PTR-MS assessment of photocatalytic and sorption-based purification of recirculated cabin air during simulated 7-h flights with high passenger density

Four different air purification conditions were established in a simulated 3-row 21-seat section of an aircraft cabin: no air purifier; a photocatalytic oxidation unit with an adsorptive prefilter; a second photocatalytic unit with an adsorptive prefilter; and a two-stage sorption-based air filter (gas-phase absorption and adsorption). The air purifiers placed in the cabin air recirculation system were commercial prototypes developed for use in aircraft cabin systems. The four conditions were established in balanced order on 4 successive days of each of 4 successive weeks during simulated 7-h flights with 17 occupants. Proton-transfer reaction mass spectrometry was used to assess organic gas-phase pollutants and the performance of each air purifier. The concentration of most organic pollutants present in aircraft cabin air was efficiently reduced by all three units. The photocatalytic units were found to incompletely oxidize ethanol released by the wet wipes commonly supplied with airline mealsto produce unacceptably high levels of acetaldehyde and formaldehyde.     

Influence of farming conditions on colour and texture of European catfish (Silurus glanis) flesh

The colour of raw fillets and the texture of cooked fillets of European catfish (Silurus glanis) were studied. The catfish fillets resulted from two types of farming conditions used in France. Sensory and instrumental analyses were performed on the fillets. Two farming parameters were found to affect the colour and texture of European catfish fillets: water temperature and farming time. The shorter the farming time was, the lighter the fillets were, while a higher water temperature produced yellower and greener fillets. A higher water temperature and a longer farming time produced softer cooked fillets, while the higher the water temperature was, the less juicy the cooked fillets were. A good correlation and complementarity were observed between sensory and instrumental analyses of the colour and texture of European catfish fillets. Copyright © 2007 Society of Chemical Industry     

Effects of sampling and extraction on deoxynivalenol quantification

Deoxynivalenol was extracted from wheat grain and quantified by GC-ECD. The quantification of deoxynivalenol can be critical, for example in certifying the amount of the mycotoxin in a lot and determining if this amount is over or under a fixed limit. Thus, an objective was to obtain representative samples to monitor DON quantification variability. We show that among the different steps of analysis the critical one is grain sampling. We also show that we were able to significantly improve the extraction rate without increasing the variability by using a longer extraction time with a magnetic agitator, and a grinding process which takes into account both the heterogeneous repartition of deoxynivalenol within wheat grains and different extraction rates according to the size of the flour powder particles. Thus, it could be of interest to use this methodology to determine if a lot is above or below a maximum limit because it enables the detection limit to be lowered, thereby simplifying the subsequent analysis.     

Single-frequency Sb-based distributed-feedback lasers emitting at 2.3 microm above room temperature for application in tunable diode laser absorption spectroscopy

GaInAsSb/GaAlAsSb/GaSb distributed-feedback (DFB) laser diodes based on a type I active region were fabricated by molecular beam epitaxy at the Centre d'Electronique et de Micro-Optoélectronique de Montpellier (CEM2). The DFB processing was done by Nanoplus Nanosystems and Technologies GmbH. The devices work in the continuous-wave regime above room temperature around an emission wavelength of 2.3 microm with a side-mode suppression ratio greater than 25 dB and as great as 10 mW of output power. The laser devices are fully characterized in terms of optical and electrical properties. Their tuning properties made them adaptable to tunable diode laser absorption spectroscopy because they exhibit more than 220 GHz of continuous tuning by temperature or current. The direct absorption of CH4 is demonstrated to be possible with high spectral selectivity.     

Do sewage treatment plant discharges substantially impair fish reproduction in polluted rivers?

Sewage treatment plants are frequently associated with the release of xenobiotics and, consequently, with alterations of the reproductive function induced by many of these substances in aquatic organisms. In order to assess the impacts of sewage treatment plant (STP) discharges in polluted rivers, two sentinel species (gudgeon Gobio gobio and stoneloach Barbatula barbatula) were caught during their reproductive cycle upstream and downstream two STPs (STP1--Goffontaine, STP2--Wegnez). Gonadosomatic index, histological (testicular and ovarian stages, atretic follicles, intersexuality) and endocrine (sex steroids, aromatase activity, alkali-labile phosphorus) parameters were assayed. In brief, the results revealed no systematic significant differences (p<0.05) between upstream and downstream sites, whatever the STP, species or sampling period. However, stoneloach females displayed some signs of reproductive impairment and endocrine disruption downstream STP1 (reduced GSI, oocyte diameter and ALP concentrations, increased proportion of atretic follicles) and STP2 (changes in gonadal aromatase activity and plasma levels of 11-KT and T). Few significant changes were observed for gudgeon males and females while there were no significant differences between upstream and downstream sites for stoneloach males. Moreover, plasma E(2) concentrations recorded in gudgeon males sampled in all sites were as high as in females and this was confirmed by high ALP levels. Besides, spermatogenesis of gudgeon males was delayed in STP1 upstream and downstream sites compared to the corresponding sites in STP2. These observations for gudgeon males do not seem related to STP discharge but to a probable estrogenicity of the river. Therefore, as shown by the results, stoneloach seemed more sensitive than gudgeon to STP discharges. In the present study, sewage treatment plant discharges do not substantially impair fish reproduction. In this respect, caution is required when generalising negative impacts of STP discharges.     

