Application results of a prototype ultrasonic liquid film sensor to a 7 MPa steam–water two-phase flow experiment

A prototype ultrasonic liquid film sensor was applied to a high-temperature steam–water two-phase flow experiment. The liquid film sensor was vertically installed in a loop which was connected to HUSTLE, a multi-purpose steam source test facility. The hydraulic diameter of the measurement section was 9.4 mm. The output waveforms of the sensor were acquired with a digital oscilloscope. The fluid temperature and system pressure were kept at 288 °C and 7.2 MPa, respectively, during the experiment. The pulse-echo method was used to calculate the liquid film thickness. The cross-correlation calculation was utilized to determine the time difference between the pulse reflected at the sensor surface and the pulse reflected at the liquid film surface. The time-averaged liquid film thicknesses were less than 0.055 mm in the annular flow condition. The increase of the time-averaged thickness was small with the change of the gas momentum flux. The film thicknesses measured with the sensor were compared with the past experimental results; the former were smaller than one-fourth of the thickness estimated as the mean film thickness. The comparison results suggested that the continuous liquid sublayer thickness was measured with the liquid film sensor.     

Detection of light-absorbing iron oxide particles using a modified single-particle soot photometer

Copyright © 2016 American Association for Aerosol Research     

Bioinspired Magnetite Crystallization Directed by Random Copolypeptides

Control over magnetite (Fe₃O₄) formation is difficult to achieve in synthetic systems without using non‐aqueous media and high temperatures. In contrast, Nature employs often intrinsically disordered proteins to tightly tailor the size, shape, purity, and organization of the nanocrystals to optimize their magnetic properties. Inspired by such “flexible polyelectrolytes,” here random copolypeptides having different amino acid compositions are used as control agents in the bioinspired coprecipitation of magnetite through a ferrihydrite precursor, following a recently developed mineralization protocol. Importantly, the copolypeptide library is designed such that the amino acid composition can be optimized to simultaneously direct the size of the nanoparticles as well as their dispersibility in aqueous media in a one‐pot manner. Acidic amino acids are demonstrated to regulate the crystal size by delaying nucleation and reducing growth. Their relative content thus can be balanced to tune between the superparamagnetic and ferrimagnetic regimes, and high contents of negatively charged amino acids result in colloidal stabilization of superparamagnetic nanoparticles at high pH. Conversely, with positively charged lysine‐rich copolypeptides ferrimagnetic crystals are obtained which are stabilized at neutral pH and self‐organize in chains, as visualized by cryo‐transmission electron microscopy. Altogether, the presented findings give important insights for the future development of additive‐mediated nanomaterial syntheses.     

A novel gene delivery system in plants with calcium alginate micro-beads

We have produced micrometer-sized calcium alginate beads referred to as "bio-beads" that encapsulate plasmid DNA molecules carrying a reporter gene. In order to evaluate the efficiency of the bio-beads in mediating genetic transfection, protoplasts isolated from cultured tobacco cells (BY-2) were transfected with bio-beads containing a plasmid that carries the modified green fluorescent protein gene CaMV35S-sGFP. With the bio-beads treatment, approximately ten-fold higher GFP expression was observed after 24 h incubation compared to that with the conventional method using a naked plasmid solution. Transfection was up to 0.22% efficient. These results indicate that bio-beads have a possibility for efficient transformation in plants.     

Pilot-Scale Operation of a Concrete Sludge Recycling Plant and Simultaneous Production of Calcium Carbonate

A pilot-scale plant to treat concrete sludge and produce calcium carbonate (CaCO₃) and an environmental purification agent (phosphorus adsorbent derived from concrete sludge, PAdeCS®) was designed, constructed, and operated. Concrete sludge from a concrete pile and pole production plant, boiler gas containing CO₂, and groundwater were used in the plant. The process involved calcium extraction from concrete sludge into water, followed by reaction of the calcium with CO₂ to produce crystalline CaCO₃. The pilot-scale plant was operated for 1 week, and the mass flows, conversion of CO₂ to CaCO₃, and net CO₂ emissions of the process were estimated. High-purity CaCO₃ (>97%) suitable for industrial use was obtained. Based on the power consumption of the process and the amount of CO₂ sequestered into CaCO₃, a net reduction in CO₂ emissions can be achieved using this process. The produced PAdeCS can be used as an inexpensive substitute for calcium series environmental purification agents.     

Oral Secretions Affect HIPVs Induced by Generalist (<Emphasis Type="Italic">Mythimna loreyi</Emphasis>) and Specialist (<Emphasis Type="Italic">Parnara guttata</Emphasis>) Herbivores in Rice

Plants synthesize variable mixtures of herbivore-induced plant volatiles (HIPVs) as part of their evolutionary conserved defense. To elucidate the impact of chewing herbivores with different level of adaptation on HIPV profiles in rice, we measured HIPVs released from rice seedlings challenged by either the generalist herbivore Mythimna loreyi (MYL) or the specialist Parnara guttata (PAG). Both herbivores markedly elicited the emission of HIPVs, mainly on the second and third days after attack compared to control plants. In addition, side-by-side HIPV comparisons using MYL and PAG caterpillars revealed that generalist feeding induced comparably more HIPVs relative to specialist, particularly on day two as highlighted by multivariate analysis (PLS-DA) of emitted HIPVs, and further confirmed in mimicked herbivory experiments. Here, mechanically wounded plants treated with water (WW) released more VOCs than untreated controls, and on top of this, oral secretions (OS) from both herbivores showed differential effects on volatile emissions from the wounded plants. Similar to actual herbivory, MYL OS promoted higher amounts of HIPVs relative to PAG OS, thus supporting disparate induction of rice indirect defenses in response to generalist and specialist herbivores, which could be due to the differential composition of their OS. (196 words).     

