Improved oil treatment conditions for soft degumming

“Soft degumming” is a new physicochemical degumming process. It involves the complete elimination of phospholipids by using a chelating agent, EDTA, in the prescence of an emulsifying additive. To study the optimal cost of the process, a laboratory study was undertaken to find a method based on substituting the emulsifying additive by endogenous phospholipids. The phospholipids were first extracted from the oil by an initial hot-water treatment. In a second stage, a solution containing a chelating agent was incorporated. The mixture was then vigorously stirred to form an emulsion. The degummed oil was obtained after centrifugation. A comparative study carried out on several oils provided an indication of the efficiency of this alternative procedure. The phospholipid content of the processed oils was about 5 ppm phosphorus.     

Feasibility of recycled newspaper as cellulose source for regenerated cellulose membrane fabrication

An environmental friendly regenerated cellulose membrane (RCM) was successfully prepared via NaOH/urea aqueous solution system by utilizing recycled newspaper (RNP) as the cellulose source. The morphological and chemical structure of resulting membrane were characterized using scanning electron microscopy (SEM), atomic force microscopy (AFM), transmission electron microscopy (TEM), Fourier transform infrared (FTIR) spectroscopy, X‐ray diffraction (XRD) spectroscopy, and thermogravimetric analysis (TGA). Results from FTIR and XRD verified that the transparent RCM possesses cellulose II structure. SEM observation revealed that the transparent RCM consist of homogeneous dense symmetric membrane structure and composed of a skin layer with mean roughness parameter R_a, obtained from AFM analysis of 29.53 nm. Pure water flux, water content, water contact angle, porosity, and pore size of the resulting membrane were also measured. This study promotes the potential of the cellulose‐based membrane obtained from low cost cellulose source for application in filtration and separation system. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42684.     

Facile Synthesis of ZSM-5/TiO2/Ni Novel Nanocomposite for the Efficient Photocatalytic Degradation of Methylene Blue Dye

It is critical to develop an appropriate dye degrading technique to preserve the natural environment and human health owing to the dangerous water pollution caused by effluent dyes. So, in this work, a ZSM-5/TiO₂/Ni photocatalyst was synthesized as a novel composite and used for degrading methylene blue dye in the solution. The sol–gel approach was used to immobilize titanium dioxide nanoparticles on the ZSM-5 surface, and the resulting photocatalyst was then modified using nickel nanoparticles to improve its photocatalytic performance. The nanocomposite was characterized using different tools such as FE-SEM, EDX, XRD, FT-IR, TGA, and UV–Vis spectrophotometer. The XRD confirmed that the synthesized composite has the characteristic TiO₂ peaks. FE-SEM images of ZSM-5 exhibited rough, uneven, and jagged surfaces. A distinct shift in the morphology of the surface resulted when titanium dioxide was fully immobilized on the surface of ZSM-5. Shape complexity and surface roughness of the particles are elevated in the case of the ZSM-5/TiO₂/Ni nanocomposite. The maximum % degradation of 50 mL of 15 mg/L of methylene blue dye is 99.17% and achieved at pH?=?8, irradiation time?=?140 min, and photocatalyst dosage?=?0.05 g. The synthesized composite can be regenerated and reused several times without losing its efficacy.

     

Thermal Stability Investigation of Synthesized Epoxy-Polyurethane/Silica Nanocomposites

Silicon - In this research, epoxy polyurethane-nano silica nanocomposites have been synthesized using an in-situ method, for which SiO2 nanocomposites had been initially ready in N,...     

Determination of the mixing performance of sulzer SMV static mixers by laser induced fluorescence

Local concentrations are measured at the outlet of different configurations of Sulzer SMV static mixers placed in a tube. Laser Induced Fluorescence is the non intrusive technique used to measure mean and RMS concentrations. The two fluids mixed are miscible and the flow regime is turbulent. The influence of the number of elements, their position and the ratio between the velocities of the two compounds on the mixing is studied. The results show that these parameters are important for the quality of mixing. The velocity ratio influences the radial mixing, while the mixing length depends on the number and position of the elements.     

Evaluation of machinability and economic performance in cryogenic-assisted hard turning of α-β titanium: a step towards sustainable manufacturing

Abstract

Titanium, a difficult-to-cut material, consumes higher time and cost in removing material by machining to produce parts. Machining of Ti alloys has got serious attention owing to its reactive nature with tool materials at elevated temperature that aggravates tool wear. Reportedly, effective and efficient cooling and lubrication at the tool–work interface can ameliorate the machinability of Ti-alloys. In this perspective, this article interrogates the underlying mechanism of critical responses such as surface roughness, temperature, tool life and machining cost under dry, minimum quantity lubrication (MQL) and cryogenic liquid nitrogen (LN2) modes. The effect of cutting speeds and feed rates on such responses have been considered as a function of cooling strategy to standardize the cooling technique as the best alternative for machining. Cryogenic cooling seems to be preponderant regarding machining cost, temperature, surface roughness and tool life in hard turning of a–b titanium alloy. The feasibility of cryogenic cooling was investigated using the iso-response technique in comparison with dry and MQL-assisted hard turning. Experimental results revealed longer tool life and lower machining cost under cryogenic condition followed by MQL and dry machining. Moreover, cryogenic LN2 has been identified as an appropriate alternative to reduce the temperature and surface roughness. On contrary, dry turning evoked a high-temperature and rapid tool wear. In a nutshell, cryogenic assisted hard turning has acceded as a sustainable strategy from an environmental and economic perspective.     

