Comparison of the mechanical and biological properties of self-adhering materials

Purpose: The purpose of the present study was to compare the Vickers hardness numbers (VHNs), roughness numbers (RNs) and biological compatibility of glass carbomer (Glass Fill), resin-modified glass ionomer (Fuji II LC) and self-adhering flowable composite (Vertise Flow) materials. Materials and methods: Disc-shaped specimens of test materials (n = 15/group) were prepared, and VHNs and RNs were determined after 24 h. A direct contact test was used for cytotoxicity evaluation. Cell viability was measured for 24 h post-exposition with a photometric test (MTT assay; n = 16). Data were analysed using one-way analysis of variance with a post hoc Tukey’s test, the Kruskal–Wallis test and the Mann–Whitney U-test (p < 0.05). Results: Fuji II LC had the highest VHN. The VHN of Fuji II LC differed significantly from those of the other materials (p < 0.05). The RNs of Fuji II and Glass Fill were higher than that of Vertise Flow (p < 0.05). The self-adhering materials were not significantly cytotoxic compared with the control group (p > 0.05). Conclusions: The materials tested in this study showed a similar lack of cytotoxicity. The VHN of Fuji II LC was the highest, and the RN of Vertise Flow was the lowest.     

Characterization of nanocomposite resol resins: Individual/synergist effects of alendronic acid and sepiolite

Alendronic acid modified resol nanocomposite resins (AA‐PFNCRs) and sepiolite modified resol nanocomposite resins (SEP‐PFNCRs) have been synthesized by in situ method in the presence of base catalyst. Additionally, the synergistic effects of alendronic acid and sepiolite clay (AA‐SEP‐PFNCR) on the resol resin have been studied. The structure, morphology, and thermal properties of these nanocomposites have been investigated by Fourier Transform Infrared Spectroscopy (FTIR), Differential Scanning Calorimetry (DSC), Thermogravimetric Analysis (TGA), and X‐ray Diffraction (XRD). The results demonstrated the interactions between the fillers and resol resin. Thermal properties of nanocomposite resins were improved due to alendronic acid and sepiolite. The obtained samples were also characterized morphologically by Scanning Electron Microscope (SEM). © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43807.     

Tribological Behavior of TiAlN,AlTiN, and AlCrN Coatings at Boundary Lubricating Condition

In this study, ~?3.5 µm thick multilayer titanium alumina nitride (TiAlN), alumina titanium nitride (AlTiN), and alumina chromium nitride (AlCrN) coatings were deposited on the H13 steel surface by cathodic arc physical vapor deposition (CAPVD) method. The tribological performance of the coatings was evaluated by a tribometer at boundary lubrication condition. Then, coating surfaces were observed by optical microscope, optical profilometer, and atomic force microscope to evaluate the morphological changes, wear volumes, and tribofilm thickness. Also, scanning electron microscopy (energy dispersive X-ray) and X-ray photoelectron spectrometry analyses were applied to coating surfaces for the tribochemical evolution of the tribofilm. Results showed that AlCrN coating performed the best tribological behavior at boundary lubricated condition, when compared to TiAlN and AlTiN coatings and it can be used as a wear resistant cam tappet coating in internal combustion engines.     

Optimum design of cam-roller follower mechanism using a new evolutionary algorithm

Selection of tooling to perform specific operations like drilling and milling on ceramic materials using rotary ultrasonic machining process is an important aspect to meet stringent dimensions on workpiece as well as intended performance of tool. This phenomenon is more critical for micro rotary ultrasonic machining. In the present study, an effort was made to do micro drilling operation of Ø0.3 mm tool with varying geometry, having different wall thicknesses and abrasive grain sizes using design of experiments. The effect of tool-based parameters like grain size and wall thickness has been studied on axial cutting force, radial cutting force, tool wear, edge chipping area and taper. After examining axial and radial cutting forces, it has been concluded that lower wall thickness (80 μm) tool is good for drilling operation; and higher wall thickness (100 μm) tool is good for milling operation under same material removal rate conditions. It has been also investigated that lower wall thickness (80 μm) tool has less edge chipping area and less taper and can impart high drilling depth as compared to higher wall thickness (100 and 150 μm) tool. It is also concluded that lesser grain size (15 μm) tools are advantageous in terms of edge chipping area and cutting force for drilling and milling operations as compared to higher grain size (30, 35 and 45 μm) tool at constant material removal rate. Higher grain size tools have been broken at 1.13 mm³/h material removal rate conditions due to bad profile accuracy. But higher grain size tools have worked fairly well at less material removal rate condition. Higher grain size tools produced less wear. Tool wear was found minimum in higher wall thickness (100 μm) tool having higher abrasive grain size (30 μm). Using inferred results, Ø0.3 mm drilling experiments have been carried out on six aerospace ceramic materials. Also, groove of 0.5 mm size using Ø0.3 mm optimised tool has been successfully carried out in sintered SiC.     

