Extension of Collagen Deposition in COVID-19 Post Mortem Lung Samples and Computed Tomography Analysis Findings

Lung fibrosis has specific computed tomography (CT) findings and represents a common finding in advanced COVID-19 pneumonia whose reversibility has been poorly investigated. The aim of this study was to quantify the extension of collagen deposition and aeration in postmortem cryobiopsies of critically ill COVID-19 patients and to describe the correlations with qualitative and quantitative analyses of lung CT. Postmortem transbronchial cryobiopsy samples were obtained, formalin fixed, paraffin embedded and stained with Sirius red to quantify collagen deposition, defining fibrotic samples as those with collagen deposition above 10%. Lung CT images were analyzed qualitatively with a radiographic score and quantitatively with computer-based analysis at the lobe level. Thirty samples from 10 patients with COVID-19 pneumonia deceased during invasive mechanical ventilation were included in this study. The median [interquartile range] percent collagen extension was 6.8% (4.6–16.2%). In fibrotic compared to nonfibrotic samples, the qualitative score was higher (260 (250–290) vs. 190 (120–270), p = 0.036) while the gas fraction was lower (0.46 (0.32–0.47) vs. 0.59 (0.37–0.68), p = 0.047). A radiographic score above 230 had 100% sensitivity (95% confidence interval, CI: 66.4% to 100%) and 66.7% specificity (95% CI: 41.0% to 92.3%) to detect fibrotic samples, while a gas fraction below 0.57 had 100% sensitivity (95% CI: 66.4% to 100%) and 57.1% specificity (95% CI: 26.3% to 88.0%). In COVID-19 pneumonia, qualitative and quantitative analyses of lung CT images have high sensitivity but moderate to low specificity to detect histopathological fibrosis. Pseudofibrotic CT findings do not always correspond to increased collagen deposition.     

Transmission power requirements for novel ZigBee implants in the gastrointestinal tract

In this paper, a novel multinode wireless monitoring platform, based on ZigBee communication standard, is presented and tested in vivo. The transmission power levels needed to establish a reliable connection from the different gastrointestinal districts are reported and compared with safety levels from international guidelines. These findings can be useful to evaluate the effectiveness of a commercial and standardized approach to implantable and miniaturized monitoring of physiological parameters.     

Inhibition of the FGF/FGFR System Induces Apoptosis in Lung Cancer Cells via c-Myc Downregulation and Oxidative Stress

Lung cancer represents an extremely diffused neoplastic disorder with different histological/molecular features. Among the different lung tumors, non-small-cell lung cancer (NSCLC) is the most represented histotype, characterized by various molecular markers, including the expression/overexpression of the fibroblast growth factor receptor-1 (FGFR1). Thus, FGF/FGFR blockade by tyrosine kinase inhibitors (TKi) or FGF-ligand inhibitors may represent a promising therapeutic approach in lung cancers. In this study we demonstrate the potential therapeutic benefit of targeting the FGF/FGFR system in FGF-dependent lung tumor cells using FGF trapping (NSC12) or TKi (erdafitinib) approaches. The results show that inhibition of FGF/FGFR by NSC12 or erdafitinib induces apoptosis in FGF-dependent human squamous cell carcinoma NCI-H1581 and NCI-H520 cells. Induction of oxidative stress is the main mechanism responsible for the therapeutic/pro-apoptotic effect exerted by both NSC12 and erdafitinib, with apoptosis being abolished by antioxidant treatments. Finally, reduction of c-Myc protein levels appears to strictly determine the onset of oxidative stress and the therapeutic response to FGF/FGFR inhibition, indicating c-Myc as a key downstream effector of FGF/FGFR signaling in FGF-dependent lung cancers.     

Computer Simulations Then and Now: an Introduction and Historical Reassessment

NTM Zeitschrift für Geschichte der Wissenschaften, Technik und Medizin -     

Indoor air quality and the associated health risk in primary school buildings in Central Europe – The InAirQ study

The indoor air quality (IAQ) was investigated in sixty-four primary school buildings in five Central European countries (Czech Republic, Hungary, Italy, Poland, and Slovenia). The concentration of volatile organic compounds, aldehydes, PM_2.5 mass, carbon dioxide, radon, as well as physical parameters were investigated during the heating period of 2017/2018. Significant differences were identified for the majority of the investigated IAQ parameters across the countries. The median indoor/outdoor ratios varied considerably. A comprehensive evaluation of IAQ in terms of potential health effects and comfort perception was performed. Hazard quotient values were below the threshold value of 1 with one exception. In contrast, 31% of the school buildings were characterized by hazard index values higher than 1. The maximum cumulative ratio approach highlighted that the concern for non-carcinogenic health effects was either low or the health risk was driven by more substances. The median excess lifetime cancer risk values exceeded the acceptable value of 1 × 10⁻⁶ in the case of radon and formaldehyde. PM_2.5 mass concentration values exceeded the 24 h and annual guideline values set by the World Health Organization in 56 and 85% of the cases, respectively. About 80% of the schools could not manage to comply with the recommended concentration value for carbon dioxide (1000 ppm).     

