Soldering of Mg Joints Using Zn-Al Solders

Magnesium has applications in the automotive and aerospace industries that can significantly contribute to greater fuel economy and environmental conservation. The Mg alloys used in the automotive industry could reduce mass by up to 70 pct, providing energy savings. However, alongside the advantages there are limitations and technological barriers to use Mg alloys. One of the advantages concerns phenomena occurring at the interface when joining materials investigated in this study, in regard to the effect of temperature and soldering time for pure Mg joints. Eutectic Zn-Al and Zn-Al alloys with 0.05 (wt pct) Li and 0.2 (wt pct) Na were used in the soldering process. The process was performed for 3, 5, and 8 minutes of contact, at temperatures of 425 °C, 450 °C, 475 °C, and 500 °C. Selected, solidified solder-substrate couples were cross-sectioned, and their interfacial microstructures were investigated by scanning electron microscopy. The experiment was designed to demonstrate the effect of time, temperature, and the addition of Li and Na on the kinetics of the dissolving Mg substrate. The addition of Li and Na to eutectic Zn-Al caused to improve mechanical properties. Higher temperatures led to reduced joint strength, which is caused by increased interfacial reaction.     

Interfacial Phenomena in Al/Al,Al/Cu,and Cu/Cu Joints Soldered Using an Al-Zn Alloy with Ag or Cu Additions

The studies of soldered joints were carried out in systems: Al/solder/Al, Al/solder/Cu, Cu/solder/Cu, where the solder was (Al-Zn)_EUT, (Al-Zn)_EUT with 0.5, 1.0, and 1.5 at.% of Ag and (Al-Zn)_EUT with 0.5, 1.0, and 1.5 at.% of Cu addition. Brazing was performed at 500 °C for 3 min. The EDS analysis indicated that the composition of the layers starting from the Cu pad was CuZn, Cu5Zn8, and CuZn4, respectively. Wetting tests were performed at 500 °C for 3, 8, 15, and 30 min, respectively. Thickness of the layers and their kinetics of growth were measured based on the SEM micrographs. The formation of interlayers was not observed from the side of Al pads. On the contrary, dissolution of the Al substrate and migration of Al-rich particles into the bulk of the solder were observed.     

Categorization of ambient media projects on their business models, innovativeness, and characteristics—evaluation of Nokia Ubimedia MindTrek Award Projects of 2010

Ambient Media describe media environments, where the medium is embedded within the natural environment. They follow the anytime, anywhere, and anyhow principle for media access. The Nokia Ubimedia MindTreks Awards have been established a few years ago to explore the potential of ambient media. In this article we analyze the total project portfolio submitted to the 4th Nokia Ubimedia MindTrek Awards in 2010 according to their business value, innovativeness, and use of ambient media. The aim of this article is to gain insights into the general characteristics of ambient media, their properties, and business functions. The article rounds up in providing a substantial framework and guidelines for ambient media developers in their product designs.     

Proteomic Analysis of Embryogenesis and the Acquisition of Seed Dormancy in Norway Maple (Acer platanoides L.)

The proteome of zygotic embryos of Acer platanoides L. was analyzed via high-resolution 2D-SDS-PAGE and MS/MS in order to: (1) identify significant physiological processes associated with embryo development; and (2) identify changes in the proteome of the embryo associated with the acquisition of seed dormancy. Seventeen spots were identified as associated with morphogenesis at 10 to 13 weeks after flowering (WAF). Thirty-three spots were associated with maturation of the embryo at 14 to 22 WAF. The greatest changes in protein abundance occurred at 22 WAF, when seeds become fully mature. Overall, the stage of morphogenesis was characterized by changes in the abundance of proteins (tubulins and actin) associated with the growth and development of the embryo. Enzymes related to energy supply were especially elevated, most likely due to the energy demand associated with rapid growth and cell division. The stage of maturation is crucial to the establishment of seed dormancy and is associated with a higher abundance of proteins involved in genetic information processing, energy and carbon metabolism and cellular and antioxidant processes. Results indicated that a glycine-rich RNA-binding protein and proteasome proteins may be directly involved in dormancy acquisition control, and future studies are warranted to verify this association.     

