A study of mathematical programming methods for structural optimization. Part I: Theory

A comprehensive study of various mathematical programming methods for structural optimization is presented. In recent years, many modern optimization techniques and convergence results have been developed in the field of mathematical programming. The aim of this paper is twofold: (a) to discuss the applicability of modern optimization techniques to structural design problems, and (b) to present mathematical programming methods from a unified and design engineers' viewpoint. Theoretical aspects are considered here, while numerical results of test problems are discussed in a companion paper. Special features possessed by structural optimization problems, together with recent developments in mathematical programming (recursive quadratic programming methods, global convergence theory), have formed a basis for conducting the study. Some improvements of existing methods are noted and areas for future investigation are discussed.     

Impact of open dumping of municipal solid waste on soil properties in mountainous region

This paper presents the effect of open dumping of municipal solid waste (MSW) on soil characteristics in the mountainous region of Himachal Pradesh, India. The solid waste of dumpsite contains various complex characteristics with organic fractions of the highest proportions. As leachate percolates into the soil, it migrates contaminants into the soil and affects soil stability and strength. The study includes the geotechnical investigation of dump soil characteristics and its comparison with the natural soil samples taken from outside the proximity of dumpsites. The geochemical analysis of dumpsite soil samples was also carried out by scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS). Visual inspection revealed that the MSW consists of high fraction of organics, followed by paper. The soil samples were collected from five trial pits in the dumpsites at depths of 0.5 m, 1 m and 1.5 m. Then the collected soil samples were subjected to specific gravity test, grain size analysis, Atterberg's limit test, compaction test, direct shear test, California bearing ratio (CBR) test and permeability analysis. The study indicated that the dumpsite soils from four study regions show decreasing trends in the values of maximum dry density (MDD), specific gravity, cohesion and CBR, and increasing permeability as compared to the natural soil. The results show that the geotechnical properties of the soils at all four study locations have been severely hampered due to contamination induced by open dumping of waste.     

Distribution of mineral species in different coal seams of Talcher coalfield and its transformation behavior at varying temperatures

International Journal of Coal Science & Technology - Mineral phase characterization and thorough understanding of its transformation behavior during combustion are imperative to know the...     

Investigation of CL‐20 and RDX Nanocomposites

Nanocrystalline explosives offer a number of advantages in comparison to conventional energetics including reduced sensitivity and improved mechanical properties. In this study, formulations consisting of 90 % hexanitro‐hexaazaisowurtzitane (CL‐20) or cyclotrimethylene trinitramine (RDX) and 10 % polyvinyl alcohol (PVOH) were prepared with mean crystal sizes ranging from 200 nm to 2 μm. The process to create these materials used a combination of aqueous mechanical crystal size reduction and spray drying. The basic physical characteristics of these formulations were determined using a variety of techniques, including scanning electron microscopy, X‐ray diffraction, and Raman spectroscopy. Compressive stress‐strain tests on pressed pellets revealed that the mechanical properties of the compositions improved with decreasing crystal size, consistent with Hall‐Petch mechanics. In the most extreme case (involving CL‐20/PVOH formulations), crystal size reduction from 2 μm to 300 nm improved compressive strength and Young’s modulus by 126 % and 61 %, respectively. These results serve to highlight the relevance of structure‐property relationships in explosive compositions, and particularly elucidate the substantial benefits of reducing the high explosive crystal size to nanoscale dimensions.     

Modeling gas absorption accompanied by chemical reaction in bubble column and foam-bed slurry reactors

The published data in the literature and the reported models on foam-bed reactors have been reanalyzed. It is observed that the models have been developed assuming negligible conversion in the storage section although the storage constitutes 65–85% of the total volume of liquid/slurry charged into the reactor. For confirmation of the reported information, in the present work, experiments have been performed in foam-bed and bubble column slurry reactors for carbonation of hydrated lime slurry using carbon-dioxide gas under identical conditions. A comparison of the relative performances of the two reactors has been made. Storage section is found to be the main section governing the performance of the foam-bed slurry reactor. New mathematical models have been developed for both the reactors. The model predictions agree well with the experimental data.     

Modeling Oxidation of Soot Particles Within a Laminar Aerosol Flow Reactor Using Computational Fluid Dynamics

This work examines the measurement of surface specific soot oxidation rates with the High Temperature Oxidation-Tandem Differential Mobility Analyzer (HTO-TDMA) method. The Computational Fluid Dynamics package CFD-ACE⁺ is used to understand particle flow, oxidation and size dependent particle losses in the laminar aerosol flow reactor using an Eulerian-Lagrangian framework. Decrease of DMA selected mono-disperse particle size distribution due to oxidation within the aerosol tube is modeled using fitted kinetic soot oxidation parameters. The effects of Brownian diffusion and thermophoresis on particle flow and loss to the reactor walls are evaluated. The position of peak particle diameter, which is used as an indicator to determine oxidation rate, is found to be independent of diffusion, thermophoresis and secondary flow effects, thus validating its use in deriving kinetic soot oxidation parameters. Diffusion does not affect the evolution of particle size distribution within the reactor. However, thermophoresis is found to be the dominant mechanism influencing both shape of particle size distribution and particle loss to the walls of the aerosol reactor. Simulations show reduced effects of secondary recirculating flows on the particle flow trajectories in a vertical furnace as compared to horizontal furnace orientation. This work highlights the importance of making accurate measurements of temperature within the modeling domain. Since gas temperature within the flow tube could not be measured with high radial resolution using radiation shielded thermocouple, the derived soot oxidation rate may be uncertain by a factor of 2. Importantly, CFD simulations suggest that a distribution of temperature and size-dependent particle reactivities may be present in the reactor, requiring further theoretical and experimental investigation.     

Gamma Irradiation Insensitivity of GaAs Schottky Diodes

Guarded Al-and Au-nGaAs Schottky barrier diodes were subjected to Co60 ?-ray irradiation and their electrical characteristics evaluated. These GaAs Schottkys did not exhibit significant change in their I-V and C-V characteristics up to an absorbed dose as high as 1.5 × 107 rads. Diodes that were previously neutron-irradiated with consequent degradation were also subjected to Co60 irradiation, but no synergistic changes were observed.