Tunable,Grating-Gated,Graphene-On-Polyimide Terahertz Modulators

An electrically switchable graphene terahertz (THz) modulator with a tunable-by-design optical bandwidth is presented and it is exploited to compensate the cavity dispersion of a quantum cascade laser (QCL). Electrostatic gating is achieved by a metal grating used as a gate electrode, with an HfO₂/AlO_x gate dielectric on top. This is patterned on a polyimide layer, which acts as a quarter wave resonance cavity, coupled with an Au reflector underneath. The authors achieve 90% modulation depth of the intensity, combined with a 20 kHz electrical bandwidth in the 1.9–2.7 THz range. The modulator is then integrated with a multimode THz QCL. By adjusting the modulator operational bandwidth, the authors demonstrate that the graphene modulator can partially compensate the QCL cavity dispersion, resulting in an integrated laser behaving as a stable frequency comb over 35% of the operational range, with 98 equidistant optical modes and a spectral coverage ~1.2 THz. This paves the way for applications in the terahertz, such as tunable transformation-optics devices, active photonic components, adaptive and quantum optics, and metrological tools for spectroscopy at THz frequencies.     

Gas chromatographic study on high-temperature thermal degradation products of methyl linoleate hydroperoxides

Chromatographic techniques were used to separate secondary products generated by thermal degradation of methyl linoleate hydroperoxides (MLHP). The MLHP were obtained by oxidation, selected, and concentrated by solid-phase extraction (SPE) and thin-layer chromatography (TLC). The purified MLHP were then thermo-degraded in the gas-chromatographic glass liner and analyzed on-line by gas chromatography-mass spectrometry (GC-MS). The MLHP were also thermodegraded and collected in a short silicic acid-packed column, eluted, separated by TLC, and then analyzed by GC. By considering the elution in TLC, the GC retention times and the GC-MS analyses, it was possible to characterize the mono- and the dioxygenated secondary products, particularly those having a boiling point higher than methyl linoleate. The peaks that corresponded to the mono-oxygenated products (epoxy, hydroxy, and keto) were identified, and, on the basis of their MS spectra, molecular structures were proposed. A specific elution order was suggested for keto derivatives: 9-keto,Δ^10,12- and 13-keto,Δ^9,11-octadecadienoate. The hydroxy derivatives, which show the typical fragmentations of 9-hydroxy,Δ^10,12- and 13-hydroxy,Δ^9,11-octadecadienoate, were also identified. On the other hand, identification of the di-oxygenated compounds was more difficult, and, therefore, it was not possible to indicate each positional isomer; however, their elution order could be epoxy-hydroxy and epoxy-keto derivatives.     

Nanotube transistors as direct probes of the trap dynamics at dielectric-organic interfaces of interest in organic electronics and solar cells

The high sensitivity of nanotube transistors is used for the first time as a probe to study charge dynamics at a dielectric/polymer (polythiophene) interface, an inorganic/organic junction of particular importance for organic solar cells, and organic field effect transistors (OFETs). A carbon nanotube field effect transistor is coated with a thin film of a photoconductive polymer and photoexcited so as to generate carriers in the structure. Comparison between devices using SiO2 and TiO2 as gate dielectric reveals the critical role of the dielectric and clearly elucidates the relative contributions of the polymer and the dielectric layers on the separation, trapping, and relaxation of photogenerated charges.     

A life cycle approach to Green Public Procurement of building materials and elements: A case study on windows

Green Public Procurement (GPP) is a significant policy tool for reducing the environmental impacts of services and products throughout their whole life cycle. Scientific and easily verifiable environmental criteria, based on a life cycle approach, should be developed and used within procurement procedures. In this paper, Life Cycle Assessment (LCA) is applied to wood windows showing how it can support the criteria definition. After a foreword on GPP development in Italy, the evaluation features of the environmental performances of building materials and components are outlined. The LCA case study is then presented, describing the use of the analysis results to define the environmental criteria. LCA allowed to identify the main impacts and the critical processes of the window life cycle, giving a scientific framework to discuss GPP criteria with manufacturers associations and stakeholders. Nevertheless, it couldn’t help neither in identifying detailed criteria for GPP nor to define numerical thresholds to be used as reference in procurement procedures. The appropriate strategies should be selected taking into account the technical status of the market, the standard development and the voluntary industry commitments, involving manufacturers associations. Finally, some elements to develop a structured approach for GPP of construction materials are presented.