ACTNET: End-to-End Learning of Feature Activations and Multi-stream Aggregation for Effective Instance Image Retrieval

International Journal of Computer Vision - We propose a novel CNN architecture called ACTNET for robust instance image retrieval from large-scale datasets. Our key innovation is a learnable...     

Soret and Dufour effects between two rectangular plane walls with heat source/sink

This study addresses the thermo‐diffusion and the diffusion‐thermo phenomena in a semi‐infinite absorbent channel whose walls are contracting/expanding, with heat source/sink effects. The governing partial differential equations with suitable boundary conditions are transformed to a system of dimensionless ordinary differential equations. An analytic solution of the problem has been found using a technique called homotopy analysis method (HAM). HAM gives consistently valid answers to the problem over an extensive variety of parameters and also provides better accuracy. To validate the analytical results, a comparison has been presented with a numerical solution calculated by using the parallel shooting method. The effects of dimensionless parameters, that is, deformation parameter, Reynolds number, Soret and Dufour numbers, and heat source/sink parameter on the expressions of velocity, temperature, and concentration profiles are analyzed graphically to understand the physics of the deformable channel. It has been noted that the velocity across the channel is higher for the expanding channel, as compared to that for the contracting channel. Also the Soret and Dufour number increases the temperature of the fluid, and decreases the concentration. The temperature profile has an increasing behavior in the case of heat source, and a decreasing behavior in the case of heat sink.     

Characterization of the Ion Beam Current Density of the RF Ion Source with Flat and Convex Extraction Systems

Silicon - The characterization of ion beam current density distribution and beam uniformity is crucial for improving broad-beam ion source technologies. The design of the broad ion beam extraction...     

Prediction of the maximum spoutable height in spout-fluid beds

The development of the semi-theoretical correlation in Hadzisdmajlovic et al. (1983) for predicting the maximum spoutable height in a spout-fluid bed, is observed to involve certain discrepancies. Based on their experimental data, a new correlation is proposed.     

A fuzzy logic rule-based automatic target recognizer

Methods for modeling and managing uncertainty in computer vision systems have received increased attention in recent years. Automatic target recognition is one application area of computer vision where the demands are particularly acute. In this article, fuzzy logic is proposed as a means of handling uncertainty in an expert system structure for automatic target recognition. A new technique for logical inference is described which is well-suited for this type of application. A prototype system has been developed and tested on multisensor and temporal images. the results are compared to a similar expert system which used a numeric uncertainty calculus.     

Hydrogen limitation--a method for controlling the performance of membrane biofilm reactor for autotrophic denitrification of wastewater.

Hydrogen-driven denitrification using the fiber membrane biofilm reactor (MBfR) was evaluated for consistent operation in tertiary wastewater treatment. The possibility of controlling the process rates, as well as biofilm parameters by supplying limited amounts of electron donor (hydrogen), was tested. Limiting the hydrogen supply proved to be efficient in controlling the biofilm growth and performance of the MBfR. Denitrification rates remained unchanged for both synthetic wastewater (SWW) and real municipal wastewater (MWW) effluent as well through the fluctuations in the substrate (NO3-N) concentration. The average denitrification rates were 0.50 (+/- 0.02) g NO3-N per day per m2 for SWW and 0.59 (+/- 0.04) g NO3-N per day per m2 for MWW. Biofilm density rather than thickness was the determining factor in substrate diffusion and biofilm sloughing, ultimately determining operating stability. Limited hydrogen supply assured constant volatile solids (VS) concentration in the biofilm. It was determined that VS/TS ratio higher than 0.25 assured stable biofilm operation. Decrease of VS/TS ratio below 0.25 led to shearing of the nonbiological outer layers of the biofilm. The values of chemical oxygen demand (COD), volatile suspended solids (VSS) and total suspended solids (TSS) in the final effluent were stable and well below wastewater effluent guidelines. Substitutions of bicarbonate with gaseous carbon dioxide as the carbon source did not affect denitrification rates despite lower than optimum pH conditions.     

