Conduction mechanism and dielectric properties of BiFeO3–BaTiO3 solid solutions

The first measurements are reported for the frequency-dependent conductivity of (1?x)BiFeO₃–xBaTiO₃ (x = 0.10, 0.15 and 0.30) solid solutions in the frequency range of 10⁰–10⁶ Hz and in the temperature range of 50–300 °C. Powder X-ray diffraction confirms the formation of solid solutions. The dielectric properties were seen to improve with increasing BaTiO₃ (BT) content. The conductivity (AC and DC) measurements reveal an inverse variation of the frequency exponent ‘s’ with temperature, high density of states and thermally activated process. The calculated density of states was found to be N(E_f) = 80.2 × 10³² eV^?1 cm^?1 at 1 kHz and 50 °C for BiFeO₃–10 % BaTiO₃ (BFO–10 % BT) solid solution. The impedance spectroscopy analysis confirms the presence of grain and grain boundary affecting the conductivity. Our results provide the first unambiguous evidence of conduction in crystallite BFO–BT solid solutions through correlated-barrier-hopping model.     

Theragnostic Efficacy of K18 Response in Alcohol Use Disorder with Clinically Significant Fibrosis Using Gut-Liver Axis

(1) Background: Fibrosis in early-stage alcohol-associated liver disease (ALD) is commonly under-diagnosed in routine clinical practice. This study characterized the liver-injury and cell death response in alcohol use disorder (AUD) patients with ALD who also exhibited fibrosis and assessed the efficacy of standard of care (SOC) treatment in the improvement in liver injury. (2) Methods: Forty-eight heavy-drinking AUD patients aged 21–65 yrs. without clinical manifestations of liver injury were grouped by Fibrosis-4 (FIB-4) score, as negative (Gr.1 < 1.45, n = 21) or positive (Gr.2 ≥ 1.45, n = 27). Patients received 2-weeks (2 w) inpatient SOC. Data on demographics, drinking patterns, liver-injury, immune markers, and liver cell death (K18s) markers were analyzed at baseline (BL) and after 2 w SOC. (3) Results: Lifetime drinking (LTDH, yrs.) and acute heavy drinking (Heavy Drinking Days Past 90 Days [HDD90]) markers were significantly higher in Gr.2 vs. Gr.1. BL ALT, AST, AST:ALT and K18M65 were considerably higher in Gr.2. Dysregulated gut dysfunction and elevated immune activity were evident in Gr.2 characterized by TNF-α, IL-8 and LPS levels. After SOC, Gr.2 showed improvement in AST, ALT, AST/ALT ratio; and in the K18M65, K18M30 and K18M65/M30 ratio vs. Gr.1. The true positivity of BL IL-8 response to predict the improvement in K18M65 to normal levels among Gr.2 patients against those who did not have improvement after 2 w SOC was very high (AUROC = 0.830, p = 0.042). (4) Conclusions: Gut dysfunction, elevated cytokine response and necrotic liver cell death were elevated in AUD patients with early-stage ALD. K18 showed promise as a predictive theragnostic factor to differentiate among the AUD patients with early-stage ALD and baseline fibrosis who had improvement in liver injury against those who did not, by the levels of baseline IL-8.     

Mobile Surface Reflectometry

We present two novel mobile reflectometry approaches for acquiring detailed spatially varying isotropic surface reflectance and mesostructure of a planar material sample using commodity mobile devices. The first approach relies on the integrated camera and flash pair present on typical mobile devices to support free‐form handheld acquisition of spatially varying rough specular material samples. The second approach, suited for highly specular samples, uses the LCD panel to illuminate the sample with polarized second‐order gradient illumination. To address the limited overlap of the front facing camera's view and the LCD illumination (and thus limited sample size), we propose a novel appearance transfer method that combines controlled reflectance measurement of a small exemplar section with uncontrolled reflectance measurements of the full sample under natural lighting. Finally, we introduce a novel surface detail enhancement method that adds fine scale surface mesostructure from close‐up observations under uncontrolled natural lighting. We demonstrate the accuracy and versatility of the proposed mobile reflectometry methods on a wide variety of spatially varying materials.     