Investigation of current‐voltage characteristics and current conduction mechanisms in composites of polyvinyl alcohol and bismuth oxide

Temperature dependent current‐voltage (I–V) measurements of Au/Polyvinyl Alcohol + Bi₂O₃/n‐Si structure were conducted between 100 and 350 K for investigating the temperature dependence of I–V characteristics and current conduction mechanisms in the structure. Series resistance of the structure is calculated using Ohm's law and Cheungs' method. Ideality factor (n) and zero‐bias barrier height (Φ_Bo) were obtained considering thermionic emission theory. From 100 to 350 K, n changed from 32.1 to 3.54, and Φ_Bo changed from 0.27 to 0.99 eV. Obtained temperature dependent values of n and Φ_Bo suggested that thermionic emission is not the dominant current conduction mechanism. Therefore, Ln(I)–Ln(V) curves of the studied structure were plotted for investigating current conduction mechanisms in the structure and current flow is explained considering space charge limited current. Moreover, density of interface states (D_it) in the structure were calculated and its temperature dependence was investigated such that D_it values are reduced to the order of ～10¹³ eV^?1 cm^?2 from ～10¹⁴ eV^?1 cm^?2 with increasing temperature. POLYM. ENG. SCI., 54:1811–1816, 2014. © 2013 Society of Plastics Engineers     

The effect of replacing fat with oat bran on fatty acid composition and physicochemical properties of meatballs

Oat bran was used as a fat substitute in the production of meatballs. The effect of oat bran addition on the fatty acid composition, trans fatty acids, total fat, some physicochemical and sensory properties of the samples was studied. Meatballs were produced with four different formulations; the addition of 5, 10, 15 and 20% oat bran. Control samples were formulated with 25% fat addition as in commercial production. The major fatty acids were cis-oleic, palmitic and stearic acid in all the meatball samples, those with oat bran added as well as the control. Meatballs containing oat bran had lower concentrations of total fat and total trans fatty acids than the control samples. Meatballs made with 20% oat bran had the highest protein, salt and ash contents, L value (lightness), b value (yellowness), and the lowest moisture content and a value (redness). There was no significant difference among the meatball samples with respect to sensory properties, and all samples had high acceptability.     

Determination of industrial pollution effects on citrus honeys with chemometric approach

The aim of this study was to determine the levels of essential, trace and toxic elements, such as K, Ca, Fe, Cu, Al, Ni, Sn, Pb and Cd in citrus honeys from different regions (industrialized and nonindustrialized) of Hatay, Turkey. K, Ca, Na and Mg were the most abundant elements, with mean contents of 363.5, 256.6, 88.1 and 37.7 mg/kg, respectively. The trace element mean contents ranged between 0.032 and 15.58 mg/kg. Significant differences in Fe, Cu, Al, Ni, Sn, Pb, Cd, Co and Sr levels were observed between two different regions. The findings that Fe, Cu, Al, Ni, Sn, Pb, Cd, Co and Sr contents in citrus honeys from industrialized regions were higher than citrus honeys from non-industrialized regions indicate that the honeys were affected by industrial pollution. Chemometric methods were applied to classify honey according to mineral content. Cluster analysis showed three clusters corresponding to the three different regions.     

Anticonvulsant activity of furanocoumarins and the essential oil obtained from the fruits of Heracleum crenatifolium

The anticonvulsant activity of furanocoumarins, coumarin mixture and the essential oil obtained from the fruits of Heracleum crenatifolium was examined against maximal electroshock (MES)-induced seizures in mice. Bergapten showed significant anticonvulsant activity. The furanocoumarins isolated from the fruits of the plant were identified using thin-layer chromatography, melting points and spectroscopic methods (IR, MS, ¹H NMR) as isobergapten (1), pimpinellin (2), bergapten (3), isopimpinellin (4), sphondin (5) and byak-angelicol (6). The essential oil content of the fruits were found as 5.5%. Twenty-two compounds representing 99.3% of the essential oil obtained from the fruits of H. crenatifolium were determined and the major components were identified as octanol and octyl acetate (3.1% and 88.4% respectively) by GC and GC–MS.