Human Chorionic Gonadotropin and Early Embryogenesis: Review

Human chorionic gonadotropin (hCG) has four major isoforms: classical hCG, hyperglycosylated hCG, free β subunit, and sulphated hCG. Classical hCG is the first molecule synthesized by the embryo. Its RNA is transcribed as early as the eight-cell stage and the blastocyst produces the protein before its implantation. This review synthetizes everything currently known on this multi-effect hormone: hCG levels, angiogenetic activity, immunological actions, and effects on miscarriages and thyroid function.     

Tribological behavior of composites fabricated by reactive SPS sintering in Ti-Si-C system

In this study, wear and friction behavior of two based-composites from the Ti-Si-C system, (40 wt% TiC; 28 wt% Ti₅Si₃; 17 wt% Ti₃SiC₂) and (18 wt% TiC; 26 wt% Ti₅Si₃; 41 wt% Ti₃SiC₂) reinforced by 15 wt% of large size SiC (100-150 µm) particles were investigated. The four-phase composites exhibited approximatively the same friction coefficient (µ ~ 0.9) under high loads (10 N and 7 N). The composite with high Ti₃SiC₂ showed higher wear rate values by one order of magnitude. However, under 1 N, the composite with high TiC content showed a higher running-in period and a lower steady state µ value (0.37 after 1000 m sliding distance). Scanning electron microscopy, Energy Dispersive X-Ray and Raman spectroscopy analysis of the worn surfaces of the two composites revealed that oxidation was the dominant wear mechanism. The oxidation process and the removal kinetics of the oxides during sliding controlled the tribological behavior of the composites. The influence of processing variables on microstructures development and wear mechanisms of the composites is discussed.     

Synthesis of fatty hydroxamic acids catalyzed by the lipase ofMucor miehei

Biotechnological synthesis of a new class of amphiphilic molecules—fatty hydroxamic acids—was carried out using the lipase ofMucor miehei by reacting hydroxyl amine with the fatty acids in their free or methyl ester form. Concurrently with enzymatic synthesis, chemical synthesis of hydroxamic fatty acids has also been developed by adapting methods that already existed for water-soluble acids. Different parameters were studied to determine the optimum operating conditions: temperature, molar ratio of reagents, quantity of biocatalyst and length of reaction. A general method, whatever the type of fatty acids used, is described.     

INFLUENCE OF MATERIAL REMOVAL ON THE DYNAMIC BEHAVIOR OF THIN-WALLED STRUCTURES IN PERIPHERAL MILLING

Machining is a material removal process that alters the dynamic properties during machining operations. The peripheral milling of a thin-walled structure generates vibration of the workpiece and this influences the quality of the machined surface. A reduction of tool life and spindle life can also be experienced when machining is subjected to vibration. In this paper, the linearized stability lobes theory allows us to determine critical and optimal cutting conditions for which vibration is not apparent in the milling of thin-walled workpieces. The evolution of the mechanical parameters of the cutting tool, machine tool and workpiece during the milling operation are not taken into account. The critical and optimal cutting conditions depend on dynamic properties of the workpiece. It is illustrated how the stability lobes theory is used to evaluate the variation of the dynamic properties of the thin-walled workpiece. We use both modal measurement and finite element method to establish a 3D representation of stability lobes. The 3D representation allows us to identify spindle speed values at which the variation of spindle speed is initiated to improve the surface finish of the workpiece.     

Neutronic characterization of the MEGAPIE target

The MEGAPIE project aimed to design, build and operate a liquid metal spallation neutron target of about 1 MW beam power in the SINQ facility at the Paul Scherrer Institut (Villigen, Switzerland). This project is an important step in the roadmap towards the demonstration of the accelerator driven system (ADS) concept and high power liquid metal targets in general. Following the design phase, an experimental program was defined to provide a complete characterization of the facility by performing a “mapping” of the neutron flux at different points, from the center of the target to the beam lines. The neutronic performance of the target was studied using different experimental techniques with the goals of validating the Monte Carlo codes used in the design of the target; additionally, the performance was compared with the solid lead targets used before and after the MEGAPIE experiment.     

