Antitumor Effects of Vitamin D Analogs on Hamster and Mouse Melanoma Cell Lines in Relation to Melanin Pigmentation

Deregulated melanogenesis is involved in melanomagenesis and melanoma progression and resistance to therapy. Vitamin D analogs have anti-melanoma activity. While the hypercalcaemic effect of the active form of Vitamin D (1,25(OH)₂D₃) limits its therapeutic use, novel Vitamin D analogs with a modified side chain demonstrate low calcaemic activity. We therefore examined the effect of secosteroidal analogs, both classic (1,25(OH)₂D₃ and 25(OH)D₃), and novel relatively non-calcemic ones (20(OH)D₃, calcipotriol, 21(OH)pD, pD and 20(OH)pL), on proliferation, colony formation in monolayer and soft-agar, and mRNA and protein expression by melanoma cells. Murine B16-F10 and hamster Bomirski Ab cell lines were shown to be effective models to study how melanogenesis affects anti-melanoma treatment. Novel Vitamin D analogs with a short side-chain and lumisterol-like 20(OH)pL efficiently inhibited rodent melanoma growth. Moderate pigmentation sensitized rodent melanoma cells towards Vitamin D analogs, and altered expression of key genes involved in Vitamin D signaling, which was opposite to the effect on heavily pigmented cells. Interestingly, melanogenesis inhibited ligand-induced Vitamin D receptor translocation and ligand-induced expression of VDR and CYP24A1 genes. These findings indicate that melanogenesis can affect the anti-melanoma activity of Vitamin D analogs in a complex manner.     

Deposition of calcium hydroxyapatite on negatively charged polyphosphazene surfaces

A number of polyphosphazenes with negatively charged β‐alanine (β‐Ala) and γ‐amino butyric acid (GABA) side groups were synthesized and studied for their ability to initiate the growth of hydroxyapatite (HAp) during exposure to simulated body fluid (SBF). All the polymers were hydrolytically sensitive, with the final hydrolysis rate dependent on the specific active side groups (GABA > β‐Ala). These systems also underwent extensive mineralization, with calcium phosphate deposited across their entire surface during exposure to SBF (up to 115 wt % gain after 4 weeks). This degree of deposition is a major advance over previously reported polyphosphazene systems, which underwent a maximum of 27 wt % gain after immersion in SBF for 4 weeks. The extent of mineralization over the surface was monitored using environmental scanning electron microscopy (ESEM) coupled with energy dispersive X‐ray spectroscopy (EDS). In addition, X‐ray diffraction (XRD) was used to determine the identity of the mineralized material. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41741.     

The Impact of Linseed Oil Lipids on the Physical Properties of Corn Crisps and the Possibility of Obtaining Crisps Enriched with n‐3 Fatty Acids

Linseed oil, also known as flaxseed oil, is obtained from the dried, ripened seeds of the flax plant (Linum usitatissimum). The oil is obtained by pressing, sometimes followed by solvent extraction supported by a refining process. Linseed oil is an edible oil that is in demand as a nutritional supplement, as a source of α‐linolenic acid an n‐3 fatty acid. The aim of this work was to investigate: (1) the influence of the corn crisp extrusion process on the degradation of fatty acids in linseed oil (LO) and some preparations obtained from the linseed oil such as ethyl ester (EE) and free fatty acids (FFA) added to the corn in order to increase the nutritional value of the crisps, (2) influence of the oil and two fatty preparations obtained from it on the quality of corn crisps, (3) interaction of the lipid fraction with starch. The extrusion process did not degrade the fatty acids significantly. Expansion ratio obtained in the corn crisp extrusion process decreased from 620 % down to 153 %, the size of pores/thickness of the starch–protein walls forming the structure of the extruded product decreased from 10 μm down to 4 μm, the hardness of the crisps increased from 20 to 75 N, and number of lipid–starch complexes increased with rising polarity of the lipid fraction. FFA were complexed mostly by starch (about 90 %), to a lesser degree by EE (about 60 %) and to the least extent by triacylglycerols (about 10 %). The studies performed under industrial conditions using the single screw extruder for the production of corn crisps with the application of standard parameters of the extrusion process indicated that the addition of a mass of 5 % of the various lipids (triacylglycerols of linseed oil, ethyl esters and fatty acids obtained from linseed oil) to corn grits prior to the extrusion process significantly affect the quality of corn crisps.     