Design of whey protein nanostructures for incorporation and release of nutraceutical compounds in food

Whey proteins are widely used as nutritional and functional ingredients in formulated foods because they are relatively inexpensive, generally recognized as safe (GRAS) ingredient, and possess important biological, physical, and chemical functionalities. Denaturation and aggregation behavior of these proteins is of particular relevance toward manufacture of novel nanostructures with a number of potential uses. When these processes are properly engineered and controlled, whey proteins may be formed into nanohydrogels, nanofibrils, or nanotubes and be used as carrier of bioactive compounds. This review intends to discuss the latest understandings of nanoscale phenomena of whey protein denaturation and aggregation that may contribute for the design of protein nanostructures. Whey protein aggregation and gelation pathways under different processing and environmental conditions such as microwave heating, high voltage, and moderate electrical fields, high pressure, temperature, pH, and ionic strength were critically assessed. Moreover, several potential applications of nanohydrogels, nanofibrils, and nanotubes for controlled release of nutraceutical compounds (e.g. probiotics, vitamins, antioxidants, and peptides) were also included. Controlling the size of protein networks at nanoscale through application of different processing and environmental conditions can open perspectives for development of nanostructures with new or improved functionalities for incorporation and release of nutraceuticals in food matrices.     

Thermal Expansion,Electrical Resistivity,and Spreading Area of Sn-Zn-In Alloys

Thermal expansion and electrical resistivity of alloys based on Sn-Zn eutectic with 0.5, 1.0, 1.5, and 4.0 wt.% additions of In were studied. Thermal expansion measurements were performed using thermomechanical analysis tester over 223-373 K temperature range. Electrical resistivity measurements were performed with four-probe method over 298-423 K temperature range. The electrical resistivity of alloys increases linearly with temperature and concentration of In; also coefficient of thermal expansion of the studied alloys increases with In concentration. Scanning electron microscopy revealed simple eutectic microstructure with In dissolved in Sn-rich matrix. The results obtained were compared with the available literature data. Spreading tests on Cu of Sn-8.8Zn alloys with 0.5, 1.0, and 1.5 at.% of In were performed. Wetting tests were performed at 250 °C, by sessile drop method, by means of flux, and wetting times were 3, 8, 15, 30, and 60 min. In general, no clear effect of wetting time on spreading was observed.     

Innovative method of Transthoracic Lung Cancer Biopsy of Parietal Lung Tumors under US Guidance after CT Pre-biopsy Planning as an Alternative to CT- Guided Biopsy

The authors compared their earlier results of the tumor biopsies performed under computer tomography （CT） guidance against the results of their recently modified-combined method of visualization and measurement of lung tumor parameters by CT imaging followed by US guided biopsy. In 238 （6.36%） of 3,745 patients in CT examination, the lung tumor was located peripherally, and obtaining histopathological confirmation was crucial to start the proper treatment. The patients were divided into two groups, the division was based on the biopsy method. Within the first group in I 18 patients, parietal lung tumor was confirmed and CT guided biopsy was performed. Within the second group, parietal lung tumor was confirmed in 120 patients and combined method of CT pre- biopsy planning and US guided biopsy were used. Pre-biopsy planning was performed using CT, measurements such as depth and distance of the tumor were made, obtained data were then saved on CT image and patient＇s skin was marked. Then obtained results were analyzed using test for two proportions. The analysis of the results confirmed the higher efficacy of the combined method taking into account the number of complications （p 〈 0.01） and diagnostic histopathological results （P 〈 0.001）. Suggested innovative method, involving both CT pre-biopsy planning and US guided biopsy, allows to analyze simultaneously static CT and dynamic US images and it is considered to be an easy and effective method comparing to relying on static in nature CT images only. Our method is related to a lower complication risk rate.     

Surface layer condition and the fatigue strength of an AZ91 alloy after ball peening

The present work compares the states of the surface textures and the oscillatory fatigue strengths of specimens made of an AZ91 alloy after turning and dynamic bearing ball peening. It was found that the specimens ball peened at different time have similar surface geometric structure parameters but different strengthening intensity. It was shown that fatigue strength follows greater peening intensity and random and isotropic surface. It was also ascertained that improving (by peening) the condition of the surface layer means enhancing fatigue strength by 20–87% compared with turning.