膨化硝酸铵晶体特性研究

膨化硝酸铵是一种改性硝酸铵晶体,具有显著自敏化特征,成功应用于各类膨化硝铵炸药及震源药柱中.在膨化剂(表面活性剂)的作用下改善了膨化硝酸铵的物理性能和晶体结构及其特征.本文通过硝酸铵固体表面接触角的测量,算出了膨化硝酸晶体表面能;利用差热分析(DSC)技术给出了膨化剂对硝酸铵晶变的影响;采用x射线衍射分析了膨化硝酸铵晶体的晶格特性.     

激光导向伺服系统中满意PID调节器的LMI设计

利用带有图像处理功能的小型激光导向伺服系统,可以大大降低目标坐标测定仪操作手跟踪动态飞行目标的操作难度,从而提高激光回波率.与经典的矩阵分解方法不同,本文以线性矩阵不等式方法,研究了激光导向伺服系统的满意PID调节器设计问题.首先从约束指标的相容性出发,给出满足与给定圆形极点约束相容的输出方差的取值范围.然后,在此取值范围内,得到了求取同时满足上述两种约束的PID调节器参数的方法.靶场试验结果证明了其有效性.     

Using bald eagles to indicate the health of the Great Lakes' environment

The bald eagle (Haliaeetus leucocephalus) is one of the most studied birds of North America, and a great amount of natural life‐history information, including the response of various stressors on the eagles' ability to reproduce, are well known. In Michigan, the eagle has been chosen to track the trends of bioaccumulative compounds of concern across watersheds in the state. The state has been divided into major watersheds, and 20% of these are surveyed each year. A control area in northern Minnesota, Voyageurs National Park, is also sampled annually. We report here on the methods used, the preliminary results of the 1999 field season, and how differences in mercury concentrations varied over a 10‐year period. Mercury in feathers of nestling eagles declined over time only in Lakes Michigan and Huron, but have not decreased among other subpopulations in Michigan. Concentrations of polychlorinated biphenyls (PCBs) and 4,4′‐DDE in blood plasma from nestling eagles have declined over time for most subpopulations; however, they remain greater for breeding areas associated with the Great Lakes' food web. Sea eagles of the genus Haliaeetus are a good sentinel species to track trends in bioaccumulative compounds in aquatic systems.     

Micro-Analysis of the Contact Zone of Tribologically Loaded Second-Phase Reinforced Sol-Gel-Abrasives

Abrasives manufactured via the Sol-Gel route have increased the grinding efficiency of conventional abrasive grinding tools to a remarkable degree in the past ten years. Little is known, however, about detailed wear mechanisms of the abrasive on a nanometer scale. Sliding tests on a pin-on-disk tribometer and single grit scratching tests have therefore been performed in order to identify the wear mechanisms of these innovative materials. TEM-analysis has revealed that severe plastic deformation combined with both crack bridging and crack deflecting effects in the second phase characterise the abrasive rim zone. The surface of the abrasive is covered with an oxide debris layer which substantially improves the tribological behaviour.     

Yield Stress and Microstructure of Set Yogurt Made from High Hydrostatic Pressure-Treated Full Fat Milk

ABSTRACT: Set yogurts were prepared from fortified milk subjected to the following processes: (a) Thermal process (85C,°C,35 min), (b) High hydrostatic pressure process (193 or 676 MPa for 5 or 30 min), and (c) Nonprocessed milk (control). Yogurts from milk treated with 676 MPa for 30 min exhibited similar yield stress and water-holding capacity (WHC) to yogurts from heated milk. Transmission Electron Microscopy (TEM) micrographs exhibited small round casein micelle aggregates without appendages in yogurts from heated milk. Yogurts from milk treated with 193 MPa and untreated milk exhibited low yield stress, low WHC, and large clusters of coalesced micelles. Mechanisms for gel formation are discussed.     

