Structural,electrical and electrochemical properties of polyacrylonitrile-ammonium hexaflurophosphate polymer electrolyte system

Polyacrylonitrile (PAN) based polymer electrolyte membranes complexed with Ammonium hexafluorophosphate (NH₄PF₆) with different molar concentration are prepared by solution casting method. Increase in the amorphous nature by the addition of Ammonium salt and the formation of polymer-salt complex are confirmed by X ray diffraction studies and infrared spectroscopy respectively. The glass transition temperature is measured for all membranes and it showed a lowest value for the PAN complexed with 20 mol% of NH₄PF₆. Electrical properties are studied by AC impedance spectroscopy. An ionic conductivity of the order of 10^?3 Scm^?1 is obtained for the 80 PAN / 20 NH₄PF₆ polymer electrolyte. Conductivity, dielectric and modulus spectra from the impedance data are analysed to understand the ionic transport mechanism. Transference number measurement is done to study the ionic contribution to the charge transport. A proton battery with the configuration, Zn+ ZnSO₄. 7H₂O /80 PAN / 20 NH₄PF₆ / PbO₂ +V₂O₅ has been constructed and its discharge characteristics are studied.     

Effect of mass recovery evaporator temperature and condenser temperature on the performance of a solar adsorption-based desalination plant

Water scarcity increases alarmingly as the population increases. Over the years, a number of salt water desalination techniques have been proposed and reached limitations. The requirement of minimum energy is very well satisfied by an adsorption system, since it can operate with low-grade energy and waste heat exhaust from most industries. The first part of this work discusses the effect of condenser and evaporator temperatures on the performance of silica-gel adsorption cycle mathematically. The second part discusses the performance variations due to mass recovery in the two-bed adsorption system mathematically. It was found that the reduction in condenser temperature and increase in the evaporator temperature both increase the fresh water productivity and cooling capacity of a plant. A desalination plant with mass recovery assistance is superior in performance than the conventional plant. Portable water productivity of 8?m³/day/ton is achieved with the condenser temperature of 15°C and the evaporator temperature of 30°C.     

Studies on Egg Shell and SiC Reinforced Hybrid Metal Matrix Composite for Tribological Applications

Silicon - The hybrid metal matrix composite is developed through stir casting process. In theAl7075 aluminium matrix material, two different combination of reinforcements are used to make hybrid...     

Comparative study of arsenic removal by iron using electrocoagulation and chemical coagulation

This research studied As(III) and As(V) removal during electrocoagulation (EC) in comparison with FeCl₃ chemical coagulation (CC). The study also attempted to verify chlorine production and the reported oxidation of As(III) during EC. Results showed that As(V) removal during batch EC was erratic at pH 6.5 and the removal was higher-than-expected based on the generation of ferrous iron (Fe²⁺) during EC. As(V) removal by batch EC was equal to or better than CC at pH 7.5 and 8.5, however soluble Fe²⁺ was observed in the 0.2-μm membrane filtrate at pH 7.5 (10-45%), and is a cause for concern. Continuous steady-state operation of the EC unit confirmed the deleterious presence of soluble Fe²⁺ in the treated water. The higher-than-expected As(V) removals during batch mode were presumed due to As(V) adsorption onto the iron rod oxyhydroxides surfaces prior to the attainment of steady-state operation. As(V) removal increased with decreasing pH during both CC and EC, however EC at pH 6.5 was anomalous because of erratic Fe²⁺ oxidation. The best adsorption capacity was observed with CC at pH 6.5, while lower but similar adsorption capacities were observed at pH 7.5 and 8.5 with CC and EC. A comparison of As(III) adsorption showed better removals during EC compared with CC possibly due to a temporary pH increase during EC. In contrast to literature reports, As(III) oxidation was not observed during EC, and As(III) adsorption onto iron hydroxides during EC was only 5-30% that of As(V) adsorption. Also in contrast to literature, significant Cl₂ was not generated during EC, in fact, the rods actually produced a significant chlorine demand due to reduced iron oxides on the rod. Although Cl₂ generation and As(III) oxidation are possible using a graphite anode, a combination of graphite and iron rods in the same EC unit did not produce As(III) oxidation. However, a two-stage process (graphite anode followed by iron anode in separate chambers) was effective in As(III) oxidation and removal. The competing ions, silica and phosphate interfered with As(V) adsorption during both CC and EC. However, the degree of interference depends on the concentration and presence of other competing ions. In particular, the presence of silica lowered the effect of phosphate with increasing pH due to silica’s own significant effect at high pHs.     