CSatDTA: Prediction of Drug–Target Binding Affinity Using Convolution Model with Self-Attention

Drug discovery, which aids to identify potential novel treatments, entails a broad range of fields of science, including chemistry, pharmacology, and biology. In the early stages of drug development, predicting drug–target affinity is crucial. The proposed model, the prediction of drug–target affinity using a convolution model with self-attention (CSatDTA), applies convolution-based self-attention mechanisms to the molecular drug and target sequences to predict drug–target affinity (DTA) effectively, unlike previous convolution methods, which exhibit significant limitations related to this aspect. The convolutional neural network (CNN) only works on a particular region of information, excluding comprehensive details. Self-attention, on the other hand, is a relatively recent technique for capturing long-range interactions that has been used primarily in sequence modeling tasks. The results of comparative experiments show that CSatDTA surpasses previous sequence-based or other approaches and has outstanding retention abilities.     

Stopping power of Mylar for heavy ions up to copper

The stopping powers of Mylar for several heavy ions covering Z=11 to 29 in the energy range 0.3 to 2.3 MeV/n have been measured using the elastic recoil detection technique and twin detector system. The technique provided a unique method to generate a variety of variable energy ion species utilizing a fixed energy 140 MeV Ag¹³⁺ primary beam from the Pelletron accelerator facility at Nuclear Science Center, New Delhi, India. Most of these measurements are new. The experimentally measured stopping power values have been compared with those calculated using LSS theory, Ziegler et al. formulation and Northcliffe and Schilling tabulations. Merits and demerits of these formulations are highlighted. Stopping power calculations using the Hubert et al. formulation have been extended successfully beyond its recommended range of validity, i.e. 2.5–500 MeV/n down to energies as low as 0.5 MeV/n.     

Error Detecting Dual Basis Bit Parallel Systolic Multiplication Architecture over GF（2^m）

An error tolerant hardware efficient verylarge scale integration （VLSI） architecture for bitparallel systolic multiplication over dual base, which canbe pipelined, is presented. Since this architecture has thefeatures of regularity, modularity and unidirectionaldata flow, this structure is well suited to VLSIimplementations. The length of the largest delay pathand area of this architecture are less compared to the bitparallel systolic multiplication architectures reportedearlier. The architecture is implemented using Austria Micro System＇s 0.35 μm CMOS （complementary metaloxide semiconductor） technology. This architecture canalso operate over both the dual-base and polynomialbase.     

Control of Three-Phase, Four-Wire PWM Rectifier

This paper presents the analysis, design, and control of a four-wire rectifier system using split-capacitor topology. The proposed controller does not require any complex transformation or input voltage sensing. A detailed analysis of the distortions in the line and the neutral currents is presented. It is shown that the single-carrier-based, conventional sine-triangle PWM (CSPWM) scheme results in a peak-to-peak neutral current ripple, which is greater than the peak-to-peak ripple of any of the line currents. Also, for the same operating condition, the distortions in the line and the neutral currents increase considerably, when a three-limb boost inductor is used instead of three single-phase inductors. A three-carrier-based SPWM scheme is proposed in this paper. Compared to CSPWM, the proposed scheme significantly reduces the neutral current ripple when three single-phase inductors are used, and reduces both line and neutral current ripples when a three-limb inductor is used. The control scheme is verified through Matlab simulation. It is implemented on an field-programmable gate-array (FPGA)-based digital controller and tested on a prototype. Simulation and experimental results are presented.     

Novel Systemic Treatment Modalities Including Immunotherapy and Molecular Targeted Therapy for Recurrent and Metastatic Head and Neck Squamous Cell Carcinoma

Head and neck squamous cell carcinomas (HNSCCs) are the sixth most common cancers worldwide. More than half of patients with HNSCC eventually experience disease recurrence and/or metastasis, which can threaten their long-term survival. HNSCCs located in the oral cavity and larynx are usually associated with tobacco and/or alcohol use, whereas human papillomavirus (HPV) infection, particularly HPV16 infection, is increasingly recognized as a cause of oropharyngeal HNSCC. Despite clinical, histologic, and molecular differences between HPV-positive and HPV-negative HNSCCs, current treatment approaches are the same. For recurrent disease, these strategies include chemotherapy, immunotherapy with PD-1-inhibitors, or a monoclonal antibody, cetuximab, that targets epidermal growth factor; these therapies can be administered either as single agents or in combination. However, these treatment strategies carry a high risk of toxic side effects; therefore, more effective and less toxic treatments are needed. The landscape of HNSCC therapy is changing significantly; numerous clinical trials are underway to test novel therapeutic options like adaptive cellular therapy, antibody-drug conjugates, new targeted therapy agents, novel immunotherapy combinations, and therapeutic vaccines. This review helps in understanding the various developments in HNSCC therapy and sheds light on the path ahead in terms of further research in this field.