Modeling the Direct Synthesis of Dimethyl Ether using Artificial Neural Networks

Artificial neural networks (ANNs) are designed and implemented to model the direct synthesis of dimethyl ether (DME) from syngas over a commercial catalyst system. The predictive power of the ANNs is assessed by comparison with the predictions of a lumped model parameterized to fit the same data used for ANN training. The ANN training converges much faster than the parameter estimation of the lumped model, and the predictions show a higher degree of accuracy under all conditions. Furthermore, the simulations show that the ANN predictions are also accurate even at some conditions beyond the validity range.     

Interfacing remote transaction services using UPnP

Transaction execution in mobile environments needs to be flexible, not only to support typical mobile computing characteristics, like movement, disconnections and limited resources, but also to support the variety of transactional properties that might be required by different applications. Existing models for mobile transaction management solve different aspects of transaction execution, but are not flexible enough to solve all required aspects. Instead of designing a new transaction model, we propose a middleware (MobileTSe) which utilize existing transaction models to handle various requirements for mobile transaction execution. This paper presents an approach for flexible transaction processing in mobile applications, and describes how MobileTSe makes transaction services with different properties available on mobile units. We suggest a solution with transaction service discovery and control using UPnP.     

Sensitivity analysis of complex embedded real-time systems

The robustness of an architecture to changes is a major concern in the design of efficient and reliable state-of-the-art embedded real-time systems. Robustness is important during design process to identify if and in how far a system can accommodate later changes or updates, or whether it can be reused in a next generation product. In the product life-cycle, robustness helps the designer to perform changes as a result of product updates, integration of new components and subsystems, or modifications of the environment. In this paper we determine robustness as a performance reserve, the slack in performance before a system fails to meet timing requirements. This is measured as design sensitivity. Due to complex component interactions, resource sharing and functional dependencies, one-dimensional sensitivity analysis might not cover all effects that modifications of one system property may have on system performance. One reason is that the variation of one property can also affect the values of other system properties requiring new approaches to keep track of simultaneous parameter changes. In this paper we present a framework for one-dimensional and multi-dimensional sensitivity analysis of real-time systems. The framework is based on compositional analysis that is scalable to large systems. The one-dimensional sensitivity analysis combines a binary search technique with a set of formal equations derived from the real-time scheduling theory. The multi-dimensional sensitivity analysis engine consists of an exact algorithm that extends the one-dimensional approach, and a stochastic algorithm based on evolutionary search techniques.     

Evalvid-RA: trace driven simulation of rate adaptive MPEG-4 VBR video

Due to the increasing deployment of conversational real-time applications like VoIP and videoconferencing, the Internet is today facing new challenges. Low end-to-end delay is a vital QoS requirement for these applications, and the best effort Internet architecture does not support this natively. The delay and packet loss statistics are directly coupled to the aggregated traffic characteristics when link utilization is close to saturation. In order to investigate the behavior and quality of such applications under heavy network load, it is therefore necessary to create genuine traffic patterns. Trace files of real compressed video and audio are text files containing the number of bytes per video and audio frame. These can serve as material to construct mathematical traffic models. They can also serve as traffic generators in network simulators since they determine the packet sizes and their time schedule. However, to inspect perceived quality, the compressed binary content is needed to ensure decoding of received media. The EvalVid streaming video tool-set enables this using a sophisticated reassembly engine. Nevertheless, there has been a lack of research solutions for rate adaptive media content. The Internet community fears a congestion collapse if the usage of non-adaptive media content continues to grow. This paper presents a solution named Evalvid-RA for the simulation of true rate adaptive video. The solution generates real rate adaptive MPEG-4 streaming traffic, using the quantizer scale for adjusting the sending rate. A feedback based VBR rate controller is used at simulation time, supporting TFRC and a proprietary congestion control system named P-AQM. Example ns-2 simulations of TFRC and P-AQM demonstrate Evalvid-RA’s capabilities in performing close-to-true rate adaptive codec operation with low complexity to enable the simulation of large networks with many adaptive media sources on a single computer.     

Solders development and application process for a micro chip-camera

Nowadays, micro components have to fulfill rising optical requirements for different scientific and industrial fields like astronomy, medicine or multimedia. For this purpose, advanced miniaturized chip-cameras are produced for the microsystems engineering market. The assembly and joining technologies play a very important role in the production of these micro components. Several challenges are associated with the joining of chip-cameras. In this study, the application of the soldering technology has been considered in order to face these challenges. Two joining technologies have been investigated: active soldering and transient liquid phase (TLP) bonding. Both soldering processes have shown a big potential for hybrid microsystems joining in previous studies. For both processes, soldering alloys and parameters have been conceived in order to fulfill the joining requirements of the micro camera components. For instance, the joining temperature represents a major challenge because the chip-camera consists of a plastic material, polymethyl methacrylate (PMMA). Therefore, particular attention has been directed to the soldering as well as to the coating temperature. The experimental investigations concerning the solders application through physical vapor deposition (PVD) have been supported by finite element method (FEM) simulations. The analysis of  the temperature distribution in the micro components during the coating process was the focus of  the calculations. Possible undesirable local overheated areas of the chip-camera components can be detected through simulation.

