Effects of Probiotic Supplementation during Pregnancy on the Future Maternal Risk of Metabolic Syndrome

Probiotics are live microorganisms that induce health benefits in the host. Taking probiotics is generally safe and well tolerated by pregnant women and their children. Consumption of probiotics can result in both prophylactic and therapeutic effects. In healthy adult humans, the gut microbiome is stable at the level of the dominant taxa: Bacteroidetes, Firmicutes and Actinobacteria, and has a higher presence of Verrucomicrobia. During pregnancy, an increase in the number of Proteobacteria and Actinobacteria phyla and a decrease in the beneficial species Roseburia intestinalis and Faecalibacterium prausnitzii are observed. Pregnancy is a “window” to the mother’s future health. The aim of this paper is to review studies assessing the potentially beneficial effects of probiotics in preventing the development of diseases that appear during pregnancy, which are currently considered as risk factors for the development of metabolic syndrome, and consequently, reducing the risk of developing maternal metabolic syndrome in the future. The use of probiotics in gestational diabetes mellitus, preeclampsia and excessive gestational weight gain is reviewed. Probiotics are a relatively new intervention that can prevent the development of these disorders during pregnancy, and thus, would reduce the risk of metabolic syndrome resulting from these disorders in the mother’s future.     

Effect of Antibiotic Amphotericin B Combinations with Selected 1,3,4-Thiadiazole Derivatives on RPTECs in an In Vitro Model

4-(5-methyl-1,3,4-thiadiazole-2-yl) benzene-1,3-diol (C1) and 4-[5-(naphthalen-1-ylmethyl)-1,3,4-thiadiazol-2-yl] benzene1,3-diol (NTBD) are representative derivatives of the thiadiazole group, with a high antimycotic potential and minimal toxicity against normal human fibroblast cells. The present study has proved its ability to synergize with the antifungal activity of AmB. The aim of this work was to evaluate the cytotoxic effects of C1 or NTBD, alone or in combination with AmB, on human renal proximal tubule epithelial cells (RPTECs) in vitro. Cell viability was assessed with the MTT assay. Flow cytometry and spectrofluorimetric techniques were used to assess the type of cell death and production of reactive oxygen species (ROS), respectively. The ELISA assay was performed to measure the caspase-2, -3, and -9 activity. ATR-FTIR spectroscopy was used to evaluate biomolecular changes in RPTECs induced by the tested formulas. The combinations of C1/NTBD and AmB did not exert a strong inhibitory effect on the viability/growth of kidney cells, as evidenced by the negligible changes in the apoptotic/necrotic rate and caspase activity, compared to the control cells. Both NTBD and C1 displayed stronger anti-oxidant activity when combined with AmB. The relatively low nephrotoxicity of the thiadiazole derivative combinations and the protective activity against AmB-induced oxidative stress may indicate their potential use in the therapy of fungal infections.     

The Impact of Linseed Oil Lipids on the Physical Properties of Corn Crisps and the Possibility of Obtaining Crisps Enriched with n‐3 Fatty Acids

Linseed oil, also known as flaxseed oil, is obtained from the dried, ripened seeds of the flax plant (Linum usitatissimum). The oil is obtained by pressing, sometimes followed by solvent extraction supported by a refining process. Linseed oil is an edible oil that is in demand as a nutritional supplement, as a source of α‐linolenic acid an n‐3 fatty acid. The aim of this work was to investigate: (1) the influence of the corn crisp extrusion process on the degradation of fatty acids in linseed oil (LO) and some preparations obtained from the linseed oil such as ethyl ester (EE) and free fatty acids (FFA) added to the corn in order to increase the nutritional value of the crisps, (2) influence of the oil and two fatty preparations obtained from it on the quality of corn crisps, (3) interaction of the lipid fraction with starch. The extrusion process did not degrade the fatty acids significantly. Expansion ratio obtained in the corn crisp extrusion process decreased from 620 % down to 153 %, the size of pores/thickness of the starch–protein walls forming the structure of the extruded product decreased from 10 μm down to 4 μm, the hardness of the crisps increased from 20 to 75 N, and number of lipid–starch complexes increased with rising polarity of the lipid fraction. FFA were complexed mostly by starch (about 90 %), to a lesser degree by EE (about 60 %) and to the least extent by triacylglycerols (about 10 %). The studies performed under industrial conditions using the single screw extruder for the production of corn crisps with the application of standard parameters of the extrusion process indicated that the addition of a mass of 5 % of the various lipids (triacylglycerols of linseed oil, ethyl esters and fatty acids obtained from linseed oil) to corn grits prior to the extrusion process significantly affect the quality of corn crisps.     

