Hard coatings on light-metal components under mechanical surface loading

In this work the behaviour of hard coated light-metal components was investigated when they are mechanically loaded. Three lightmetal alloys, Ti-6Al-4V, AlSi7Mg and AlMgSi0.5 and 100Cr6 steel (as a reference material) were coated by two different physical vapour deposition processes: radio frequency magnetron sputtering and electron beam evaporation. The coating materials utilised were CrN and TiN. Standard test methods with different loading conditions were used to evaluate the substrate/coating-combinations: the hardness test (applying a static normal load), the scratch test (applying a combination of a static normal and a static tangential force) and the impact test (applying a dynamic normal load). It was observed that the load support of coated materials depends on the loading conditions. The coated aluminium alloys showed poor load support under all loading test conditions but produced a higher surface hardness than uncoated steel. Coated Ti-6Al-4V showed very good load support properties, similar to coated steel. All coated light-metal substrates demonstrated significant improvement in load support behaviour with an increase in coating thickness. The results of the scratch test, which is commonly used to asses adhesion properties of thin coatings, showed an immediate indenter-breakthrough on the aluminium alloy substrates, but causing no coating delamination. Due to this behaviour, the scratch test is not suitable to evaluate adhesion properties on coated soft light-metals. Yet the impact test allowed assessment of coating delamination on the aluminium alloys, proving its usefulness for adhesion measurement even on soft substrates. The study indicates that substitution of steel with coated lightmetal alloys is a viable proposition for certain applications.     

Seat belt use in Ontario four years after mandating legislation

An observational survey was conducted on 11.961 vehicles in Southern Ontario to determine car driver seat belt use. Major variables included geographical location, road type. sex of driver and size of vehicle. Overall usage rate was 48.6% and was higher in the large city and higher for expressways than non-expressways. Seat belt use was inversely related to car size across all survey sites and geographical locations. Sex differences in usage rates were found to interact with variables of geographical location and road type.     

Fabrication of High-Density Homogeneous ThO2-UO2 Fuel Pellets

Thorium oxide and uranium oxide pellet fuel development activities leading to a process fohd fabrication of high density, homogeneous fuel pellets are described. Conventional dry ball-milling was used to comminute commercially available powders. After separate milling, these ThO₂-UO₂mixtures were co-milled, pressed, and sintered to 95 % of theoretical density with a homogeneous distribution of the components. An intimate mix of highly active powders promotes solid solution formation and yields high density pellets.     

An unusual case of large right atrial myxoma

A case of right atrial myxoma is described. The patient had vague and variable symptoms and it was not until five years after first presentation that she had developed clinical and electrocardiographic evidence of right atrial hypertrophy, and angiocardiographic evidence of a fist-sized myxoma which was subsequently removed surgically.     

Appearance-based face recognition and light-fields

Arguably the most important decision to be made when developing an object recognition algorithm is selecting the scene measurements or features on which to base the algorithm. In appearance-based object recognition, the features are chosen to be the pixel intensity values in an image of the object. These pixel intensities correspond directly to the radiance of light emitted from the object along certain rays in space. The set of all such radiance values over all possible rays is known as the plenoptic function or light-field. In this paper, we develop a theory of appearance-based object recognition from light-fields. This theory leads directly to an algorithm for face recognition across pose that uses as many images of the face as are available, from one upwards. All of the pixels, whichever image they come from, are treated equally and used to estimate the (eigen) light-field of the object. The eigen light-field is then used as the set of features on which to base recognition, analogously to how the pixel intensities are used in appearance-based face and object recognition.     

The significance of the North Atlantic Oscillation (NAO) for sea-salt episodes and acidification-related effects in Norwegian rivers

Acidification of Norwegian surface waters, as indicated by elevated concentrations of sulfate and a corresponding reduction in acid neutralizing capacity and pH, is a result of emission and subsequent deposition of sulfur and nitrogen compounds. Episodic sea-salt deposition during severe weather conditions may increase the effects of acidification by mobilizing more toxic aluminum during such episodes. Changes in climatic conditions may increase the frequency and strength of storms along the coast thus interacting with acidification effects on chemistry and biota. We found that the North Atlantic Oscillation (NAO) is linked to sea-salt deposition and sea-salt induced water chemistry effects in five rivers. Particularly, toxic levels of aluminum in all rivers were significantly correlated with higher NAO index values. Further, temporal trends were studied by comparing tendencies for selected statistical indices (i.e. frequency distributions) with time. The selected indices exhibited strong correlations between the NAO index, sea-salt deposition and river data such as chloride, pH and inorganic monomeric aluminum, pointing at the influence of North Atlantic climate variability on water chemistry and water toxicity. The potentially toxic effects of sea-salt deposition in rivers seem to be reduced as the acidification is reduced. This suggests that sea-salt episodes have to increase in strength in order to give the same potential negative biological effects in the future, if acid deposition is further reduced. More extreme winter precipitation events have been predicted in the northwest of Europe as a result of climate change. If this change will be associated with more severe sea-salt episodes is yet unknown.     

Aerosol lidar intercomparison in the framework of the EARLINET project. 1. Instruments

In the framework of the European Aerosol Research Lidar Network to Establish an Aerosol Climatology (EARLINET), 19 aerosol lidar systems from 11 European countries were compared. Aerosol extinction or backscatter coefficient profiles were measured by at least two systems for each comparison. Aerosol extinction coefficients were derived from Raman lidar measurements in the UV (351 or 355 nm), and aerosol backscatter profiles were calculated from pure elastic backscatter measurements at 351 or 355, 532, or 1064 nm. The results were compared for height ranges with high and low aerosol content. Some systems were additionally compared with sunphotometers and starphotometers. Predefined maximum deviations were used for quality control of the results. Lidar systems with results outside those limits could not meet the quality assurance criterion. The algorithms for deriving aerosol backscatter profiles from elastic lidar measurements were tested separately, and the results are described in Part 2 of this series of papers [Appl. Opt. 43, 977-989 (2004)]. In the end, all systems were quality assured, although some had to be modified to improve their performance. Typical deviations between aerosol backscatter profiles were 10% in the planetary boundary layer and 0.1 x 10(-6) m(-1) sr(-1) in the free troposphere.     

Dose-reducing strategies in combination offers substantial potential benefits to females requiring X-ray examination

This work, using an adult anthropomorphic phantom, aimed to establish an optimised technique for ladies of child-bearing age undergoing antero-posterior (AP) pelvis and AP and lateral lumbar spine examinations. Phase one of the work involved introducing the following dose-reducing measures individually: increased kVp, increased focus-film distances, a carbon fibre cassette, a faster film/screen combination. The second phase established an optimised technique based on a combination of the parameters listed above. Radiation dose was measured using thermoluminescent dosimeters and image quality was evaluated using anatomical criteria. All dose-reducing methods were compared with a standard technique, currently being used in a Dublin hospital. The results demonstrated that the optimised procedure reduced effective dose by 77, 62 and 66% for AP pelvis and AP and lateral lumbar spine respectively (p < 0.05) compared with the standard technique, with no significant changes in image quality. Dose-reducing measures used in combination offer substantial potential for optimisation of radiological procedures.