The improvement of ecological characteristics of coatings from cured epoxy resins by hot water extraction

Amine curing agents pose serious health hazards and controlling their release is crucially important. Extraction of unbounded amine from cured epoxy polymers can improve the ecological characteristics of such products. Even 1 min exposure of cured epoxy resins to hot water reduces three- to ten-fold the residual amount of amine present in the epoxy polymer. Different temperatures and extraction times were tested, enabling the selection of the most optimal extraction conditions, which correspond to 5 min of heating in 100°C. This additional cost-effective extraction step is very easy to perform and leads to a significant reduction of unbounded curing agent, making cured epoxy resins much more eco-friendly products. The documented positive and linear trends of logarithms of viscosity and the amount of released amine suggest the selection from such curing agents and such epoxy resins that are characterized by lowest possible viscosities, which guarantees that there is only a low amount of unbounded amine that needs to be released from the polymer.     

Development of composite membrane PBAT: Zeolite Y for application as rhynchophorol release system

Composite membranes consisting of biodegradable poly(butylene adipate‐co‐terephthalate (PBAT) and zeolite Y (0–10 wt %) were produced by extrusion. Zeolite Y is well dispersed in the membrane up to 5 wt %, but tends to agglomerate at higher contents. The presence of zeolite Y in the composite resulted in an improvement of the thermal stability, mechanical properties, and increased the barrier properties. The interaction of the composite membranes with rhynchophorol was investigated by different techniques, showing that the semiochemical progressively lixiviates PBAT monomers, causing thermal and mechanical properties to decrease. However, no interaction seemed to occur between the rhynchophorol and the zeolite. Studies of diffusion of pheromone through membranes have shown that the addition of the zeolite Y has not contributed significantly to a decrease in the release rate of rhynchophorol, but the presence of the zeolite Y helps to increase chemical, mechanical, and thermal stabilities of the membranes. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45757.     

DNA interaction of the CcrM DNA methyltransferase: a mutational and modeling study

Caulobacter crescentus CcrM is a DNA-(adenine N6)-methyltransferase that methylates adenine in the sequence GANTC with high specificity. To investigate its mechanism of DNA recognition, we used the crystal structure of a related methyltransferase (M1.MboII, which modifies GAAGA) as a starting point, and docked into it a DNA substrate to identify the protein regions that approach the DNA. After alignment of CcrM and M1.MboII, we identified four candidate regions in CcrM to contain residues involved in DNA recognition. We mutated 20 amino acid residues within these regions, purified the CcrM variants, and determined their DNA-binding and catalytic activity on a cognate GANTC substrate and on nine near-cognate substrates, each of which contained a single base-pair substitution in the recognition sequence. Altogether, we identified four residues in two of the regions, mutations of which resulted in a strong (>100-fold) reduction of methylation activity. Our data show that DNA recognition by CcrM is a cooperative process, because disruption of critical contacts led to loss of catalytic activity but not to a relaxation in specificity. In addition, we identified a change in the readout of the fifth base pair in the GANTC sequence with two other CcrM variants that showed smaller reductions in overall activity. Based on this and the sequence alignment of CcrM with other DNA methyltransferases of same or related recognition sequence, we propose roles for these two regions in DNA recognition by CcrM.     

Synthesis of Benzophenones and in vitro Evaluation of Their Anticancer Potential in Breast and Prostate Cancer Cells

Breast and prostate cancers are frequently treated with chemotherapy. Several novel chemicals are being reported for this purpose, particularly synthetic and natural benzophenones. This work reports the synthesis of substituted 2-hydroxybenzophenones through 1,4-conjugate addition/intramolecular cycloaddition/dehydration of nitromethane on key intermediate chromones. Structures were extensively studied by means of 2D NMR spectroscopy and single-crystal XRD. Their cytotoxicity was evaluated in vitro in two breast cancer cell lines (MDA-MB-231 and T47-D) and one prostate cancer cell line (PC3). The most potent compound exhibited good cytotoxic effects against the three cancer cell lines (IC₅₀ values ranging from 12.09 to 26.49 μm ) and induced cell-cycle retardation only on prostate cancer cells, which suggested that it might exert cell-type-specific effects.     

