Electronic Interactions of Cyclopropyl Groups: Synthesis and Photoelectron Spectra of Model Compounds Derived from Triasterane,Nortricyclane and Norbornane

The syntheses of the new hydrocarbons trimethylenetriasterane 12 , trispirocyclopropanetriasterane 3 , trispirocyclopropanenortricyclane 4 , and of the trispirocyclopropanenorbornanes 5, 6 , and 7 are reported. 12 contains six vinylcyclopropane units rigidly held in an antiperiplanar (ap) conformation in a D_3h symmetric framework. 3 and 4 are the first model compounds with bicyclopropyl units rigidly fixed in an s-trans (ap) conformation (Θ = 180°). Their PE spectra reveal that the interaction parameter β_ww = −1.73 eV for this arrangement is the same as that for Θ = 0°.     

Commercial white paint as back surface reflector for thin-film solar cells

In this work, commercially available white paint is applied as a pigmented diffuse reflector (PDR) on the rear surface of thin-film crystalline silicon (c-Si) solar cells with a silicon thickness in the 1–2 μm range. We show that white paint increases the short-circuit current density of the solar cells enormously, with a boost of 41% observed for very thin planar solar cells illuminated with the global AM1.5 solar spectrum. We also show that white paint is a better back surface reflector (BSR) than aluminium, air, a transparent conductive oxide (TCO)/aluminium stack, and even a detached aluminium mirror. While previous studies have investigated the influence of PDRs on silicon solar cells with thicknesses of over 27 μm, this work closes the gap that has existed for much thinner cells.     

ESEM investigations for assessment of damage kinetics of short glass fibre reinforced thermoplastics - Results of in situ tensile tests coupled with acoustic emission analysis

The damage mechanisms of short glass fibre reinforced polypropylene (PP) and polybutene-1 (PB-1) materials were investigated. For this purpose, in situ tensile tests were conducted in the environmental scanning electron microscope (ESEM) while simultaneously recording the acoustic emission (AE). To be able to observe damage mechanisms directly during loading, notched specimens were used. This method allows the direct correlation of the recorded load - elongation data with observed damage mechanisms, as well as correlations with acoustic emission data. Hence, it is possible to describe the damage kinetics of short glass fibre composite.It was found that different bonding conditions of the two investigated materials result in different damage mechanisms as well as in different AE behaviour. For fibre reinforced PP with excellent bonding conditions of the fibres in the polymeric matrix, fibre fracture, slipping of fibres in the delamination area, debonding and pull-out with matrix yielding was observed. The determined AE parameter amplitude A_p and energy E_AE for the PB-1 material are lower because of the weak bonding of the fibres to the PB-1-matrix. Hence, energy dissipative damage mechanisms like pull-out with matrix yielding can occur only in a limited part of such materials.     

Synthesis of novel tricalcium phosphate-bioactive glass composite and functionalization with rhBMP-2

A functionalization is required for calcium phosphate-based bone substitute materials to achieve an entire bone remodeling. In this study it was hypothesized that a tailored composite of tricalcium phosphate and a bioactive glass can be loaded sufficiently with rhBMP-2 for functionalization. A composite of 40 wt% tricalcium phosphate and 60 wt% bioactive glass resulted in two crystalline phases, wollastonite and rhenanite after sintering. SEM analysis of the composite’s surface revealed a spongious bone-like morphology after treatment with different acids. RhBMP-2 was immobilized non-covalently by treating with chrome sulfuric acid (CSA) and 3-aminopropyltriethoxysilane (APS) and covalently by treating with CSA/APS, and additionally with 1,1′-carbonyldiimidazole. It was proved that samples containing non-covalently immobilized rhBMP-2 on the surface exhibit significant biological activity in contrast to the samples with covalently bound protein on the surface. We conclude that a tailored composite of tricalcium phosphate and bioactive glass can be loaded sufficiently with BMP-2.     

Two-dimensional random projection

As an alternative to adaptive nonlinear schemes for dimensionality reduction, linear random projection has recently proved to be a reliable means for high-dimensional data processing. Widespread application of conventional random projection in the context of image analysis is, however, mainly impeded by excessive computational and memory requirements. In this paper, a two-dimensional random projection scheme is considered as a remedy to this problem, and the associated key notion of concentration of measure is closely studied. It is then applied in the contexts of image classification and sparse image reconstruction. Finally, theoretical results are validated within a comprehensive set of experiments with synthetic and real images.     

Integrated scanning Kelvin probe-scanning electrochemical microscope system: development and first applications

The integration of a scanning Kelvin probe (SKP) and a scanning electrochemical microscope (SECM) into a single SKP-SECM setup, the concept of the proposed system, its technical realization, and first applications are presented and discussed in detail. A preloaded piezo actuator placed in a grounded stainless steel case was used as the driving mechanism for oscillation of a Pt disk electrode as conventionally used in SECM when the system was operated in the SKP mode. Thus, the same tip is recording the contact potential difference (CPD) during SKP scanning and is used as a working electrode for SECM imaging in the redox-competition mode (RC-SECM). The detection of the local CPD is established by amplification of the displacement current at an ultralow noise operational amplifier and its compensation by application of a variable backing potential (V(b)) in the external circuit. The control of the tip-to-sample distance is performed by applying an additional alternating voltage with a much lower frequency than the oscillation frequency of the Kelvin probe. The main advantage of the SKP-SECM system is that it allows constant distance measurements of the CPD in air under ambient conditions and in the redox-competition mode of the SECM in the electrolyte of choice over the same sample area without replacement of the sample or exchange of the working electrode. The performance of the system was evaluated using a test sample made by sputtering thin Pt and W films on an oxidized silicon wafer. The obtained values of the CPD correlate well with known data, and the electrochemical activity for oxygen reduction is as expected higher over Pt than W.     

Immune Aging and Immunotherapy in Cancer

Immune functions decline as we age, while the incidence of cancer rises. The advent of immune checkpoint blockade (ICB) has not only revolutionized cancer therapy, but also spawned great interest in identifying predictive biomarkers, since only one third of patients show treatment response. The aging process extensively affects the adaptive immune system and thus T cells, which are the main target of ICB. In this review, we address age-related changes regarding the adaptive immune system with a focus on T cells and their implication on carcinogenesis and ICB. Differences between senescence, exhaustion, and anergy are defined and current knowledge, treatment strategies, and studies exploring T cell aging as a biomarker for ICB are discussed. Finally, novel approaches to improve immunotherapies and to identify biomarkers of response to ICB are presented and their potential is assessed in a comparative analysis.