Codeposition of nickel–phosphorus alloys reinforced with boron carbide microparticles: direct and pulse plating

Nickel–phosphorus alloys were codeposited with boron carbide particles. Two compositions of nickel-phosphorus, one presenting a low phosphorus content in the order of 4% wt. and another one presenting a high phosphorus content of about 12% wt., were deposited from modified Watts nickel electrolytes using both direct and pulse plating. A strong influence of the deposition method was observed on the phosphorus content in the matrix and on the quantity of codeposited particles. Pulse plating was found to significantly increase both of them. Nucleation of the pure nickel–phosphorus alloy and of the codeposit were studied using chronoamperometry and AFM in potentiostatic mode. An instantaneous nucleation mechanism was evidenced on iron and gold substrates. Microhardness was measured and linked to the phosphorous and particle contents.     

Probing effects of alternately‐embedded phenoxy phenyl lateral groups on properties of novel aromatic poly(ether‐urea)s

A new class of alternate aromatic poly(ether‐urea)s having bulky phenoxy phenyl lateral groups was prepared by the reaction of 2,2′‐bis[(p‐phenoxy phenyl)]‐4,4′‐diaminodiphenyl ether (PPAPE) with two diisocyanates, isophorone diisocyanate and 2,4‐tolylene diisocyanate. The limited viscosity values as well as M _n and M _w values of the resulting polymers were determined. The resulting poly(ether‐urea)s could be easily cast into optically‐transparent, flexible, and light color films. The cut‐off wavelength values and the percentage of transmittance at 800 nm were found to be at about 415 nm and 85%, respectively. PPAPE‐derived poly(ether‐urea)s showed a low‐crystallinity and had excellent solubility in polar organic solvents. T_onset, T_g, T_d5%, and T_d10% values of the PPAPE‐derived polymers measured from their DSC and TGA thermograms were up to 270, 280, 315, and 340°C, respectively. Surface morphology of the resulted poly(ether‐urea)s were also evaluated by their scanning electron microscopy images. Excellent organo‐solubility, satisfactory film quality, moderate T_g values, and good thermal stability make this class of poly (ether‐urea)s promising high‐performance polymeric materials. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Preparation and characterization of poly(vinyl alcohol)/gum tragacanth/cellulose nanocomposite film

The effects of gum tragacanth obtained from two species of Astragalus Gossypinus (GT-G) and A. Parrowianus (GT-P) at two levels of 10% and 30% combined with cellulose nanofibers (CNF; 5%) on the physico-mechanical and structural properties of polyvinyl alcohol (PVA) nanocomposite film were investigated in this study. The water solubility and water vapor permeability of the films decreased with increasing the content of both gums, especially in the film containing 30% GT-P. The highest values of the tensile strength (39.3 MPa) and elongation at break (445%) belonged to the treatment containing 10% GT-P (90/10P/0). The FTIR and DSC analyses confirmed good interactions between GT and PVA in the 90/10P/0 treatment. SEM images indicated the dense structure of this film as the optimum treatment. Although the presence of CNF in the films containing GT-G improved some properties, especially the Young modulus, it impaired all the functional properties of nanocomposite GT-P film.     

Protein Kinase C as a Therapeutic Target in Non-Small Cell Lung Cancer

Driver-directed therapeutics have revolutionized cancer treatment, presenting similar or better efficacy compared to traditional chemotherapy and substantially improving quality of life. Despite significant advances, targeted therapy is greatly limited by resistance acquisition, which emerges in nearly all patients receiving treatment. As a result, identifying the molecular modulators of resistance is of great interest. Recent work has implicated protein kinase C (PKC) isozymes as mediators of drug resistance in non-small cell lung cancer (NSCLC). Importantly, previous findings on PKC have implicated this family of enzymes in both tumor-promotive and tumor-suppressive biology in various tissues. Here, we review the biological role of PKC isozymes in NSCLC through extensive analysis of cell-line-based studies to better understand the rationale for PKC inhibition. PKC isoforms α, ε, η, ι, ζ upregulation has been reported in lung cancer, and overexpression correlates with worse prognosis in NSCLC patients. Most importantly, PKC isozymes have been established as mediators of resistance to tyrosine kinase inhibitors in NSCLC. Unfortunately, however, PKC-directed therapeutics have yielded unsatisfactory results, likely due to a lack of specific evaluation for PKC. To achieve satisfactory results in clinical trials, predictive biomarkers of PKC activity must be established and screened for prior to patient enrollment. Furthermore, tandem inhibition of PKC and molecular drivers may be a potential therapeutic strategy to prevent the emergence of resistance in NSCLC.     

Investigation of immiscible CO2 and C1 injection and comparison with water injection for enhanced oil recovery in naturally fractured reservoirs

Reservoir oil and gas content tends to rise up to the surface as long as their potential energy levels are sufficient. In order to amplify this energy, either during the time when oil is uprising on its inherent energy or since after, so as to facilitate the traveling of oil to the surface, enhanced oil recovery (EOR) methods come into play. Furthermore, the increasing demand for oil from one hand, and the shrinkage of producible reserves on the other hand, have made it unavoidable to undertake EOR techniques. Built in this research was a 10-element model of reservoir fluid to simulate its behavior. Furthermore, slim tube simulation was undertaken to determine minimum miscibility pressure for various gases. Then, different scenarios of natural depletion, CO₂ injection, methane injection, and water injection were simulated by ECLIPSE 300 software package with the results of different scenarios compared. The results indicated water injection to be associated with higher recovery factor.     

