Tuning exchange bias in core/shell FeO/Fe3O4 nanoparticles

Monodisperse 35 nm FeO nanoparticles (NPs) were synthesized and oxidized in a dry air atmosphere into core/shell FeO/Fe(3)O(4) NPs with both FeO core and Fe(3)O(4) shell dimensions controlled by reaction temperature and time. Temperature-dependent magnetic properties were studied on FeO/Fe(3)O(4) NPs obtained from the FeO NPs oxidized at 60 and 100 °C for 30 min. A large exchange bias (shift in the hysteresis loop) was observed in these core/shell NPs. The relative dimensions of the core and shell determine not only the coercivity and exchange field but also the dominant reversal mechanism of the ferrimagnetic Fe(3)O(4) component. This is the first time demonstration of tuning exchange bias and of controlling asymmetric magnetization reversal in FeO/Fe(3)O(4) NPs with antiferromagnetic core and ferrimagnetic shell.     

Graphene films with large domain size by a two-step chemical vapor deposition process

The fundamental properties of graphene are making it an attractive material for a wide variety of applications. Various techniques have been developed to produce graphene and recently we discovered the synthesis of large area graphene by chemical vapor deposition (CVD) of methane on Cu foils. We also showed that graphene growth on Cu is a surface-mediated process and the films were polycrystalline with domains having an area of tens of square micrometers. In this paper, we report on the effect of growth parameters such as temperature, and methane flow rate and partial pressure on the growth rate, domain size, and surface coverage of graphene as determined by Raman spectroscopy, and transmission and scanning electron microscopy. On the basis of the results, we developed a two-step CVD process to synthesize graphene films with domains having an area of hundreds of square micrometers. Scanning electron microscopy and Raman spectroscopy clearly show an increase in domain size by changing the growth parameters. Transmission electron microscopy further shows that the domains are crystallographically rotated with respect to each other with a range of angles from about 13 to nearly 30°. Electrical transport measurements performed on back-gated FETs show that overall films with larger domains tend to have higher carrier mobility up to about 16,000 cm(2) V(-1) s(-1) at room temperature.     

Graphene surface-enabled lithium ion-exchanging cells: next-generation high-power energy storage devices

Herein reported is a fundamentally new strategy for the design of high-power and high energy-density devices. This approach is based on the exchange of lithium ions between the surfaces (not the bulk) of two nanostructured electrodes, completely obviating the need for lithium intercalation or deintercalation. In both electrodes, massive graphene surfaces in direct contact with liquid electrolyte are capable of rapidly and reversibly capturing lithium ions through surface adsorption and/or surface redox reaction. These devices, based on unoptimized materials and configuration, are already capable of storing an energy density of 160 Wh/kg(cell), which is 30 times higher than that (5 Wh/kg(cell)) of conventional symmetric supercapacitors and comparable to that of Li-ion batteries. They are also capable of delivering a power density of 100 kW/kg(cell), which is 10 times higher than that (10 kW/kg(cell)) of supercapacitors and 100 times higher than that (1 kW/kg(cell)) of Li-ion batteries.     

Total proteins and 11S protein fraction (Helianthinin) of sunflower seed (Helianthus annuus L.) — Effect of acetylation and succinylation

The total proteins and helianthinin (11S) from sunflower seeds were chemically modified by acetylation and succinylation. The extent of acetylation of the total proteins and helianthinin were 12%, 51%, 52%, 56% and 12%, 36%, 69%, 71%, respectively, while the extent of succinylation were 8%, 21%, 33%, 49% and 10%, 30%, 44%, 61%, respectively. The extent of modification was monitored by the availability of free lysyl residues in the proteins. The ultraviolet absorption maximum shifted to higher wavelengths in total proteins and in helianthinin; there was also an increase in absorbance in the 260 nm wavelength, as a function of increased chemical modification. The sedimentation velocity profile indicated the dissociation of the proteins to low molecular weight fraction (2S) through a 7S component. The dissociation occurred at low modification levels in both total proteins and in helianthinin. There was a gradual red shift and quenching in the fluorescence emission maximum at higher modification levels indicating the denaturation of the proteins as a result of this chemical modification. The change in absorbance as a function of temperature indicates minor changes suggesting that the conformation of the proteins is already altered to significant extents due to the chemical modification.     