---

Radiotherapy of plantar heel spurs: indications, technique, clinical results at different dose concepts

BACKGROUND: In a retrospective study the efficacy of orthovoltage radiotherapy for refractory painful plantar heel spur was analyzed for 3 different radiation dose concepts. PATIENTS AND METHODS: From 1.1 1984 through 1.3.1994, 182 patients with refractory painful heel symptoms and radiologically proven plantar heel spur received radiotherapy. A total of 141 patients and 170 heels (due to double-sided symptoms) were completely documented in long-term follow-up. Clearly defined semi-quantitative criteria (9-point score) were used to analyze heel pain and ankle function prior to RT, 6 to 12 weeks post-radiation, and at last follow-up. The treatment outcome, i.e. (un)favourable response, of 3 radiation dose concepts were compared: Group A (n = 72 heels) received 12 Gy total radiation dose in 3 fractions per week and 2 series (6 x 1 Gy per series) separated by 6 weeks; group B (n = 98 heels) received 3 Gy total radiation dose in 10 fractions of 0.3 Gy (n = 50) or 5 Gy (10 x 0.5 Gy) (n = 48) with conventional fractionation in 1 series. RESULTS: Radiotherapy was very effective: at last follow-up 67% (group A) and 71% (group B) remained completely free of pain. The rate of "complete pain relief" (i.e. free of any pain symptoms) was not different between the 3 radiation concepts. However, significant differences were observed with regard to "incomplete or insufficient pain relief", i.e. a subjective pain relief of less than 80%, a delayed pain relief after more than 4 weeks or a relapse of pain symptoms in long-term follow-up. More favourable results were achieved in patients receiving 5 Gy or 12 Gy total dose, while patients with 3 Gy total dose had significantly worse results. Prognostic factors for "complete pain relief" were short duration of pain symptoms and acute pain symptoms prior to radiotherapy; with regard to "in-complete or insufficient pain relief" the total dose was found to be a prognostic parameter. CONCLUSIONS: Patients with refractory heel pain can yield a high response to radiotherapy even after failing various conventional treatments previously. Thus, radiotherapy should not be solely regarded as a last resort due to its low costs and high efficacy at low radiation doses.     

The influence of design aesthetics in usability testing: Effects on user performance and perceived usability

This article examined the effects of product aesthetics on several outcome variables in usability tests. Employing a computer simulation of a mobile phone, 60 adolescents (14-17 yrs) were asked to complete a number of typical tasks of mobile phone users. Two functionally identical mobile phones were manipulated with regard to their visual appearance (highly appealing vs not appealing) to determine the influence of appearance on perceived usability, performance measures and perceived attractiveness. The results showed that participants using the highly appealing phone rated their appliance as being more usable than participants operating the unappealing model. Furthermore, the visual appearance of the phone had a positive effect on performance, leading to reduced task completion times for the attractive model. The study discusses the implications for the use of adolescents in ergonomic research.     

The influence of user expertise and prototype fidelity in usability tests

An empirical study examined the impact of user expertise and prototype fidelity on the outcomes of a usability test. User expertise (expert vs. novice) and prototype fidelity (paper prototype, 3D mock-up, and fully operational appliance) were manipulated as independent variables in a 2 × 3 between-subjects design. Employing a floor scrubber as a model product, 48 users carried out several cleaning tasks. Usability problems identified by participants were recorded. Furthermore, performance, system management strategies and perceived usability were measured. The results showed that experts reported more usability problems than novices but these were considered to be less severe than those reported by novices. Reduced fidelity prototypes were generally suitable to predict product usability of the real appliance. The implications for the running of usability tests are specific to the fidelity of the prototype.     

Comparative study of three training methods for enhancing process control performance: Emphasis shift training,situation awareness training,and drill and practice

Three training methods to improve attention management skills in process control were compared. Forty students from technical disciplines participated in a five-hour module of emphasis shift training (EST), EST combined with situation awareness training (EST/SA), and drill and practice (D&P) on a simulated process control task. Participants were then tested three times for 45 min each (immediately after training, two weeks after training, and six weeks after training) for system control performance and diagnostic performance on familiar and nonfamiliar fault states. D&P led to superior diagnostic performance on familiar system faults. EST/SA training supported the diagnosis of novel system faults. EST was less effective than expected for system control performance. Implications for training design in process control are discussed.     

TORC: test plan optimization by requirements clustering

Acceptance testing is a time-consuming task for complex software systems that have to fulfill a large number of requirements. To reduce this effort, we have developed a widely automated method for deriving test plans from requirements that are expressed in natural language. It consists of three stages: annotation, clustering, and test plan specification. The general idea is to exploit redundancies and implicit relationships in requirements specifications. Multi-viewpoint techniques based on RM-ODP (Reference Model for Open Distributed Processing) are employed for specifying the requirements. We then use linguistic analysis techniques, requirements clustering algorithms, and pattern-based requirements collection to reduce the total effort of testing against the requirements specification. In particular, we use linguistic analysis for extracting and annotating the actor, process and object of a requirements statement. During clustering, a similarity function is computed as a measure for the overlap of requirements. In the test plan specification stage, our approach provides capabilities for semi-automatically deriving test plans and acceptance criteria from the clustered informal textual requirements. Two patterns are applied to compute a suitable order of test activities. The generated test plans consist of a sequence of test steps and asserts that are executed or checked in the given order. We also present the supporting prototype tool TORC, which is available open source. For the evaluation of the approach, we have conducted a case study in the field of acceptance testing of a national electronic identification system. In summary, we report on lessons learned how linguistic analysis and clustering techniques can help testers in understanding the relations between requirements and for improving test planning.