A compact model of MOSFET mismatch for circuit design

This paper presents a compact model for MOS transistor mismatch. The mismatch model uses the carrier number fluctuation theory to account for the effects of local doping fluctuations along with an accurate and compact dc MOSFET model. The resulting matching model is valid for any operation condition, from weak to strong inversion, from the linear to the saturation region, and allows the assessment of mismatch from process and geometric parameters. Experimental results from a set of transistors integrated on a 0.35 /spl mu/m technology confirm the accuracy of our mismatch model under various bias conditions.     

Failure and scaling properties of a softening interface connected to an elastic block

The damage growth in a softening interface connected to an elastic block is analysed. The elastic block, assumed to be infinite, is modelled as a two-dimensional continuum and the interface is one-dimensional with a constitutive response which follows a scalar damage model. The solution technique is based on the equilibrium of the interfacial forces resulting from the deformation of the elastic block and from the interface constitutive response. The interface failure process is compared to that of a hierarchical model which was obtained analytically (Delaplace et al., 1998). The two are found to be similar, without an internal length scaling the distribution of damage at the inception of macro-cracking. Finally, scale effects on the occurrence of bifurcation and instability are considered. It is shown that bifurcation may occur prior to or after the limit point under displacement control, depending on the elastic block height or stiffness. This revised version was published online in July 2006 with corrections to the Cover Date.     

Experimental investigation of a new type of interfacial instability in a reactive coextrusion process

This paper deals with the study of new interfacial instabilities, called “grainy” defects, in coextrusion process of reactive multilayer polymers. The main objective was to better understand this phenomenon since no help can be found in the literature. The fundamental approach from a micro‐scale to a macro‐scale involves the study of relationships between polymer structure, processing, and interfacial properties. The influence of these parameters on the generation of “grainy” defects during coextrusion has been assessed in correlation with physicochemical properties. Through this work, rheological properties and the interfacial morphology between tie and barrier layers have been investigated by shear stress relaxation experiments and transmission electronic microscopy, respectively. Depending on the reactive polymers, the interfacial coupling was found to significantly alter the stress relaxation behavior by extending the relaxation time and generating an interfacial roughness. Hence, relations between the copolymer architecture, the relaxation process, and the interfacial morphology were established in correlation with the generation of grainy defects in coextrusion process. POLYM. ENG. SCI., 55:2542–2552, 2015. © 2015 Society of Plastics Engineers     

Behaviour of CPW and TFMS lines at high temperature for RF applications in sub-45 nm nodes

Coplanar waveguide (CPW) and thin film microstrip (TFMS) lines integrating porous ultra low-k as inter-metal dielectric layers (k = 2.5) and copper as metal, are for the first time experimentally measured up to 110 GHz and under different temperature conditions, up to 200 °C. The extracted attenuation and propagation coefficients of those transmission lines are compared to simulations performed with MAGWEL software, a frequency domain 3-D Maxwell solver. Based on the characterization results some guidelines related to interconnect design are presented for future applications.     

Simulated annealing-based fitting of CAD models to point clouds of mechanical parts’ assemblies

Engineering with Computers - This paper introduces a new fitting approach to allow an efficient part-by-part reconstruction or update of editable CAD models fitting the point cloud of a digitized...     

High permittivity BaTiO3 and BaTiO3-polymer nanocomposites enabled by cold sintering with a new transient chemistry: Ba(OH)2∙8H2O

Cold sintering process (CSP) offers a promising strategy for the fabrication of innovative and advanced high permittivity dielectric nanocomposite materials. Here, we introduce Ba(OH)₂?8H₂O hydrated flux as a new transient chemistry that enables the densification of BaTiO₃ in a single step at a temperature as low as 150 °C. This remarkably low temperature is near its Curie transition of 125 °C, associated with a displacive phase transition. The cold sintered BaTiO₃ shows a relative density of 95 % and a room temperature relative permittivity over 1000. This new hydrated flux permits the fabrication of a unique dense BaTiO₃-polymer nanocomposite with a high volume fraction of ceramics ((1-x) BaTiO₃ – x PTFE, with x = 0.05). The composite exhibits a relative permittivity of approximately 800, at least an order of magnitude higher than previous reports on polymer composites with BaTiO₃ nanoparticle fillers that are typically well below 100. Unique high permittivity dielectric nanocomposites with enhanced resistivities can now be designed using polymers to engineer grain boundaries and CSP as a processing method opening up new possibilities in dielectric materials design.     