Processable high Tg high strength fluorinated new poly(arylene ether)s containing imido aryl group

A series of poly(arylene ether)s ( 7a–7f ) were successfully synthesized by aromatic nucleophilic substitution reactions of imidoaryl biphenol (5), 4,9‐bis‐(4‐hydroxy‐phenyl)‐2‐phenyl‐benzo[f]isoindole‐1,3‐dione with six different trifluoromethyl substituted bisfluoro monomers ( 6a–6f ). The weight‐average molar masses of the polymers were up to 280 kD as measured by GPC. These poly(arylene ether)s exhibited glass transition temperatures up to 361°C in DSC. These polymers showed very high thermal stability up to 558°C for 10% weight loss under synthetic air in TGA. Except 7d–7f, remaining polymers 7a–7c were soluble in a wide range of organic solvents. Transparent thin films of these polymers cast from DCM or NMP exhibited tensile strengths up to 75 MPa and elongation at break up to 41% depending on their exact repeating unit structures. These poly(arylene ether)s showed cut‐off wavelength in between 400 and 450 nm except 7d and water absorption were in the range of 0.4 to 0.6%. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Effect of titania particles preparation on the properties of Ni–TiO2 electrodeposited composite coatings

In this paper, the effect of titania particles preparation on the properties of Ni–TiO₂ electrocomposite coatings has been addressed. Titania particles were prepared by precipitation method using titanium tetrachloride as the precursor. The titanyl hydroxide precipitate was subjected to two different calcinations temperatures (400 and 900 °C) to obtain anatase and rutile titania particles. These particles along with commercial anatase titania particles were separately dispersed in nickel sulfamate bath and electrodeposited under identical electroplating conditions to obtain composite coatings. The electrodeposited coatings were evaluated for their microhardness, wettability, corrosion resistance, and tribological behavior. The variation of microhardness with current density exhibited a similar trend for all the three composite coatings. The composite coating containing anatase titania particles exhibited higher microhardness and improved wear resistance. However, the corrosion resistance of the composite coating containing commercial titania powder was superior to that of plain nickel, Ni–TiO₂ composite coatings containing anatase and rutile titania particles. The poor corrosion resistance of these composite coatings was attributed to the higher surface roughness of the coatings. This problem was alleviated by incorporating ball-milled titania powders. The composite coatings with higher surface roughness were modified with a low surface energy material like fluoroalkyl silane to impart hydrophobic and superhydrophobic properties to the coatings. Among these coatings, Ni–TiO₂–9C coating exhibited the highest water contact angle of 157°.     

Hydroquinone increases the frequency of micronuclei in a dose-dependent manner in mouse bone marrow

The frequency of micronuclei (micronucleated polychromatic erythrocytes, MPCE and micronucleated normochromatic erythrocytes, MNCE) was studied at 12, 24 and 36 h post-treatment in the bone marrow of mice treated with 0, 0.78, 1.56, 3.125, 6.25, 12.5, 25, 50, 75 and 100 mg/kg body wt of hydroquinone (HQ). Treatment of mice with various doses of HQ resulted in a dose dependent increase in the frequency of both MPCE and MNCE at all the post-treatment time periods. The frequency of MPCE was significantly higher after administration of 3.125 mg/kg HQ at 24 h post-treatment, except 12 and 36 h, where a significant increase in the frequency of MPCE was observed only after administration of 6.25 mg/kg drug dose. Similarly, a significant increase in the frequency of MNCE was observed after 12.5 mg/kg HQ treatment at all the post-treatment time periods. The dose effect relationship between various HQ doses and MPCE and MNCE induction was linear and linear quadratic, respectively at all the post-treatment time periods. The PCE/NCE ratio declined in a dose dependent manner at all the post-treatment time periods and this decline was significant when compared to non-drug treated controls. The dose effect relationship was linear quadratic at all the post-treatment time periods studied.     

Turn-taking as a design principle for barge-in in Spoken Language Systems

It is widely acknowledged that users of Spoken Language Systems (SLS) want the ability to truncate system prompts by using a barge-in capability (e.g., Basson et al., 1995; Yankelovich et al., 1995). However, little has been published on how barge-in is used or if it adversely affects Automatic Speech Recognition (ASR) and the interface usability. Typically, user requests for barge-in are assumed to be based on the desire to make system interactions faster and therefore more similar to interactions with touch-tone systems. We believe that requests for a barge-in capability are rooted in the notion of discourse as a turn-taking event. Viewed in this way, we believe SLS can be enhanced to develop speech interfaces that are deemed more natural by users, as well as to increase system performance. This study addressed several issues. We found that users new to the system did not need to be informed about the barge-in capability before they attempted barge-in, that they used barge-in during almost half of their interactions with the system, and that they had identifiable patterns of barge-in use consistent with the turn-taking model. Results are presented and consequences for speech interface design as well as algorithm enhancement are discussed.     

Strength and elongation of spray formed Al-Si-Pb alloys

The strength and elongation to fracture of spray deposited Al-Si-Pb alloys were studied as a function of lead content, silicon content, and distance from the centre to periphery of the deposit. It is found that the ultimate tensile strength, proof stress and elongation to fracture decrease, linearly and exponentially, with the increase in lead content and porosity of the deposit, respectively. Both the strengths and elongation to fracture linearly increase with increasing distance from the centre to periphery of the deposit. The ultimate tensile strength and proof stress are higher at a higher silicon content and they have a linear relationship with the hardness of the deposit.     

Design and Fabrication of Micro Strip Patch Antenna for Cognitive Radio Applications

Wireless Personal Communications - A micro strip patch antenna (MPA) is fabricated to increase the bandwidth. The communication systems want antennas with high directivity, high signal strength and...