铝合金的大功率扩散型CO2激光粉末焊接技术

本试验研究采用２６００Ｗ扩散型（Ｓｌａｂ）ＣＯ２激光加工系统,利用喷射填充粉末激光焊接技术成功地进行了铝合金焊接;确定了试验材料激光焊接的能量阈值;通过工艺参数的优选获得了无明显焊接缺陷、正反两表面平滑连续的焊缝;焊接接头的力学性能检测表明,ＡＡ６０１６铝合金（厚度为１．１５ｍｍ）焊接接头抗拉强度不低于母材的可允许间隙可达０．５ｍｍ（母材厚度物４４％）;根据试验结果,推荐对于一定板厚的铝合金,应该     

Fabrication and characterization of two-color midwavelength/long wavelength HgCdTe infrared detectors

High-performance 20-μm unit-cell two-color detectors using an n-p⁺-n HgCdTe triple-layer heterojunction (TLHJ) device architecture grown by molecular beam epitaxy (MBE) on (211)-oriented CdZnTe substrates with midwavelength (MW) infrared and long wavelength (LW) infrared spectral bands have been demonstrated. Detectors with nominal MW and LW cut-off wavelengths of 5.5 μm and 10.5 μm, respectively, exhibit 78 K LW performance with >70 % quantum efficiency, reverse bias dark currents below 300 pA, and RA products (zero field of view, 150-mV bias) in excess of 1×10³ Ωcm². Temperature-dependent current-voltage (I–V) detector measurements show diffusion-limited LW dark current performance extending to temperatures below 70 K with good operating bias stability (150 mV ± 50 mV). These results reflect the successful implementation of MBE-grown TLHJ detector designs and the introduction of advanced photolithography techniques with inductively coupled plasma (ICP) etching to achieve high aspect ratio mesa delineation of individual detector elements with benefits to detector performance. These detector improvements complement the development of high operability large format 640×480 and 1280×720 two-color HgCdTe infrared focal plane arrays (FPAs) to support third generation forward looking infrared (FLIR) systems.     

On lowest density MDS codes

Let F_q denote the finite field GF(q) and let h be a positive integer. MDS (maximum distance separable) codes over the symbol alphabet F_q^b are considered that are linear over F _q and have sparse (“low-density”) parity-check and generator matrices over F_q that are systematic over F_q^b. Lower bounds are presented on the number of nonzero elements in any systematic parity-check or generator matrix of an F_q-linear MDS code over F_q^b, along with upper bounds on the length of any MDS code that attains those lower bounds. A construction is presented that achieves those bounds for certain redundancy values. The building block of the construction is a set of sparse nonsingular matrices over F_q whose pairwise differences are also nonsingular. Bounds and constructions are presented also for the case where the systematic condition on the parity-check and generator matrices is relaxed to be over F_q, rather than over F_q^b     

Low-voltage tunable TE/TM converter on ion-sliced lithium niobate thin film

Lift-off of a prefabricated thin-film lithium niobate device using ion slicing has been demonstrated. The device is a low-voltage electro-optically tunable TE/TM mode converter, which is fabricated on a sliced 10 /spl mu/m-thick film. A new electrode configuration allows this thin-film device low-voltage tuning of the mode conversion wavelength at 0.26 nm/V. The high tuning per volt is attributed to an improved overlap integral in the thin-film form of the device.     

Decision Support for the Comparative Evaluation and Selection of Analytical Methods: Detection of Genetically Modified Organisms as an Example

The selection of the best-fit-for-purpose analytical method to be implemented in the laboratory is difficult due to availability of multiple methods, targets, aims of detection, and different kinds and sources of more or less reliable information. Several factors, such as method performance, practicability, cost of setup, and running costs need to be considered together with personnel training when selecting the most appropriate method. The aim of our work was to prepare a flexible multicriteria decision analysis model suitable for evaluation and comparison of analytical methods used for the purpose of detecting and/or quantifying genetically modified organisms, and to use this model to evaluate a variety of changing analytical methods. Our study included selection of PCR-, isothermal-, protein-, microarray-, and next-generation sequencing-based methods in simplex and/or multiplex formats. We show that the overall result of their fitness for purpose is relatively similar; however, individual criteria or a group of related criteria exposed more substantial differences between the methods. The proposed model of this decision support system enables easy modifications and is thus suitable for any other application of complex analytical methods.     