Complex modification effect of linseed cake as an agricultural waste filler used in high density polyethylene composites

Linseed cake (LC) is a by-product of agricultural industry which does not have any large-scale industrial applications. The possibilities of its utilization as filler with plasticizing ability for high density polyethylene (HDPE)-based composites have been investigated. Composites containing 5, 10, 20 and 30 wt% of the waste filler have been prepared using a melt mixing method. The influence of the LC on the mechanical and thermomechanical properties of the composites, as well as their water absorption and morphology, have been evaluated by the following methods: static tensile test, impact strength assessment using Dynstat method, hardness measurements, differential scanning calorimetry, dynamic mechanical thermal analysis, scanning electron microscopy observations, measurements of Vicat’s softening temperature and water uptake test. Application of different measuring techniques allows for describing complex modification effects of the composites’ properties changes induced by the presence of lignocellulosic filler with high oil content. The results of the study proved a pronounced influence of LC on high density polyethylene-based composites, especially a plasticizing effect of crude linseed oil contained by the waste filler particles. LC also has been assumed to affect the polymeric matrix crystallization process. It was found that complex modification of polyethylene results from simultaneously occurring different phenomena including: plasticization of the HDPE by linseed oil, improved crystallinity of the semicrystalline matrix, presence of the rigid lignocellulosic particles dispersed in polymer and accumulation of the oil in the interfacial regions.     

Identification of tillering node proteins differentially accumulated in barley recombinant inbred lines with different juvenile growth habits

Barley (Hordeum vulgare L.) is an important cereal crop grown for both the feed and malting industries. The allelic dwarfing gene sdw1/denso has been used throughout the world to develop commercial barley varieties. Proteomic analysis offers a new approach to identify a broad spectrum of genes that are expressed in the living system. Two-dimensional electrophoresis and mass spectrometry were applied to investigate changes in protein abundance associated with different juvenile growth habit as effect of the denso locus in barley homozygous lines derived from a Maresi × Pomo cross combination. A total of 31 protein spots were revealed that demonstrate quantitative differences in protein abundance between the analyzed plants with different juvenile growth habit, and these protein spots were selected to be identified by mass spectrometry. Identification was successful for 27 spots, and functional annotations of proteins revealed that most of them are involved in metabolism and disease/defense-related processes. Functions of the identified proteins and their probable influence on the growth habit in barley are discussed.     

AAOP-based dynamically reconfigurable monitoring system

A key aspect of resource management is efficient and effective deployment of available resources whenever needed. The issue typically covers two areas: monitoring of resources used by software systems and managing the consumption of resources. A key aspect of each monitoring system is its reconfigurability – the ability of a system to limit the number of resources monitored at a given time to those that are really necessary at any particular moment. The authors of this article propose a fully dynamic and reconfigurable monitoring system based on the concept of Adaptable Aspect-Oriented Programming (AAOP) in which a set of AOP aspects is used to run an application in a manner specified by the adaptability strategy. The model can be used to implement systems that are able to monitor an application and its execution environment and perform actions such as changing the current set of resource management constraints applied to an application if the application/environment conditions change. Any aspect that implements a predefined interface may be used by the AAOP-based monitoring system as a source of information. The system utilizes the concept of dynamic AOP, meaning that the aspects (which are sources of information) may be dynamically enabled/disabled.     

In Silico Study on Tumor-Size-Dependent Thermal Profiles inside an Anthropomorphic Female Breast Phantom Subjected to Multi-Dipole Antenna Array

Electromagnetic hyperthermia as a potent adjuvant for conventional cancer therapies can be considered valuable in modern oncology, as its task is to thermally destroy cancer cells exposed to high-frequency electromagnetic fields. Hyperthermia treatment planning based on computer in silico simulations has the potential to improve the localized heating of breast tissues through the use of the phased-array dipole applicators. Herein, we intended to improve our understanding of temperature estimation in an anatomically accurate female breast phantom embedded with a tumor, particularly when it is exposed to an eight-element dipole antenna matrix surrounding the breast tissues. The Maxwell equations coupled with the modified Pennes’ bioheat equation was solved in the modelled breast tissues using the finite-difference time-domain (FDTD) engine. The microwave (MW) applicators around the object were modelled with shortened half-wavelength dipole antennas operating at the same 1 GHz frequency, but with different input power and phases for the dipole sources. The total input power of an eight-dipole antenna matrix was set at 8 W so that the temperature in the breast tumor did not exceed 42 °C. Finding the optimal setting for each dipole antenna from the matrix was our primary objective. Such a procedure should form the basis of any successful hyperthermia treatment planning. We applied the algorithm of multi for multi-objective optimization for the power and phases for the dipole sources in terms of maximizing the specific absorption rate (SAR) parameter inside the breast tumor while minimizing this parameter in the healthy tissues. Electro-thermal simulations were performed for tumors of different radii to confirm the reliable operation of the given optimization procedure. In the next step, thermal profiles for tumors of various sizes were calculated for the optimal parameters of dipole sources. The computed results showed that larger tumors heated better than smaller tumors; however, the procedure worked well regardless of the tumor size. This verifies the effectiveness of the applied optimization method, regardless of the various stages of breast tumor development.     

Detectability of dynamic photon emission in static Si CCD for signal path determination in integrated circuits

The detection of dynamic photon emission by static cameras is an inexpensive approach to track circuit signal paths, but successful application depends on the signal pattern and frequency the devices are operating at. For improvement of predictability, a model has been developed, built upon the composition of operating modes and targeted to calculate the static emission signal. On single transistor test structures, the model is verified and an operating frequency correlates to the detection limit. Ring oscillator results confirm that only a fraction of the inverter switching time is accompanied by photon emission. At a real circuit it is demonstrated that operating condition limits for signal path detection in static photon emission detectors can be defined.