Lamin-Related Congenital Muscular Dystrophy Alters Mechanical Signaling and Skeletal Muscle Growth

Laminopathies are a clinically heterogeneous group of disorders caused by mutations in the LMNA gene, which encodes the nuclear envelope proteins lamins A and C. The most frequent diseases associated with LMNA mutations are characterized by skeletal and cardiac involvement, and include autosomal dominant Emery–Dreifuss muscular dystrophy (EDMD), limb-girdle muscular dystrophy type 1B, and LMNA-related congenital muscular dystrophy (LMNA-CMD). Although the exact pathophysiological mechanisms responsible for LMNA-CMD are not yet understood, severe contracture and muscle atrophy suggest that mutations may impair skeletal muscle growth. Using human muscle stem cells (MuSCs) carrying LMNA-CMD mutations, we observe impaired myogenic fusion with disorganized cadherin/β catenin adhesion complexes. We show that skeletal muscle from Lmna-CMD mice is unable to hypertrophy in response to functional overload, due to defective fusion of activated MuSCs, defective protein synthesis and defective remodeling of the neuromuscular junction. Moreover, stretched myotubes and overloaded muscle fibers with LMNA-CMD mutations display aberrant mechanical regulation of the yes-associated protein (YAP). We also observe defects in MuSC activation and YAP signaling in muscle biopsies from LMNA-CMD patients. These phenotypes are not recapitulated in closely related but less severe EDMD models. In conclusion, combining studies in vitro, in vivo, and patient samples, we find that LMNA-CMD mutations interfere with mechanosignaling pathways in skeletal muscle, implicating A-type lamins in the regulation of skeletal muscle growth.     

Safety Watchdog for universally safe gaseous high pressure hydrogen fillings

The fast filling time for hydrogen fuel cell vehicles makes them a user-friendly zero emission alternative to fossil fuel powered vehicles. The filling, by compressing gas into the vehicle tanks, produces heat that can be damaging. There are different protocols, standardized or the intellectual property of station operators, dedicated for different specific applications taking into account the specificity of the vessel and customer requirements. Standard protocols are developed for worst case conditions across a broad range of vehicle tank sizes and configurations. These worst case conditions do not result in the most economical equipment solution for hydrogen fueling. To ensure safety for different existing and future potential protocols a new “Safety Watchdog” approach is suggested in the current paper. This “Safety Watchdog” monitors the fueling process boundary conditions independently from the main process controls. The decoupling between the watchdog and the protocol allows use of protocols that are more economically beneficial while ensuring full safety conditions. The current paper provides a mathematical formulation of the Safety Watchdog as well as its validation versus modeling and field experimental data.     

The effect of co-encapsulation of Lactobacillus rhamnosus GG ATCC 53103 with inulin on alginate/chitosan matrix: the viability in fermented soy blend and simulated digestive system

This research verified the ability of Lactobacillus rhamnosus encapsulated with inulin to tolerate the simulated digestive system and their viability in a soy blend. Probiotic encapsulated in alginate-chitosan matrix without inulin presented a better encapsulation efficiency (80.92%) than encapsulation with inulin (57.39%). On the 28th day, the count of probiotics decreased by 3.42 and 1.99 logarithmic cycles of free and encapsulated cells without inulin, respectively. In contrast, the microorganisms encapsulated with inulin showed an increase of 1.26 logs CFU g⁻¹. During gastrointestinal simulation, cell counts decreased by 0.78, 1.55 and 1.95 CFU g⁻¹ logs for encapsulated cells without inulin, free and encapsulated with inulin, respectively. Sensory panellists liked the fermented soy blend with encapsulated lactobacilli, and this result shows the possibility to create new probiotic foods of plant origin. Therefore, the alginate/chitosan matrix can be considered adequate for the encapsulation of L. rhamnosus. The inulin reduces the encapsulation efficiency and increases the cell loss in gastrointestinal simulation. Considering cellular losses, the best option for preparing a fermented soy blend is to use L. rhamnosus encapsulated without inulin.     

Characterization of biodegradable core–clad borosilicate glass fibers with round and rectangular cross-section

Here, we report on core–clad bioactive borosilicate fibers, that we have prepared both with round and rectangular cross-section profile. The exposed approach, which relies on the stacking and drawing of glass slabs, demonstrates our ability to develop bioactive-based glass fibers with tailored cross-section profiles. Tens-of-meters-long fibers were successfully drawn, although suffering from elevated losses in the case of the rectangular ones. The response of the fibers in simulated body fluid was studied for both geometries. We found that a round cladding can act as protective layer, tempering effects of the corrosion. We also noticed that rectangular fibers are more prone to degradation, the enhanced corrosion beginning from their sharp corners as they accumulated residual tensile stress during drawing. To the best of our knowledge, this is the first report on the effect of residual tensile stresses from surface tension deformations applied to the corrosion of rectangular fibers. As geometry plays a critical role on the biodegradation behavior of the fiberglass, we believe the enclosed results could lead to the design of fiber devices with tailored cross-section profile in order to tune their rate of degradation on solely based geometrical effects.