Computations of Explosive Boiling in Microgravity

Dynamics of the explosive growth of a vapor bubble in microgravity is investigated by direct numerical simulation. A front tracking/finite difference technique is used to solve for the velocity and the temperature field in both phases and to account for inertia, viscosity, and surface deformation. The method is validated by comparison of the numerical results with the available analytical formulations such as the evaporation of a one-dimensional liquid/vapor interface, frequency of oscillations of capillary waves, and other numerical results. Evolution of a three-dimensional vapor nucleus during explosive boiling is followed and a fine scale structure similar to experimental results is observed. Two-dimensional simulations yield a similar qualitative instability growth.     

Incorporation of a Regularization Term to Control Negative Correlation in Mixture of Experts

Combining accurate neural networks (NN) in the ensemble with negative error correlation greatly improves the generalization ability. Mixture of experts (ME) is a popular combining method which employs special error function for the simultaneous training of NN experts to produce negatively correlated NN experts. Although ME can produce negatively correlated experts, it does not include a control parameter like negative correlation learning (NCL) method to adjust this parameter explicitly. In this study, an approach is proposed to introduce this advantage of NCL into the training algorithm of ME, i.e., mixture of negatively correlated experts (MNCE). In this proposed method, the capability of a control parameter for NCL is incorporated in the error function of ME, which enables its training algorithm to establish better balance in bias-variance-covariance trade-off and thus improves the generalization ability. The proposed hybrid ensemble method, MNCE, is compared with their constituent methods, ME and NCL, in solving several benchmark problems. The experimental results show that our proposed ensemble method significantly improves the performance over the original ensemble methods.     

Using genetic algorithm for the optimization of seismic behavior of steel planar frames with semi-rigid connections

Beam-column connections have a significant role in the results of the analysis and the design of steel frames. In this paper, a genetic algorithm has been used for the non-linear analysis and design of steel frames. For minimizing the weight of frames, while satisfying the applied constraints and restraints such as the limits of normal and combined stresses, criteria such as target displacement(s) and the number and locations of plastic hinges were used. To analyze and design the frame elements, I and box-shaped standard sections were used for beams and columns, respectively. Finally, some clues for finding optimizing semi-rigid connection stiffness values for beam-to-column connections have been obtained. The degrees of these rigidities are obtained by a genetic algorithm during the procedure of optimization in order to reach a frame with the minimum weight. SAP2000 structural analysis program was used to perform modal analysis and linear and non-linear static solutions as well as the design of the elements. A MATLAB program was written for the process of optimization. The procedure of optimization was based on a weight minimization carried out for 9 steel frames. Thus, the optimum connection stiffness could be obtained for minimizing the weight of the structure. The results show that the non-linear analysis gives less weight for short period frames with semi-rigid connections compared to those of linear ones. However, by increasing the periods of frames, much less weights are obtained in the case of non-linear analysis with semi-rigid connections.     

Grain boundary embrittlement in Cu-AI-Niβ-phase alloys

The grain boundary embrittlement in Cu-AI-Ni-phase alloys has been investigated. The study included both the bulk alloys and rapidly solidified ribbons. It was observed that the fracture characteristics and the phase transformations in rapidly solidified ribbons were similar to those in the bulk alloys. Various factors responsible for intergranular fracture were considered. It was found that intrinsic or extrinsic precipitates at the grain boundaries are not responsible for the embrittlement. It was further observed that the segregation of impurities does not occur at the grain boundaries and hence is not a factor contributing to the embrittlement. The intrinsic characteristics, however, appear to play an important role. These may include high elastic anisotropy, ordered structure and plastic incompatibility. Severe embrittlement in high-nickel alloys is associated with spinodal decomposition occurring in these alloys. The large grain size exhibited by these alloys is found not to be a significant factor contributing to the embrittlement.