Pollen morphological investigations of family Cactaceae and its taxonomic implication by light microscopy and scanning electron microscopy

The family Cactaceae is the diversified group of angiosperm plants whose pollen statistics has been used for taxonomic identification. In this article, we present the pollen morphology of eight species belong to seven taxonomically complex genera of Cactaceae including Astrophytum, Cylindropuntia, Echinocereus, Echinopsis, Mammillaria, Opuntia, and Thelocactus using light and scanning electron microscopy. The pollen grains were acetolyzed, measured, described, and electron photomicrographs were taken. Cactaceae can be characterized by presenting different palynomorphological features including pollen type, sculpturing, polar and equatorial diameter, aperture orientation, exine thickness, P/E ratio, and echini features. Four types of pollen shapes, that is, prolate spheroidal (three species), subprolate (two species), prolate (two species), and oblate spheroidal in Echinocereus reichenbachii were observed. The polar and equatorial diameter observed maximum in O. ficus indica 116.95 and 112.27 μm while minimum in M. compressa 38.42 and 21.05 μm. Pollen of two types, tricolpate in members of subfamily Cactioideae and pantoporate in the Opuntioideae were examined. The fertility percentage has been observed maximum in Opuntia macrocentra (83.84%) and minimum in Opuntia ficus‐indica (57.89%). Exine sculpturing showing great variations such as granulate, reticulate, granulate perforate and micro‐echinate foveolate ornamentation was examined only in Echinopsis eyriesii. A key to species, based on pollen micromorphological attributes, has been constructed for correct identification of complex cactus species.     

Systematics study through scanning electron microscopy; a tool for the authentication of herbal drug Mentha suaveolens Ehrh

In all over the world, herbal drugs are usually adulterated with similar species or varieties due to incorrect identification. Most of herbal products devoid purity and quality, therefore an attempt was carried out to identify plant species and authenticate its herbal drug products from Mentha suaveolens. Microscopy tools provide an excellent platform to identify plants at species level. In this study, microscopic and pharmacokinetic parameters of M. suaveolens were observed. Plant species were collected from high diverse areas of Northern Pakistan. Macro and micro‐morphology including palynology and anatomical features were analyzed to study M. suaveolens. Species characteristics were studied, while implementing microscopic techniques for the delimitation and identification of the species. Traditionally Mentha species are used to cure several diseases that is, digestive disorders, respiratory disorders. Micromorphology (stem, leaves, flowers structure, length etc.), palynology (shape, size of pollen etc.), and anatomical characters (types of stomata, epidermal cell shape, and trichomes) were studied. Micromorphology and anatomical characters were of great interest and significance to discuss the taxonomy of the species. Taxonomic characters were studied to characterize and authenticate the species. The aim of the present study is to observe in detail the taxonomic identification of the species in term of morphology, palynology, and foliar epidermal anatomy for the correct identification along with their medicinal uses in the area.     

A new convolution approach for the time-delay identification of systems with arbitrary entries

In this paper, an online delay identification approach of continuous-time linear systems with unstructured entries is achieved via a new algebraic technique. The arbitrary input and output trajectories are chosen with close and abundant crossing zero. Initial conditions and static disturbances are taken into account in the design of the identification approach. The proposed method is based on a distributional algebraic technique and a convolution approach. A proposed theorem is hence enounced to identify a single time-delay of such systems. The effectiveness of the proposed approach is demonstrated by an illustrative example. The obtained results show the high performances of the proposed time-delay identification approach in severe operation conditions of the considered system.     

Use of basalt in asphalt concrete mixes

One of the main reasons behind the appearance of early distresses in Jordan roads and the low surface skid resistance is the use of marginal quality limestone aggregate. Large quantities of good quality basalt are available in the Northeastern parts of Jordan. In this research, the possibility of improving the properties of local asphalt concrete mixes by replacing different portions of the normally used limestone aggregate by basalt was investigated. The replacement included total replacement of the limestone by basalt, replacing the coarse aggregate, and replacing the fine aggregate. Results showed that the optimal mix was the mix that had basalt coarse aggregate and limestone fine aggregate. In order to overcome the stripping potential of the optimal mix, 20% of the filler portion of the aggregate, material smaller than 0.075 mm, was replaced by lime. The optimal mix showed superiority, over the tested mixes, in all the evaluated properties, which were Marshall Stability, indirect tensile strength, stripping resistance, resilient modulus, dynamic creep, fatigue, and rutting.