Senescent CD4+CD28− T Lymphocytes as a Potential Driver of Th17/Treg Imbalance and Alveolar Bone Resorption during Periodontitis

Senescent cells express a senescence-associated secretory phenotype (SASP) with a pro-inflammatory bias, which contributes to the chronicity of inflammation. During chronic inflammatory diseases, infiltrating CD4⁺ T lymphocytes can undergo cellular senescence and arrest the surface expression of CD28, have a response biased towards T-helper type-17 (Th17) of immunity, and show a remarkable ability to induce osteoclastogenesis. As a cellular counterpart, T regulatory lymphocytes (Tregs) can also undergo cellular senescence, and CD28⁻ Tregs are able to express an SASP secretome, thus severely altering their immunosuppressive capacities. During periodontitis, the persistent microbial challenge and chronic inflammation favor the induction of cellular senescence. Therefore, senescence of Th17 and Treg lymphocytes could contribute to Th17/Treg imbalance and favor the tooth-supporting alveolar bone loss characteristic of the disease. In the present review, we describe the concept of cellular senescence; particularly, the one produced during chronic inflammation and persistent microbial antigen challenge. In addition, we detail the different markers used to identify senescent cells, proposing those specific to senescent T lymphocytes that can be used for periodontal research purposes. Finally, we discuss the existing literature that allows us to suggest the potential pathogenic role of senescent CD4⁺CD28⁻ T lymphocytes in periodontitis.     

Microstructural investigation on mechanical behavior of soil-geosynthetic interface in direct shear test

Interface shear strength between soil and geosynthetics mainly depends on the mechanical and physical properties of soil, geosynthetics and the normal stress acting at the interface. This paper presents results of an extensive experimental investigation carried out on sand-geosynthetic interface using modified large direct shear box. The study focusses on the shearing mechanism at the sand-geosynthetic interface and the effect of different parameters on the shearing mechanism. Smooth HDPE geomembrane, nonwoven needle punched geotextile and two types of sand having different mean particle size, have been used in the present study. Microstructural investigation of deformed specimen through Field Emission Scanning Electron Microscope (FESEM) reveals the shearing mechanism which includes interlocking and fiber stretching for sand-geotextile while sliding, indentation and plowing for sand-geomembrane interface. The shearing mechanism for sand-geomembrane interface highly depends on the normal stress and degree of saturation of sand. The critical normal stress that demarcates the sliding and plowing mechanism for sand-geomembrane interface is different for dry and wet sand. The amount of scouring (or plowing) of the geomembrane surface reduces with increase in the mean particle size of sand. FESEM images revealed that the sand particles get adhered to the geotextile fibers for tests involving wet sands. The present microstructural study aided in understanding the shearing mechanism at sand-geosynthetic interface to a large extent.     

Artificial neural networks and genetic algorithm for bearing fault detection

A study is presented to compare the performance of three types of artificial neural network (ANN), namely, multi layer perceptron (MLP), radial basis function (RBF) network and probabilistic neural network (PNN), for bearing fault detection. Features are extracted from time domain vibration signals, without and with preprocessing, of a rotating machine with normal and defective bearings. The extracted features are used as inputs to all three ANN classifiers: MLP, RBF and PNN for two- class (normal or fault) recognition. Genetic algorithms (GAs) have been used to select the characteristic parameters of the classifiers and the input features. For each trial, the ANNs are trained with a subset of the experimental data for known machine conditions. The ANNs are tested using the remaining set of data. The procedure is illustrated using the experimental vibration data of a rotating machine. The roles of different vibration signals and preprocessing techniques are investigated. The results show the effectiveness of the features and the classifiers in detection of machine condition.     

Relationship between Growth, Structure and Superconductivity of Single Crystal YBa2Cu3O7-δ

We study the crystal growth of YBa ₂ Cu ₃ O _7- with additives, using ac susceptibility, X-ray diffraction and STM. One specific additive, BaF ₂ , dramatically improves both the crystal growth and the superconducting properties. A cluster growth model is proposed to describe the function of the additive. F _– reduces the Al contamination of Cu-O chains, and the orthorhombicity increases. On a nanometer scale, the roughness of the chains decreases markedly. Superconductivity is further enhanced using non-contaminating crucibles. Large single crystals with T _C = 93.7 K and T _C = 0.1K were grown in Y ₂ O ₃ or BaZrO ₃ crucibles using the BaF ₂ additive.