A physical explanation of the gas flow diode effect

Gas flow properties in channels with slightly varying cross section have a dependency on the direction of channel perfusion when the gas is in the slip and transitional flow regimes. In the past, it was observed that the flow rate in converging direction is higher compared to the case where the channel diverges alongside. This gas flow diode effect does neither exist in the continuum regime nor in the free molecular regime, and it has its maximum at the same level of gaseous rarefaction as the well-known Knudsen minimum. However, no comprehensive study on the physics of this diode effect is carried out yet. In order to overcome this knowledge gap, the current paper proceeds our previous works by an appropriate experimental study. Here we can show that the diode effect crucially depends on the proportion of inclined walls to the overall channel inner surface. Also the inclination of the wall itself determines the strength of the diode effect meaning that the diodicity increases with the opening angle. Furthermore, we found indication that the diodicity also depends on the molar mass and the internal structure of the impinging gas molecules. Finally, we propose an explanation of the diode effect that is mainly based on the tangential reflection process of gas molecules colliding with the inclined walls of a tapered channel.     

Proliferative effects of synthetic peptides from β-lactoglobulin and α-lactalbumin on murine splenocytes

Eleven peptides, selected on the basis of physicochemical characteristics and their theoretical release from β-lactoglobulin (β-Lg) and α-lactalbumin (α-La) by trypsin or chymotrypsin, were chemically synthesised to evaluate their immunomodulating properties. Murine splenocyte proliferation in the absence and presence of mitogen and different peptide concentrations were measured after 72–96 h incubations. β-Lg f78–83 had no effect on proliferation; β-Lg f15–20, f55–60, f84–91, f92–105, f139–148, f142–148 and α-La f10–16 stimulated proliferation to different extents; β-Lg f1–8, f102–105 and α-La f104–108 showed a cytotoxic effect. Regression analysis revealed the relationship of positive charge, hydrophobicity and length to the stimulatory proliferative effect. β-Lg f15–20, f55–60 and f139–148 also induced various inhibiting and/or stimulating effects on cytokine secretion. The results confirm that peptides releasable by digestive enzymes from α-La and β-Lg have the potential to influence the specific immune response through the modulation of splenocyte proliferation and cytokine secretion.     

Temporal variations of radon concentration in the saturated soil of Alpine grassland: The role of groundwater flow

Radon concentration has been monitored from 1995 to 1999 in the soil of the Sur-Frêtes ridge (French Alps), covered with snow from November to April. Measurements were performed at 70 cm depth, with a sampling time of 1 h, at two points: the summit of the ridge, at an altitude of 1792 m, and the bottom of the ridge, at an altitude of 1590 m. On the summit, radon concentration shows a moderate seasonal variation, with a high value from October to April (winter), and a low value from May to September (summer). At the bottom of the ridge, a large and opposite seasonal variation is observed, with a low value in winter and a high value in summer. Fluctuations of the radon concentration seem to be associated with temperature variations, an effect which is largely delusory. Indeed, these variations are actually due to water infiltration. A simplified mixing model is used to show that, at the summit of the ridge, two effects compete in the radon response: a slow infiltration response, rich in radon, with a typical time scale of days, and a fast infiltration of radon-poor rainwater. At the bottom of the ridge, similarly, two groundwater contributions compete: one slow infiltration response, similar to the response seen at the summit, and an additional slower response, with a typical time scale of about a month. This second slower response can be interpreted as the aquifer discharge in response to snow melt. This study shows that, while caution is necessary to properly interpret the various effects, the temporal variations of the radon concentration in soil can be understood reasonably well, and appear to be a sensitive tool to study the subtle interplay of near surface transfer processes of groundwater with different transit times.     

High-resolution full-field optical coherence tomography with a Linnik microscope

We describe an original microscope for high-resolution optical coherence tomography applications. Our system is based on a Linnik interference microscope with high-numerical-aperture objectives. Lock-in detection of the interference signal is achieved in parallel on a CCD by use of a photoelastic birefringence modulator and full-field stroboscopic illumination with an infrared LED. Transverse cross-section (en-face, or XY) images can be obtained in real time with better than 1-microm axial (Z) resolution and 0.5-microm transverse (XY) resolution. A sensitivity of approximately 80 dB is reached at a 1-image/s acquisition rate, which allows tomography in scattering media such as biological tissues.