Properties of Carbopol Solutions as Models for Yield-Stress Fluids

ABSTRACT: The effect of pH on the non-Newtonian viscosity (η)of aqueous Carbopol 940 solutions is presented with high resolution (pH increments about 0.4) between pH = 2.8 and 12.7. Aqueous NaOH was used to adjust pH of 1.48 wt % Carbopol solutions. A Contraves viscometer was used to measure steady-flow shear stress at known shear rate (γ) over the range γ= 8 to 195 s⁻¹. Yield stresses and shear-thinning η(γ) were observed. Data were fitted with a Herschel-Bulkley model, whose parameters (including yield stress) were expressed as functions of pH. Comparisons were made of η(γ) to the dynamic viscometric properties η'(ω) and η*(ω) for comparable ranges of γ and frequency (ω): A fairly close match was found between η and η* but η«η'. pH dependence included previously unreported extrema of h(pH) in the range of pH = 6.2 to 6.6. Because of sensitive control of rheological properties with pH, Carbopol solutions can be used to mimic a great range of shear-thinning and yield-stress behavior that should make them useful for model studies directed toward process and equipment design and evaluation.     

Comparison of the GFFF and LALLS Methods for the Measurement of Starch Granule Size Distribution in Spring Barley Caryopses

A newly developed method GFFF (Gravitational Field‐Flow Fractionation) and the well known method LALLS (Low Angle Laser Light Scattering) were used to assess starch granule size distribution of ten varieties of spring barley. As a distribution criterion, the ratio of starch granule content larger than 8 μm (type A) and smaller than 8 μm (type B) was chosen. Both methods divided the observed set in a similar way. Varieties Akcent, Forum and Atribut formed a variety set with the highest ratio of large and small starch granules. Varieties Scarlet and Kompakt had intermediate ratios. The remaining five varieties Amulet, Novum, Olbram, Tolar and Krona had the lowest ratios of large and small starch granules. Statistical analysis showed that there was a highly significant correlation between the GFFF and LALLS methods.     

Multiuser detection for DS-CDMA UWB in the home environment

We demonstrate the effectiveness of multiuser detection for an ultra-wideband (UWB) pulse based direct sequence spread spectrum system using code division multiple access. Extensive simulations were run using channel soundings of the 2-8 GHz band collected in a residential setting and characterized by a high level of multipath fragmentation. We show that the adaptive minimum mean square error (MMSE) multiuser detection (MUD) receivers are able to gather multipath energy and reject intersymbol and interchip interference for these channels to a much greater extent than RAKE receivers with 4 and 8 arms. We also demonstrate the adaptive MMSE is able to reject a narrowband IEEE 802.11a OFDM interferer, even for signal-to-interference ratio as severe as -30 dB. We show the adaptive MMSE exhibits only a 6 dB penalty relative to the single user case for the heavy multi-access interference (number of asynchronous users equal to spreading code length). The practical RAKE receivers were incapable of effectively rejecting either the strong narrowband interference or the heavily loaded wideband interference. Even more moderate levels of interference caused significant degradation in the performance of the practical RAKE receivers.     

Performance and modeling of advanced Ti:LiNbO3 digitaloptical switches

High-performance Y-branch digital optical switches realized in Ti:LiNbO₃ are presented. Their switching response functions have been optimized in terms of switch voltage and crosstalk ratio. The optimization is based on analyzing different types of waveguide shaping and switching arrangements using coupled mode theory and computer simulations. Excellent switching characteristics are achieved with devices exploiting a specially shaped waveguide branch in a dilated switch arrangement. Demonstrated performances include switching voltage as low as 9 V with crosstalk suppression better than 45 dB and fiber-to-fiber losses as low as 4 dB. Polarization independence with crosstalk suppression better than 40 dB over a 1520- to 1570-nm wavelength range is achieved for any applied switch voltage greater than 18 V. These optimized digital optical switches have further demonstrated the capability to reshape electrical input signals at switching rates of several hundred megahertz     

Low-loss athermal bulk-optic flat-top passband MUX/DMUX

Low-loss (<6 dB), flat-top, 16-wavelength, 100-GHz channel spacing DWDM (de)multiplexers are reported. The bulk-optics architecture used allows excellent thermal stability for operating temperature [-10, 60°C]