated with a turning process with polarization resistance of about 3525.32 Ω.cm² had the best corrosion resistance among all specimens. This was because of the improvement of the smoothness, surface quality, and adhesion after the turning process. On the other, the friction coefficient of the grounded sample is less than that of other ones. This is probably due to its higher adhesion strength and higher surface smoothness.     

Hesperidin Promotes Osteogenesis and Modulates Collagen Matrix Organization and Mineralization In Vitro and In Vivo

This study evaluated the direct effect of a phytochemical, hesperidin, on pre-osteoblast cell function as well as osteogenesis and collagen matrix quality, as there is little known about hesperidin’s influence in mineralized tissue formation and regeneration. Hesperidin was added to a culture of MC3T3-E1 cells at various concentrations. Cell proliferation, viability, osteogenic gene expression and deposited collagen matrix analyses were performed. Treatment with hesperidin showed significant upregulation of osteogenic markers, particularly with lower doses. Mature and compact collagen fibrils in hesperidin-treated cultures were observed by picrosirius red staining (PSR), although a thinner matrix layer was present for the higher dose of hesperidin compared to osteogenic media alone. Fourier-transform infrared spectroscopy indicated a better mineral-to-matrix ratio and matrix distribution in cultures exposed to hesperidin and confirmed less collagen deposited with the 100-µM dose of hesperidin. In vivo, hesperidin combined with a suboptimal dose of bone morphogenetic protein 2 (BMP2) (dose unable to promote healing of a rat mandible critical-sized bone defect) in a collagenous scaffold promoted a well-controlled (not ectopic) pattern of bone formation as compared to a large dose of BMP2 (previously defined as optimal in healing the critical-sized defect, although of ectopic nature). PSR staining of newly formed bone demonstrated that hesperidin can promote maturation of bone organic matrix. Our findings show, for the first time, that hesperidin has a modulatory role in mineralized tissue formation via not only osteoblast cell differentiation but also matrix organization and matrix-to-mineral ratio and could be a potential adjunct in regenerative bone therapies.     

Photo isomerization of cis-cyclooctene to trans-cyclooctene: Integration of a micro-flow reactor and separation by specific adsorption

Liquid-phase adsorption has hardly been established in micro-flow, although this constitutes an industrially vital method for product separation. A micro-flow UV-photo isomerization process converts cis-cyclooctene partly into trans-cyclooctene, leaving an isomeric mixture. Trans-cyclooctene adsorption and thus separation was achieved in a fixed-bed micro-flow reactor, packed with AgNO₃/SiO₂ powder, while the cis-isomer stays in the flow. The closed-loop recycling-flow has been presented as systemic approach to enrich the trans-cyclooctene from its cis-isomer. In-flow adsorption in recycling-mode has hardly been reported so that a full theoretical study has been conducted. This insight is used to evaluate three process design options to reach an optimum yield of trans-cyclooctene. These differ firstly in the variation of the individual residence times in the reactor and separator, the additional process option of refreshing the adsorption column under use, and the periodicity of the recycle flow.     

Carbon nanotubes growth on sub-surface catalyst layer of Cu–Ni nanoparticles thin film

Cu–Ni nanoparticles (NPs) thin films were prepared by Direct Current (DC) magnetron sputtering with Cu and Ni targets. The products were used as catalysts for Thermal CVD (TCVD) growing of carbon nanotubes (CNTs) from acetylene gas at 825°C. In order to characterize the nano catalysts, X-ray Diffraction (XRD) and Atomic Force Microscopy (AFM) and to study the synthesized CNTs Scanning Electron Microscopy (SEM) and Raman Spectroscopy were applied. A remarkable CNT grown on the sub-surface of catalyst layer compared to its top is deduced from SEM images. Despite the poor catalytic activity of the top-surface, these considerations led us to conclude more catalytic activity of the sub-surface.     

Mesoporous SBA-15@n-Pr-THAM-ZrO organic–inorganic hybrid: as a highly efficient reusable nanocatalyst for the synthesis of polyhydroquinolines and 2,3-dihydroquinazolin-4 (1h)-ones

Journal of Porous Materials - In this work, tris(hydroxymethyl)aminomethane-Zirconium complex supported on modified SBA-15 (SBA-15@n-Pr-THMAM-ZrO) prepared as a novel mesoporous catalyst. The...     

Amine corrosion and amine cracking of API 5L X52 carbon steel in the presence of hydrogen sulphide and carbon dioxide

In this research, stress corrosion cracking (SCC) and corrosion behaviour of API 5L X52 carbon steel in 25?wt-% diethanolamine solution, saturated/unsaturated with carbon dioxide and containing 0 and 200?ppm hydrogen sulphide at different temperatures were investigated using slow strain rate test, electrochemical measurement and microscopic analysis. In addition, the presence of heat stable amine salts (HSASs) in the test solution was studied using spectrophotometry and Fourier transform infra-red spectroscopy. Analysis of the results showed that the primary components to form HSASs exist in the solution. The results indicated that SCC is more likely in solutions without amine. Increase in corrosion rate of carbon steel by increase in temperature was clearly observed and concluded that the simultaneous presence of hydrogen sulphide and carbon dioxide in the solution can increase the corrosion rate of carbon steel more than having one of the gases in the solution.     

Reliable in the long run? Petroleum policy and long-term oil supplier reliability

Accelerating oil import dependence in energy consuming nations highlights the importance of having energy supplies at sufficient levels and at stable and reasonable prices. Consequently, it is crucial that oil exporters realize their full production potential. Current debates on energy security are often focused on short-term risks e.g. sudden disruptions due to wars, domestic instability, etc. However, when it comes to assessing oil supplier reliability it is equally important to assess their longer term ability and willingness to deliver oil to the global market. This study analyzes the effects of petroleum investment policies on crude oil production trends in 14 major oil producing countries (2000–2010) by focusing on the political–institutional frameworks that shape the investment conditions for the upstream oil sector. Our findings indicate that countries with less favorable oil sector frameworks systematically performed worse than countries with investor friendly and privatized sectors. The findings indicate that assessments based on remaining reserves and planned production capacities alone could inflate expectations about future oil supplies in a world where remaining crude reserves are located in countries with unfavorable investment frameworks.     

Analysis of fair rate calculations in resilient packet ring aggressive mode

Resilient packet ring (RPR) standardized as IEEE 802.17 is a new medium access control (MAC) protocol for metro-ring networks. RPR supports spatial reuse which increases the achieved throughput but it can also result in congestion and starvation of nodes on the ring. Therefore, it is necessary to employ mechanisms to enforce a fair allocation of the ring bandwidth in RPR. In order to maintain fairness among nodes, a fairness algorithm is deployed at each RPR node. When a node detects congestion, it calculates a fair rate which is advertised to all upstream nodes contributing to congestion. Upon receiving the fair rate, the upstream nodes limit the rate of their injected traffic to the advertised fair rate. Consequently, the congested node can utilize the unused capacity and add its local traffic to the ring. In this paper, we develop an analytical model for fair rate calculation in the RPR aggressive mode fairness algorithm in the parking-lot scenario. This model provides an insight on dynamics of the RPR fairness algorithm and can be used to evaluate its performance. We investigate this problem in two cases. First, we assume that the link propagation delay is zero and derive the fair rate equations for this ideal case. We then consider the link propagation delay and develop a more realistic model. We verify the accuracy of our model by simulation results. Furthermore, we use the developed model to study the impact of various parameters on convergence of the fair rate.