Microstructural, tribological and electrochemical corrosion studies on reactive DC magnetron sputtered zirconium nitride films with Zr interlayer on steel

Thin films of Zirconium Nitride (ZrN) were deposited by DC magnetron sputtering. The structure of the films was examined by X-ray diffraction and the crystallographic parameters were refined by Rietveld analysis. The columnar micro-structure was observed via cross-sectional SEM analysis. Defect induced, first order spectra were observed from Laser Raman studies. XPS showed the presence of Zr (N,O) ZrO₂ phases on the surface of the film. The pitting corrosion was substantially reduced by the employment of Zr film as an interlayer. Corrosion tests revealed that ZrN films with a Zr interlayer exhibited clear passivation characteristics with considerably better corrosion resistance than the film without an interlayer.     

Corrosion of carbon steel feeders during dilute chemical decontamination of primary heat transport system of PHWRs

Carbon steel feeders in the primary heat transport system of pressurized heavy water reactors (PHWRs) show significant wall thinning due to flow accelerated corrosion (FAC). This is of great concern, as the wear rate in certain locations exceeds the corrosion allowance by design. This necessitates periodic measurement of wall thickness and in some cases even mid course enmasse replacement of feeders. While analyzing the data on wall thicknesses and in arriving at the wall thinning rate during operation of the reactor, sufficient care has to be taken to account for the wall thinning occurring during full system chemical decontamination campaign which is carried out occasionally to reduce dose rates during reactor shut down. Chemical decontamination of primary heat transport system is carried out using a mixture of organic acids at a total concentration of about 0.1 g/L and at 85 °C. The results of experiments carried out under simulated conditions for estimating the wall thinning occurring in carbon steel feeder elbow during dilute chemical decontamination are described in this work. The corrosion rates are quantified.     

Nanoenergetic Composites of CuO Nanorods,Nanowires, and Al‐Nanoparticles

This paper reports on the synthesis of the nanoenergetic composites containing CuO nanorods and nanowires, and Al‐nanoparticles. Nanorods and nanowires were synthesized using poly(ethylene glycol) templating method and combined with Al‐nanoparticles using ultrasonic mixing and self‐assembly methods. Poly(4‐vinylpyridine) was used for the self‐assembly of Al‐nanoparticles around the nanorods. At the optimized values of equivalence ratio, sonication time, and Al‐particle size, the combustion wave speed of 1650 m s⁻¹ was obtained for the nanorods‐based energetics. For the composite of nanowires and Al‐nanoparticles the speed was increased to 1900 m s⁻¹. The maximum combustion wave speed of 2400 m s⁻¹ was achieved for the self‐assembled composite, which is the highest known so far among the nanoenergetic materials. It is possible that in the self‐assembled composites, the interfacial contact between the oxidizer and fuel is higher and resistance to overall diffusional process is lower, thus enhancing the performance.     

Role of Zinc (Zn) in Human Reproduction: A Journey from Initial Spermatogenesis to Childbirth

Zinc (Zn), the second-most necessary trace element, is abundant in the human body. The human body lacks the capacity to store Zn; hence, the dietary intake of Zn is essential for various functions and metabolism. The uptake of Zn during its transport through the body is important for proper development of the three major accessory sex glands: the testis, epididymis, and prostate. It plays key roles in the initial stages of germ cell development and spermatogenesis, sperm cell development and maturation, ejaculation, liquefaction, the binding of spermatozoa and prostasomes, capacitation, and fertilization. The prostate releases more Zn into the seminal plasma during ejaculation, and it plays a significant role in sperm release and motility. During the maternal, labor, perinatal, and neonatal periods, the part of Zn is vital. The average dietary intake of Zn is in the range of 8–12 mg/day in developing countries during the maternal period. Globally, the dietary intake of Zn varies for pregnant and lactating mothers, but the average Zn intake is in the range of 9.6–11.2 mg/day. The absence of Zn and the consequences of this have been discussed using critical evidence. The events and functions of Zn related to successful fertilization have been summarized in detail. Briefly, our current review emphasizes the role of Zn at each stage of human reproduction, from the spermatogenesis process to childbirth. The role of Zn and its supplementation in in vitro fertilization (IVF) opens opportunities for future studies on reproductive biology.     

Amorphous Cobalt-Boron Alloy Electrodeposition and Dissolution

Co-B alloy has been deposited on steel from an alkaline citrate bath. Uniform deposits have been obtained in the current density range of 8–15 Adm ^?2.Cvclic voltammetric studies on platinum from this bath reveal that the cobalt citrate complexes undergo stepwise electronation with the participation of hydroxyl ions. The borates undergo reduction to boron in the alloy deposition. The hydrogen evolution reaction has been found to be hindered by cobalt and borate ions. Stripping voltammetric curves on the alloy film suggest the dissolution of cobalt from a cobalt rich phase.     

Evaluation of surfactant-aided degumming of vegetable oils by membrane technology

The first step in the process of vegetable oil refining is degumming, in which phospholipids and mucilaginous gums are removed that otherwise result in a low-grade oil. A membrane process is remarkably simple yet potentially offers many advantages in degumming. Studies were conducted on surfactant-aided membrane degumming with soybean and rapeseed oils in a magnetically stirred flat membrane batch cell with different types of microfiltration membranes. The reduction of phospholipids in soybean oil was in the range of 85.8–92.8% during the membrane process. The phosphorus content of membrane permeates of soybean oil was in the range of 20–58 mg/kg. Crude rapeseed oil contained higher amount of nonhydratable phospholipids and hence resulted in lower reduction in phospholipids, in the range of 66.4–83.2%. Addition of hydratable phospholipids could improve the efficiency of degumming in the membrane process without using any electrolyte, resulting in improvement of quality as well as quantity of the phospholipids.     

Economics of solar air pre-heating in south Indian tea factories: a case study

Tea processing is an energy intensive operation requiring both thermal and electrical energy. Hot air at a temperature of 100–130°C for tea drying and withering has been obtained in the past by burning coal or firewood. Over the last four years, roof integrated solar air heating systems have been introduced in some of the tea factories of south India, as a partial energy source. This paper aims to present the economical analysis of one such system: a 212 m² collector area system that has been in operation for 2.75 yr. The system has reduced specific fuel consumption for tea production from 0.932 to 0.71 kg/kg dmt (drier mouth tea), which represents a fuel savings of approximately 25%. The economic analysis considered the annual investment cost and return cost and included concessions offered by the Government. It shows a payback period of from two to four years, depending upon whether the company is profit making or non-profit making. This work has helped to establish the economic viability of this method.     

Effect of heat treatment on electron traps in n-type GaAs

Annealing of bulk and vapor phase epitaxial (VPE) n-type GaAs at about 600°C for one hour in an apparatus of fused quartz (GE 204 or vitrosil) is seen to cause considerable reduction in the free electron concentration (N_S) and the commonly observed 0.85 eV electron traps (N_T) in these materials. Heating at elevated temperatures in the same environment causes an n-type sample to convert to p-type. The reduction in N_S and N_T is found to be considerably smaller for comparable heat treatments in a vacuum system free from quartz. It is suggested that the observed reduction is caused by in-diffusion of impurities like Cu and Li which are present in the types of quartz used in the experiments.