Influence of compounding conditions,treatment of wood particles with fire-retardants and artificial weathering on properties of wood-polymer composites for façade applications

European Journal of Wood and Wood Products - Various fire-retardants (FR) for the pre-treatment of wood flour, for example, ammonium polyphosphate and different formulations based on phosphorus-...     

Characterization of Ceramic Foam Filters Used for Liquid Metal Filtration

In the current study, the morphology including tortuosity, and the permeability of 50-mm thick commercially available 30, 40, 50, and 80 pores per inch (PPI) alumina ceramic foam filters (CFFs) have been investigated. Measurements have been taken of cell (pore), window, and strut sizes, porosity, tortuosity, and liquid permeability. Water velocities from ~0.015 to 0.77 m/s have been used to derive both first-order (Darcy) and second-order (Non-Darcy) terms for being used with the Forchheimer equation. Measurements were made using 49-mm “straight through” and 101-mm diameter “expanding flow field” designs. Results from the two designs are compared with calculations made using COMSOL 4.2a^® 2D axial symmetric finite element modeling (FEM), as a function of velocity and filter PPI. Permeability results are correlated using directly measurable parameters and compared with the previously published results. Development of improved wall sealing (49 mm) and elimination of wall effects (101 mm) have led to a high level of agreement between experimental, analytic, and FEM methods (±0 to 7 pct on predicted pressure drop) for both types of experiments. Tortuosity has been determined by two inductive methods, one using cold-solidified samples at 60 kHz and the other using liquid metal at 50 Hz, giving comparable results.     

Sintering,microwave properties,and circulator applications of textured Sc-substituted M-type ferrite thick films

Sc³⁺ substituted M-type ferrites are effective microwave magnetic materials with a ferromagnetic resonance frequency in the range of 20 GHz–50 GHz. We report on the fabrication of oriented ferrite thick films as microwave components for application in the K_a-band at 30 GHz. Films of BaFe_11.5.Sc_0.5O₁₉ were prepared by screen-printing on alumina substrates, drying in an external magnetic field, and sintering at 900 °C. Low-temperature sintering is achieved through use of a mixed BBSZ/CuO sintering aid. A strong anisotropy of the sintered ferrite films is revealed by XRD analysis. Microwave properties of the films were determined in a coplanar waveguide setup. The ferromagnetic resonance frequency of the films is at 30 GHz and the textured films possess good nonreciprocal properties which scale with film thickness. The films were tested in a Y-junction circulator, and represent promising materials for self-biased microwave components fabricated in thick film technology.     

Spectrally selective and adaptive surfaces for protection against radiative heating: ITO and VO2

Two surface materials for reducing absorptivity of heat radiation from fires have been investigated. The first is VO₂, which is a thermochromic material. When the temperature of a VO₂ surface increases over a certain temperature, it switches, ideally, from infrared (IR)‐absorbing to IR‐reflecting. VO₂ window coatings are still on a research level, yet to be commercialized. In this study, VO₂ powder available on the market was investigated. The thermochromic effect could be identified but was not large enough to significantly improve the fire properties of treated surfaces. Some thoughts concerning how to improve the performance of VO₂ are discussed. The second investigated material is indium tin oxide (ITO), which is a so called low‐e coating, which means that it has low emissivity and absorptivity in the IR part of the spectrum. ITO is spectrally selective in the sense that it transmits visible light while reflecting a large fraction of the IR radiation, which is a rare property for surfaces in general but a typical property of thin electrically conducting non‐metallic films. It is shown that the application of ITO to poly(methyl methacrylate) (PMMA) significantly improves its fire properties. ITO coating is a mature technology already in widespread use today in the electronics industry. Copyright © 2012 John Wiley & Sons, Ltd.