Laser-induced fluorescence spectroscopy of dark- and light-adapted bean (Phaseolus vulgaris L.) and wheat (Triticum aestivum L.) plants grown under three irradiance levels and subjected to fluctuating lighting conditions

Fluorescence spectral characteristics associated with growth under different irradiance levels, and during rapidly changing lighting conditions, were measured on healthy bean (Phaseolus vulgaris L.) and wheat (Triticum aestivum L.) plants using a laser-induced fluorescence spectroscopy (LIFS) system. The LIFS system was designed as a prototype of a handheld field remote sensing system and used a tripled Nd:YAG laser to produce ultraviolet (UV) excitation photons at 355 nm. Dark-adapted canopies of the bean and wheat plants grown under 150, 300, or 450 μmol m⁻² s⁻¹ of photosynthetically active radiation (PAR) exhibited LIFS spectra with higher relative fluorescence intensities than emissions from light-adapted plants at all three light levels. Blue/red and blue/far-red leaf fluorescence ratios for both bean and wheat plants increased dramatically as PAR increased, but red/far-red ratios decreased as PAR increased. Light-adapted plants grown under the three light levels were then subjected to several rapidly changing lighting conditions. Plants were exposed sequentially to 150, 300, and 650 μmol m⁻² s⁻¹ PAR from metal halide lamps, followed by a fourth light treatment of 650 μmol m⁻² s⁻¹ PAR from a mixture of metal halide and tungsten-halogen lamps. The tungsten-halogen lamps added significant amounts of near-infrared (NIR) irradiation to the background light environment provided by the metal halide lamps. Results indicated that both bean and wheat canopies generally exhibited stable blue, green, red, and far-red fluorescence emissions when plants were exposed to 150, 300, and 650 μmol m⁻² s⁻¹ PAR from the metal halide lamps. In contrast, when bean and wheat plants were exposed to the NIR-enriched light supplied by the tungsten-halogen lamps, blue and green fluorescence remained stable, but red and far-red fluorescence increased dramatically immediately after exposure to the NIR photons. However, the increased levels of red and far-red fluorescence observed after exposure to NIR light decreased quickly (within 55 s) and returned to “baseline” levels observed at the start of the rapidly changing light experiments. Results indicate that handheld LIFS instruments can be used for remote sensing of plant canopies under a diversity of lighting conditions including full darkness, dawn and dusk lighting environments, and under rapidly changing light environments similar to those encountered on partly cloudy days.     

Reduced explicit constrained linear quadratic regulators

In this note, it is studied how structural properties of certain linear systems can be exploited to derive reduced dimension multiparametric quadratic programs that lead to explicit piecewise linear feedback solutions to the state and input constrained linear quadratic regulation problem. The reduced dimensionality typically results in suboptimal controllers of lower complexity, with associated computational advantages in the online implementation. At the heart of the methods are state-space projections based on the singular value decomposition.     

Risk management during requirements

Risk management is project management for adults. This means the manager adopts an adult attitude toward things that might go wrong during the project, a marked difference from the prevailing can-do attitude. The risk manager is obliged to do some cannot-do thinking, to look problems - even potentially unsolvable ones - directly in the eye and acknowledge that they could come to pass. The risk-aware project manager will accept a lucky break if it should happen but refuses to include it in the plan. At the heart of risk management is a public, continuing process of risk identification. Some risks that will threaten your project are utterly unique to your situation, but others are not. Over some 10 years of conducting risk identification exercises in organizations, we have found five risks that are so ubiquitous that we have dubbed them core risks. We focus on the first two core risks and discuss risk management as part of the requirements process: intrinsic schedule flaws-estimates that are wrong (undoable) from day one, often based on nothing more than wishful thinking; and specification breakdown - failure to achieve stakeholder consensus on what to build.     

High-aspect-ratio microstructures fabricated by X-ray lithography of polymethylsilsesquioxane-based spin-on glass thick films

 In this paper, a process for 200 μm high-aspect-ratio micro-optical (HARM) structures fabricated by deep X-ray lithography (DXRL) of polymethylislesuioane-based spin-on glass (SOG) thick films is presented. The SOG material used in the whole procedures is polymethylsilsesquioxane (GR650), which is a kind of sol-gel derived material and can be cured at a reasonable low temperature (75 °C). A technique to cast thick GR650 films was established in the overall process. After consolidation, the GR650 thick films were machined to reach 200 μm uniformly. Then, as negative resists, the GR650 thick films were patterned directly by DXRL. X-ray irradiated regions can be selectively retained with high structural resolution by development in an organic solvent, such as methanol. Parameter screening was done to find minimum and maximum doses needed for patterning/cross-linking, to vary development time, and to explore different film thickness. The whole process is a novel of technique to create HARM structures based on SOG materials without using molds. This technique can be extended to considerably larger structural heights. Surface and bulk compositions of the irradiated films were measured by XPS and Fourier transform infrared spectroscopy. Surface quality by roughness testing system (WYKO RST) was investigated to fabricate the microstructure with a high-accuracy surface. Received: 31 October 2001/Accepted: 23 January 2002 This work was partially supported by NSF/LEQSF (2001-04)-RII-02 grant “Micro/Nanodevices for Physical, Chemical and biological Sensors”.     

Non-destructive methods for space charge distribution measurements: what are the differences?

For more than 25 years, various techniques have been introduced for the nondestructive measurement of the space charge distribution in solid dielectrics. All these techniques can be classified into a set of three methods: (i) the thermal method, (ii) the pressure-wave-propagation method and (iii) the electro-acoustic method. Despite their apparent differences they are based on the same physical idea: the perturbation of the equilibrium between electrostatic and elastic forces in the material induces a response, either electrical or mechanical, which can be analyzed. In this paper, we demonstrate that the information on the material contained in the response is identical whatever the method used. As a consequence the differences between methods stand only in the nature of the perturbation and its physical properties.     

Surface texture analysis based upon the visually acquired perturbation of surface normals

A novel technique has been developed for the textural analysis of Lambertian surfaces while in the presence of a variable albedo. The method has direct application for the surface quality determination of cosmetically sensitive components, and has particular application where more traditional methods may prove unsatisfactory. A photometric stereo technique is used to facilitate the isolation of localised irregular features, such as scratching, indentations or small protrusions, which may be obscured by a coincident, regular or random surface albedo. A generic lighting arrangement is employed, which obviates the need for a customised lighting configuration. This represents a significant advantage for the configuration of industrial vision-based inspection systems. Promising experimental results have been obtained using example components, and are presented in the paper.     

Dielectric breakdown of a residual SF6 plasma at 3000 Kunder diatomic equilibrium

A residual plasma at 3000 K and under diatomic equilibrium is left inside an axially blown gas blast SF₆ circuit breaker after the thermal extinction of an arc. The breakdown of such a residual plasma depends on the electron generation and loss mechanisms. Altogether six ionization and chemical reactions relevant to the time scale of breakdown have been taken into account. It has been found that the critical field strength for breakdown is proportional to the pressure and is equal to 2.0 V/(m.Pa). This field strength is in agreement with the experimental results     

Simulation of reignition processes of vacuum circuit breakers inseries

The present theoretical study is based on experimental investigations and shows the transient behavior of vacuum tubes in series, in the case of reignition. Neglecting the real physical arc and replacing it by a programmable switch (time controlled), it can be demonstrated, in a preliminary study, that the theoretical studies do confirm the experimental results