Interfacial reactions of Sn–Zn–Ag–Cu alloy on soldered Al/Cu and Al/Al joints

This work shows the effect on the soldering process of the addition of Ag and Cu to Sn–Zn alloys. Soldering of Al/Cu and Al/Al joints was performed for a time of 3?min, at a temperature of 250°C, with the use of flux. Aging was carried out at 170°C for Al/Cu and Al/Al joints for 1 and 10 days. During the aging process, intermetallic layers grew at the interface of the Al/Cu joint at the Cu substrate. Intermetallic layers were not observed during wetting of Al/Al joints. On the contrary, dissolution of the Al substrate and migration of Al-rich particles into the bulk of the solder were observed. The experiment was designed to demonstrate the effect of Ag and Cu addition on the dissolution of Al substrate during the soldering and aging processes. In the solder alloys, small precipitates of AgZn₃ and Cu₅Zn₈ were observed.     

Spectral studies of zinc octacarboxyphthalocyanine aggregation

The association of zinc octacarboxyphthalocyanine, was studied using UV–vis absorption and fluorescence emission spectroscopy; the effects of dye concentration, pH and solvents on spectra were discussed. Calculations showed that the dye dimerized in aqueous solutions ranging from 5.0 × 10^?7 to 5.0 × 10^?5 mol/dm³, at 25 °C. The dimerization constant of 10⁶ dm³/mol and the spectral Q band shift of 1185 cm^?1 imparted by dimerization indicated strong π–π interactions between phthalocyanine molecules. Red S₁ fluorescence of the dye monomer was observed in various solutions which was quenched owing to molecular association and other factors. The strong influence of pH on both aggregation and fluorescence was discussed. At pH < 5.0, only dye aggregates were present in solution; monomers appeared at pH ≥ 5.0 and, in alkaline solution, only the monomeric anions of phthalocyanine existed. The spectral absorption and emission data for the dye in binary solvents revealed that at concentrations ranging from 0.5 × 10^?5 to 1.0 × 10^?5 mol/dm³, the dye can be used in photosensitised oxidation reactions.     

Bimetallic Au–Cu, Ag–Cu/CrAl3O6 Catalysts for Methanol Synthesis

The influence of silver and gold addition on the activity and physicochemical properties of supported Cu/CrAl₃O₆ catalysts was the aim of this work. The reduction of CrAl₃O₆ support shows only one reduction stage attributed to Cr (VI) species reduction originating from previously oxidized binary oxide. Supported copper catalysts reduce in one or two stages depending on copper concentration representing the reduction of copper oxide—CuO, copper oxide chemically combined with Cr(III) oxide as copper chromite—CuCr₂O₄ and Cr(VI) species originating from surface chromate ions CrO₄ ^2?. Additionally, the introduction of silver into supported copper catalysts Cu/CrAl₃O₆ can led to the appearance of silver chromate phase. XRD investigations of support CrAl₃O₆ alone, supported copper and gold and silver promoted copper supported catalysts calcined at 400, 700 and 900 °C indicated the presence of highly amorphous alumina γ-Al₂O₃ like structure network in which some of cationic locations of aluminum were occupied by chromium atoms and small quantities of α-Cr₂O₃ phase. Additionally, for copper, silver–copper, and gold–copper supported catalysts the following oxide phases were distinguished: monometallic oxides CuO, Ag₂O, binary oxides CuAl₂O₄, Ag₂CrO₄, CuCr₂O₄ and even ternary oxide CuAlCrO₄. In the case of gold promoted copper supported catalysts metallic gold phase was detected. Activity tests carried out for these catalysts show that the most active was 20 wt.% Cu/CrAl₃O₆ catalyst. Promotion of copper catalysts by silver improves the activity in methanol synthesis, what can be assigned to silver chromate formation. The analogical gold chromate like formation was not confirmed.