Improved Sample Preparation for Real-Time PCR Detection of Listeria monocytogenes in Hot-Smoked Salmon using Filtering and Immunomagnetic Separation Techniques

This work evaluated the application of filtration and immunomagnetic separation (IMS) as sample pretreatments for use in combination with real-time polymerase chain reaction (PCR) to detect and quantify Listeria monocytogenes in hot-smoked salmon. Salmon was artificially inoculated with L. monocytogenes at levels ranging from 8 × 10⁰ to 8 × 10⁵ cfu/g of sample, and homogenates obtained from these samples were filtered to recover bacterial cells without a pre-enrichment step. High recovery of bacterial cells was achieved using standard coffee filters. IMS significantly reduced the co-extraction of PCR inhibitors present in the samples to increase the assay sensitivity with regression line parameters applicable for quantification. The limit of detection and quantification were equal to 2 × 10¹–4 × 10¹ and 2 × 10² cfu/g of sample, respectively. The entire detection procedure could be completed within 3.5 h. This study demonstrated that coupling filtration and IMS with real-time PCR has contributed to improve the sensitivity of L. monocytogenes detection from hot-smoked salmon.     

Morphogenesis of the spinal canal, normal and stenotic

The closest formative developmental dependence of the axial skeleton upon the morphogenesis of the intraspinal nervous structures is reflected in the roentgen features of the individual vertebrae as well as of the vertebral column in its entirety. The vertebroneural developmental events are characterized by a steady relative decrease in size of the nervous structures (the first to be laid down and huge in the embryonic period) under a corresponding increase in size of the skeletogenic tissues. There exists experimental evidence that the maintenance of the necessary developmental balance between the two tissues, the bony and the skeletogenic, is a function of the nervous substance. The tight spinal canal appears to result from a failure of the latter neural function leading to overgrowth of the bony structures, viz., to massive vertebrae and laminae encroaching upon the neural contents. Morphogenesis of the normal and tight lumbar spinal canal is discussed with special reference to the developmental interrelations between the cauda equina complex and the lumbar vertebrae.     

Comparison of the effect of carbon monoxide and of hypoxic hypoxia. I. In vivo metabolism, distribution and action of hexobarbital

1. The biosynthesis of cholesterol was studied, by using various precursors, in rats subjected to several dietary regimes. 2. The use of 3H2O as a substrate to demonstrate differences in cholesterogenesis under various conditions was validated by using rats fed on cholesterol or cholestyramine. Cholesterol feeding resulted in decreased cholesterogenesis, whereas cholestyramine caused an increase. 3. With acetate as precursor, the biosynthesis of both digitonin-precipitable sterol and fatty acids was increased in vitro in response to a meal. 4. In rats fed ad libitum, hepatic cholesterogenesis was increased at midnight relative to mid-morning as measured by using acetate precursor in vitro. However, no such difference was found by using 3H2O in vivo. 5. The lipogenic response was measured in meal-fed rats by using 3H2O or octanoate in vivo. In contrast with findings with acetate in vitro, no postprandial stimulation of cholesterogenesis was seen with either 3H2O or octanoate as precursor, whereas fatty acid biosynthesis from either substrate was increased. 6. These findings are discussed with respect to current theories about the circadian rhythm of cholesterogenesis. Such theories are based on experiments using isolated enzyme measurements or non-physiological precursors such as acetate. 7. It is considered that results obtained with 3H2O give an accurate representation of cholesterogenesis under various conditions, and it is therefore suggested that hepatic cholesterogenesis in rats is not subjected to the same degree of diurnal rhythm as has previously been believed.