Effect of Immersion Time on Corrosion Behavior of Single-Phase Alloy and Nanocomposite Bismuth Telluride-Based Thermoelectrics in NaCl Solution

The corrosiveness of bismuth telluride-based thermoelectric materials (n-type single-phase alloy and a nanocomposite with MoS₂ nanoinclusions), in 0.1 molar solution of sodium chloride (NaCl), was investigated. The electrochemical impedance spectroscopy curves obtained after 1, 24, 48 and 72 h immersion time revealed the enhancement of the corrosion resistance of the nanocomposite specimen in a 0.1 molar NaCl solution in comparison with the single-phase bismuth telluride-based alloys, and the passivity increased by immersion time up to 72 h. The nanocomposite sample with submicron grains provided suitable nucleation sites for passive film nucleation that led to higher protective behavior.     

Mixing processes in the cavity transfer mixer: A thorough study

In many industrial applications, the quality of mixing between different materials is fundamental to guarantee the desired properties of products. However, properly modeling and understanding polymer mixing presents noticeable difficulties, because of the variety and complexity of the phenomena involved. This is also the case with the Cavity Transfer Mixer (CTM), an add‐on to be mounted downstream of existing extruders, to improve distributive mixing. The present work proposes a fully three‐dimensional model of the CTM: a finite element solver provides the transient velocity field, which is used in the mapping method implementation to compute the concentration field evolution and quantify mixing. Several simulations are run assessing the impact on mixing of geometrical and functioning parameters. In general, the number of cavities per row should be limited and the cavity size rather big to guarantee good mixing quality. © 2017 American Institute of Chemical Engineers AIChE J, 64: 1034–1048, 2018     

Oxovanadium(IV) salicylidene Schiff base complex anchored on mesoporous silica MCM-41 as hybrid materials: a robust catalyst for the oxidation of sulfides

Oxovanadium(IV) Schiff base complex have been anchored onto the surface of purely siliceous MCM-41 and tested for its activity as catalyst for the oxidation of sulfides. This catalyst could alter this oxidation reaction extremity, exhibiting excellent yields with 100 % selectivity. The intercalation of the complex inside the silica matrix was supported by various characterization techniques like X-ray diffraction, differential thermogravimetric (TG-DTA), BET measurements, UV–Vis diffuse reflectance spectroscopy and Fourier transform infrared spectroscopy (FT-IR). The stability of the catalyst during the course of the reaction was confirmed from its post catalytic FT-IR and XRD analysis. The catalyst could be reused five times without notable loss of its catalytic activity and efficiency which indicates that the metal-Schiff base moiety is intact and the coordination environments are not altered during the reaction.     

CFD Process Modeling of the Industrial Calcination of Diatomite

Calcination of diatomite is an expensive process frequently resulting in products with unpredictable structure. Alternatively, calcination in swirling flow is an energy‐saving option. Computational fluid dynamics modeling of an experimental calcination process unit is presented. Experimental results and systematic collection of process data were used to define boundary condition for steady‐state and transient simulation runs. The comparison of experimental and simulation results shows the complexity of the calcination process. The results can be used for further process optimization.     

Trace element geochemistry of the Obed Mountain deposit coals, Alberta, Canada

This study reports on the elemental concentrations and vertical variation of coal seams from the Obed Mountain deposit, Alberta Foothills, Canada. Results from two sections of Seam 1 show that the major elements (i.e. Al, Fe, Mg, K, Na, Ti, and Si) have high concentrations in intervals having high ash content, with the only exception of Ca. Similarities are apparent, in both sections, in the vertical variations of Th, U, Se, and Zn; Rb, Cs, and K; Sb, Mo, and W; Mn and Sr; and Ba, Cr, Co, Hf, and Sc. These similarities are also evident among the REEs, notably between Ce and La; also between Dy, Eu, and Sm. Most elements, with the exception of Ba and Sr are slightly more concentrated in Section 2 of Seam 1, located approximately 1.5Fig. km away from Section 1. Compared to Seam 1, Seam 2 has lower mean concentrations of elements. Boron in the coal ranges from 27 to 100 ppmw, though most values are less than 50 ppmw. Boron concentrations suggest a freshwater depositional environment. The element is depleted in the sedimentary partings (12–29 ppmw only) and is enriched in the coal interval near the roof and immediately beneath the partings. This enrichment shows possible downward mobilization of boron. Vertical variations of elements are helpful in delineating the boundaries between coal and sedimentary partings in the succession. The Obed Mountain coals are “clean” by world standards and their elemental concentrations are comparable with those in coals of a lower rank from the same coal formation used for power generation in Alberta. All sedimentary partings have low concentrations of Ba, Hf, Sc, Sr, Ta, Th, U, and REEs; this, along with the absence of an Eu negative anomaly suggests a non-volcanic origin for the partings.     

印尼褐煤无黏结剂型煤自燃与燃烧特性研究

在内辊式高压型煤机上将一种印度尼西亚褐煤压制成高强度的无黏结剂型煤,对其比表面积、孔容积和表面官能团进行分析,测定了型煤的相对着火温度和绝热氧化升温速率,研究了其热解和燃烧行为特性.结果表明,印尼褐煤在干燥和高压成型过程中,发生了孔的收缩和崩塌,特别是微孔收缩程度要更大一些;干燥和成型过程中有羟基、羰基和羧基含氧官能团的分解;经过提质处理后,褐煤的自燃着火倾向降低,热解和燃烧反应性降低.     

In situ emulsion polymerization and characterization of PVAc nanocomposites including colloidal silica nanoparticles for wood specimens bonding

Polyvinyl acetate (PVAc) nanocomposites for wood adhesives containing different amounts of colloidal silica nanoparticles (CSNs) were synthesized via in situ one-step emulsion polymerization. The adhesion strength of wood specimens bonded by PVAc nanocomposites was investigated by the tensile test. Thermal properties of PVAc nanocomposites were also characterized by differential scanning calorimetry and thermogravimetric analysis. Rheological and morphological properties of the PVAc nanocomposites were investigated using rheometric mechanical spectrometry and field emission scanning electron microscopy (FESEM), respectively. The obtaining results showed that the shear strength of PVAc nanocomposite including 1 wt. % CSNs has the highest shear and tensile strength about 4.7 and 3.2 MPa, respectively. A small increment of T_g (~3 °C) and considerable increment of the ash content proved the enhancement of PVAc thermal characterization in the presence of CSNs. FESEM results showed uniform dispersion of nanoparticles throughout the PVAc matrix due to using the in situ emulsion polymerization process. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48570.     

Thermodynamic Phase Diagram,Half-Metallic and Optical Properties of the Zr2TiSi [111] Films Based on DFT

Silicon - Thermodynamic stability, electronic and optical properties of the Zr2TiSi compound in the bulk and its [111] films have been investigated, based on the density functional theory (DFT)...