An absolute requirement of fructose 1,6-bisphosphate for the Lactobacillus caseiL-lactate dehydrogenase activity induced by a single amino acid substitution

Lactobacillus casei allosteric L-lactate dehydrogenase (L-LDH)absolutely requires fructose 1,6-bisphosphate [Fru(1,6)P2] forits catalytic activity under neutral conditions, but exhibitsmarked catalytic activity in the absence of Fru(1,6)P₂ underacidic conditions through the homotropic activation effect ofsubstrate pyruvate. In this enzyme, a single amino acid replacement,i.e. that of His205 conserved in the Fru(1,6)P₂-binding siteof certain allosteric L-LDHs of lactic acid bacteria with Thr,did not induce a marked loss of the activation effect of Fru(1,6)P₂or divalent metal ions, which are potent activators that improvethe activation function of Fru(1,6)P₂ under neutral conditions.However, this replacement induced a great loss of the Fru(1,6)P₂-independentactivation effect of pyruvate or pyruvate analogs under acidicconditions, consequently indicating an absolute Fru(1,6)P₂ requirementfor the enzyme activity. The replacement also induced a significantreduction in the pH-dependent sensitivity of the enzyme to Fru(1,6)P₂,through a slight decrease and increase of the Fru(1,6)P₂ sensitivityunder acidic and neutral conditions, respectively, indicatingthat His205 is also largely involved in the pH-dependent sensitivityof L.casei L-LDH to Fru(1,6)P₂. The role of His205 in the allostericregulation of the enzyme is discussed on the basis of the knowncrystal structures of L-LDHs.     

Quantitative risk assessment of noroviruses in drinking water based on qualitative data in Japan

Noroviruses are one of the major causes of viral gastroenteritis in Japan. A quantitative risk assessment was conducted to evaluate the health risk caused by this virus in drinking water. A Monte Carlo analysis was used to calculate both the probability of infection and the disease burden using disability-adjusted life years (DALYs). The concentration of noroviruses in tap water was estimated based on qualitative data and a most probable number (MPN) method with an assumed Poisson lognormal distribution. This numerical method was evaluated using two sets of available count data of Cryptosporidium: that collected from a river and that found in tap water in Japan. The dose-response relationships for noroviruses were estimated using assumed ID50 (10 or 100). The annual risk was higher than the US-EPA acceptable level (10(-4) [infection/ person-year]) but around the WHO level (10(-6) [DALYs/ person-year]). As suggested by others, since microbial concentrations are generally lognormally distributed, the arithmetic mean was directly related to the annual risk, suggesting that the arithmetic mean is more useful in representing the degree of microbial contamination than the geometric mean.     

Identification of Pseudozyma graminicola CBS 10092 as a producer of glycolipid biosurfactants, mannosylerythritol lipids

A basidiomycetous yeast, Pseudozyma graminicola CBS 10092, was found to accumulate a large amount of glycolipids in the cultured medium when grown on soybean oil as the sole carbon source. Based on thin layer chromatography, the extracellular glycolipids gave spots corresponding to those of mannosylerythritol lipids (MELs), which are highly functional and promising biosurfactants. From the structural characterization by 1H and 13C NMR, the main product was identified as 4-O-[(4'-mono-O-acetyl-2', 3'-di-O-alka(e)noyl)-beta-D-mannopyranosyl]-D-erythritol, which is a highly hydrophilic derivative of MELs known as MEL-C. According to high-performance liquid chromatography analysis, the main product, MEL-C, comprised approximately 85% of all the MELs, and the total amount reached approximately 10 g/L for 7 days. The fatty acids of the present MEL-C consisted of mainly C6, C8 and C14 acids, considerably different from those of MEL-C produced by other Pseudozyma strains such as P. antarctica and P. shanxiensis. The observed critical micelle concentration (CMC) and the surface-tension at CMC of the MEL-C were 4.0 x 10(-6) M and 24.2 mN/m, respectively, while those of MEL-A, the most intensively studied MEL, were 2.7 x 10(-6) M and 28.4 mN/m, respectively. This implied that the MEL-C has higher hydrophilicity than conventional MELs hitherto reported. In addition, on a water-penetration scan, the MEL-C efficiently formed the lamella phase (Lalpha) at a wide range of concentrations, indicating its excellent self-assembling properties. From these results, the newly identified MELs produced by P. graminicola are likely to have great potential for use in oil-in-water type emulsifiers and/or washing detergents, and would thus facilitate a broad range of applications for the promising yeast biosurfactants.     

An integrated control method for a wind farm to reduce frequency deviations in a small power system

Output power of wind turbine generator (WTG) is not constant and fluctuates due to wind speed changes. To reduce the adverse effects of the power system introducing WTGs, there are several published reports on output power control of WTGs detailing various researches based on pitch angle control, variable speed wind turbines, energy storage systems, and so on. In this context, this paper presents an integrated control method for a WF to reduce frequency deviations in a small power system. In this study, the WF achieves the frequency control with two control schemes: load estimation and short-term ahead wind speed prediction. For load estimation in the small power system, a minimal-order observer is used as disturbance observer. The estimated load is utilized to determine the output power command of the WF. To regulate the output power command of the WF according to wind speed changing, short-term ahead wind speed is predicted by using least-squares method. The predicted wind speed adjusts the output power command of the WF as a multiplying factor with fuzzy reasoning. By means of the proposed method, the WF can operate according to the wind and load conditions. In the WF system, each output power of the WTGs is controlled by regulating each pitch angle. For increasing acquisition power of the WF, a dispatch control method also is proposed. In the pitch angle control system of each WTG, generalized predictive control (GPC) is applied to enhance the control performance. Effectiveness of the proposed method is verified by the numerical simulations.