Characterization of hydrophobic peptides by atmospheric pressure photoionization-mass spectrometry and tandem mass spectrometry

The use of photoionization at atmospheric pressure shows great potential for the mass analysis of large apolar or hydrophobic peptides. Mass spectra that were obtained using this technique showed mainly singly charged ions. While polar peptides spectra do not produce fragment ions, others lead to B-type or C-type in-source fragmentation. These dissociation reactions, which could involve electron capture dissociation processes in the case of the C-type ions, are observed for hydrophobic peptides. Both the compatibility of this ionization mode with reversed- or normal-phase liquid chromatographic separation and its sensitivity allow liquid chromatography coupling to both mass spectrometry and tandem mass spectrometry for the analyses of hydrophobic peptide mixtures. Atmospheric pressure photoionization seems to be an interesting alternative method to study hydrophobic peptides that are not easily ionizable by more classical ionization techniques such as electrospray ionization and matrix-assisted laser desorption/ionization.     

Modelling dynamic memory management in constraint-based testing

Constraint-based testing (CBT) is the process of generating test cases against a testing objective by using constraint solving techniques. When programs contain dynamic memory allocation and loops, constraint reasoning becomes challenging as new variables and new constraints should be created during the test data generation process. In this paper, we address this problem by proposing a new constraint model of C programs based on operators that model dynamic memory management. These operators apply powerful deduction rules on abstract states of the memory enhancing the constraint reasoning process. This allows to automatically generate test data respecting complex coverage objectives. We illustrate our approach on a well-known difficult example program that contains dynamic memory allocation/deallocation, structures and loops. We describe our implementation and provide preliminary experimental results on this example that show the highly deductive potential of the approach.     

Characterization of biodegradable core–clad borosilicate glass fibers with round and rectangular cross-section

Here, we report on core–clad bioactive borosilicate fibers, that we have prepared both with round and rectangular cross-section profile. The exposed approach, which relies on the stacking and drawing of glass slabs, demonstrates our ability to develop bioactive-based glass fibers with tailored cross-section profiles. Tens-of-meters-long fibers were successfully drawn, although suffering from elevated losses in the case of the rectangular ones. The response of the fibers in simulated body fluid was studied for both geometries. We found that a round cladding can act as protective layer, tempering effects of the corrosion. We also noticed that rectangular fibers are more prone to degradation, the enhanced corrosion beginning from their sharp corners as they accumulated residual tensile stress during drawing. To the best of our knowledge, this is the first report on the effect of residual tensile stresses from surface tension deformations applied to the corrosion of rectangular fibers. As geometry plays a critical role on the biodegradation behavior of the fiberglass, we believe the enclosed results could lead to the design of fiber devices with tailored cross-section profile in order to tune their rate of degradation on solely based geometrical effects.     

The Impact of X-Ray Radiation on Chemical and Optical Properties of Triple-Cation Lead Halide Perovskite: from the Surface to the Bulk

Understanding the effects of X-rays on halide perovskite thin films is critical for accurate and reliable characterization of this class of materials, as well as their use in detection systems. In this study, advanced optical imaging techniques are employed, both spectrally and temporally resolved, coupled with chemical characterizations to obtain a comprehensive picture of the degradation mechanism occurring in the material during photoemission spectroscopy measurements. Two main degradation pathways are identified through the use of local correlative physico-chemical analysis. The first one, at low X-Ray fluence, shows minor changes of the surface chemistry and composition associated with the formation of electronic defects. Moreover, a second degradation route occurring at higher fluence leads to the evaporation of the organic cations and the formation of an iodine-poor perovskite. Based on the local variation of the optoelectronic properties, a kinetic model describing the different mechanisms is proposed. These findings provide valuable insight on the impact of X-rays on the perovskite layers during investigations using X-ray based techniques. More generally, a deep understanding of the interaction mechanism of X-rays with perovskite thin films is essential for the development of perovskite-based X-ray detectors and solar for space applications.