Evaluation of suspended load transport rate using transport formulas and artificial neural network models （Case study： Chelchay Catchment）＊

Accurate estimation of sediment load or transport rate is very important to a wide range of water resources projects. This study was undertaken to determine the most appropriate model to predict suspended load in the Chelchay Watershed, northeast of Iran. In total, 59 data series were collected from four gravel bed-rivers and a sand bed river and two depth integrating suspended load samplers to evaluate nine suspended load formulas and feed forward backpropagation Artificial Neural Network (ANN) structures. Although the Chang formula with higher correlation coefficient (r = 0.69) and lower Root Mean Square Error (RMSE = 0.013) is the best suspended load predictor among the nine studied formulas, the ANN models significantly outperform traditional suspended load formulas and show their superior performance for all statistical parameters. Among different ANN structures two models including 4 inputs, 4 hidden and one output neurons, and 4 inputs, 4 and one hidden and one output neurons provide the best simulation with the RMSE values of 0.0009 and 0.001, respectively.     

A 0.2-W Heterostructure Barrier Varactor Frequency Tripler at 113 GHz

We present a high-power InAlAs/InGaAs/InP heterostructure barrier varactor (HBV) frequency tripler. The HBV device topology was designed for efficient thermal dissipation and high efficiency. To verify simulations, the device was flip-chip soldered onto embedding microstrip circuitry on an aluminum nitride substrate. This hybrid circuit was then mounted in a waveguide block without any movable tuners. From the resulting RF measurements, the maximum output power was 195 mW at 113 GHz, with a conversion efficiency of 15%. The measured 3-dB bandwidth was 1.5%     

Design and implementation of an adaptive fuzzy sliding mode controller for drug delivery in treatment of vascular cancer tumours and its optimisation using genetic algorithm tool

In this paper, the side effects of drug therapy in the process of cancer treatment are reduced by designing two optimal non‐linear controllers. The related gains of the designed controllers are optimised using genetic algorithm and simultaneously are adapted by employing the Fuzzy scheduling method. The cancer dynamic model is extracted with five differential equations, including normal cells, endothelial cells, cancer cells, and the amount of two chemotherapy and anti‐angiogenic drugs left in the body as the engaged state variables, while double drug injection is considered as the corresponding controlling signals of the mentioned state space. This treatment aims to reduce the tumour cells by providing a timely schedule for drug dosage. In chemotherapy, not only the cancer cells are killed but also other healthy cells will be destroyed, so the rate of drug injection is highly significant. It is shown that the simultaneous application of chemotherapy and anti‐angiogenic therapy is more efficient than single chemotherapy. Two different non‐linear controllers are employed and their performances are compared. Simulation results and comparison studies show that not only adding the anti‐angiogenic reduce the side effects of chemotherapy but also the proposed robust controller of sliding mode provides a faster and stronger treatment in the presence of patient parametric uncertainties in an optimal way. As a result of the proposed closed‐loop drug treatment, the tumour cells rapidly decrease to zero, while the normal cells remain healthy simultaneously. Also, the injection rate of the chemotherapy drug is very low after a short time and converges to zero.     

Oxygen reduction activity of Pt and Pt-Mn-Co electrocatalysts sputtered on nano-structured thin film support

We report on extensive measurements of oxygen reduction activity of Pt and Pt-Co-Mn electrocatalysts using the rotating ring-disk electrode (RRDE) method. The electrocatalysts were prepared by sputtering from Pt or Pt, Co and Mn targets onto 3M's nano-structured thin film support (NSTF) structures. The area specific activity of Pt/NSTF, measured in 0.1 M HClO₄ and at room temperature, is similar to that of bulk Pt. The area specific measurements show a 20 mV reduction in the Pt-Co-Mn/NSTF overpotential compared to Pt/NSTF. The corresponding kinetic gain in the area specific activity of the ternary alloy is about a factor of two. This ORR enhancement factor observed in the ternary Pt-Co-Mn/NSTF by RRDE measurements is similar to the results obtained in 50 cm² H₂/air fuel cells.     

Morphology enhancement of TiO2/PVP composite nanofibers based on solution viscosity and processing parameters of electrospinning method

In this work, different sol solutions with various titanium tetraisopropoxide (TIP)/glacial acetic acid ratios in 2‐propanol with 5 wt % poly(vinyl pyrrolidone) (PVP) (M_w = 360,000 g/mol) were prepared and electrospun. Composition of the prepared sols and as‐spun TiO₂/PVP nanofibers were determined by Fourier transform infrared and Raman spectroscopy methods. Morphology of the electrospun TiO₂/PVP nanofibers was studied by scanning electron microscopy and transmission electron microscopy (TEM) techniques. Rheometry measurements of the sol solutions showed decrease of viscosity upon the addition of TIP to the polymer solutions with constant polymer and acid concentrations. The sol solution having the lowest viscosity (at shear rate 10 s^?1) but the highest TIP/glacial acetic acid ratio showed beaded nanofibers morphology when electrospun under 10 and 12 kV applied voltage while injection rate, needle tip to collector distance, and needle gauge were kept constant. However, smooth electrospun TiO₂/PVP composite nanofibers with the average nanofibers diameters (148 ± 79 nm) were achieved under the same condition when applied voltage increased to 15 kV. TEM micrographs of the electrospun TiO₂/PVP nanofiber showed that the TiO₂ particles with continuous structure are formed at the middle of the nanofiber and distributed along its axis. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46337.