High-velocity fluidization of solid particles in a liquid-solid circulating fluidized bed system

Particulate and aggregative fluidizations in a liquid-solid circulating fluidized bed system are characterized by chaotic time series analysis of local voidage and heat transfer fluctuations in terms of the correlation dimension and Kolmogorov entropy. Both correlation dimension and Komogorov entropy of the voidate fluctuation are found to decrease with decreasing bed voidage in both fluidization regimes, suggesting the suppression of chaotic motion of individual particles due to high solid concentration. The correlation dimension of the heat transfer fluctation in the aggregative fluidization regime is higher than that in the particulate fluidization regime. This reflects the complex convective motion of liquid and solid phases induced by the formation of the liquid streaks and aggregates of particles.     

Roles of inherent metallic species in secondary reactions of tar and char during rapid pyrolysis of brown coals in a drop-tube reactor

Two pairs of raw and acid-washed coal samples were prepared from Yallourn and Loy Yang brown coals, and subjected to rapid pyrolysis in a drop-tube reactor at 1073-1173 K in a stream of N₂ or H₂O/N₂ mixture. Examinations were made on the roles of the inherent metallic species in the secondary reactions of nascent tar and char that were formed by the intraparticle primary reactions. The experimental results revealed that the inherent metallic species were essential for vary rapid steam reforming/gasification of the nascent tar/char and simultaneous suppression of soot formation. In the absence of the metallic species, the soot formation from the tar accounted as much as 15-19 and 6-13% of the carbon in coal in N₂ and H₂O/N₂, respectively. The metallic species reduced the yield of soot to 6-8% in N₂ by enhancing the reforming of tar by H₂O generated from the pyrolysis of coal. In the H₂O/N₂ stream, instead of soot formation, a net gasification conversion up to 17% within 4.3 s was observed in the presence of the metallic species as a result of catalytic gasification of the nascent char. Moreover, the metallic species catalyzed the steam reforming of the nascent tar, giving its conversion up to 99%. Over the range of the conditions employed, a one-to-one stoichiometry was established between the steam consumption and the yield of carbon oxides formed by the steam reforming/gasification and water-gas-shift reaction.     

An absolute requirement of fructose 1,6-bisphosphate for the Lactobacillus caseiL-lactate dehydrogenase activity induced by a single amino acid substitution

Lactobacillus casei allosteric L-lactate dehydrogenase (L-LDH)absolutely requires fructose 1,6-bisphosphate [Fru(1,6)P2] forits catalytic activity under neutral conditions, but exhibitsmarked catalytic activity in the absence of Fru(1,6)P₂ underacidic conditions through the homotropic activation effect ofsubstrate pyruvate. In this enzyme, a single amino acid replacement,i.e. that of His205 conserved in the Fru(1,6)P₂-binding siteof certain allosteric L-LDHs of lactic acid bacteria with Thr,did not induce a marked loss of the activation effect of Fru(1,6)P₂or divalent metal ions, which are potent activators that improvethe activation function of Fru(1,6)P₂ under neutral conditions.However, this replacement induced a great loss of the Fru(1,6)P₂-independentactivation effect of pyruvate or pyruvate analogs under acidicconditions, consequently indicating an absolute Fru(1,6)P₂ requirementfor the enzyme activity. The replacement also induced a significantreduction in the pH-dependent sensitivity of the enzyme to Fru(1,6)P₂,through a slight decrease and increase of the Fru(1,6)P₂ sensitivityunder acidic and neutral conditions, respectively, indicatingthat His205 is also largely involved in the pH-dependent sensitivityof L.casei L-LDH to Fru(1,6)P₂. The role of His205 in the allostericregulation of the enzyme is discussed on the basis of the knowncrystal structures of L-LDHs.     

Enhanced Development of Azoxymethane-Induced Colonic Preneoplastic Lesions in Hypertensive Rats

Metabolic syndrome is associated with an increased risk of colorectal cancer. This study investigated the impact of hypertension, a component of metabolic syndrome, on azoxymethane (AOM)-induced colorectal carcinogenesis using SHRSP/Izm (SHRSP) non-diabetic/hypertensive rats and SHRSP.Z-Lepr^fa/IzmDmcr (SHRSP-ZF) diabetic/hypertensive rats. Male 6-week-old SHRSP, SHRSP-ZF, and control non-diabetic/normotensive Wister Kyoto/Izm (WKY) rats were given 2 weekly intraperitoneal injections of AOM (20 mg/kg body weight). Two weeks after the last injection of AOM, the SHRSP and SHRSP-ZF rats became hypertensive compared to the control WKY rats. Serum levels of angiotensin-II, the active product of the renin-angiotensin system, were elevated in both SHRSP and SHRSP-ZF rats, but only the SHRSP-ZF rats developed insulin resistance, dyslipidemia, and hyperleptinemia and exhibited an increase in adipose tissue. The development of AOM-induced colonic preneoplastic lesions and aberrant crypts foci, was significantly accelerated in both SHRSP and SHRSP-ZF hypertensive rats, compared to WKY normotensive rats. Furthermore, induction of oxidative stress and exacerbation of inflammation were observed in the colonic mucosa and systemically in SHRSP and SHRSP-ZF rats. Our findings suggest that hypertension plays a role in the early stage of colorectal carcinogenesis by inducing oxidative stress and chronic inflammation, which might be associated with activation of the renin-angiotensin system.     

Supramolecular morphology of two-step melt-spun poly(dioxanone) fibers

Structure of poly(dioxanone) (PPDX) fibers produced through a two-step melt-spinning process with an additional short-period annealing above the melting temperature of PPDX was investigated and the effect of annealing on the degradation behavior was discussed. The morphological study carried out by etching the fibers using a phosphate or permanganate solution suggested that the fibers take a skin–core structure, and both the skin layer and the core region consist of a bundle of microfibrils. The micro-beam X-ray diffraction analysis revealed that the short-period annealing in the production process only slightly promotes the crystallization in the skin layer but contributes to increasing the packing of amorphous chains near the skin, which seems to be the controlling factor of the hydrolytic degradation behavior of the fibers.     

Optical manipulation of multiple stable states in photorefractive four-wave mixing

Abstract

We propose an approach to manipulate the convergence in multiple solutions of phase conjugate reflectivity in photorefractive four-wave mixing. Although a method forcibly adding a π-phase shift to an incident beam has been already proposed to control the reflectivity, some restrictions have been required in the boundary conditions for the successful operation. Here, we control the reflectivity with the boundary conditions in which the phase shift operation is ineffective by itself. In our method, the phase shift operation is combined with the procedure of turning an incident beam on and off. With a numerical analysis of four-wave mixing, we show that our new approach brings drastic change in the spatial distribution of the index grating and leads the phase conjugate reflectivity which was not manipulated previously.     

A Method for Reducing the Dead‐Time Voltage and Impedance Voltage in a Series Voltage Compensator

Many research groups are developing series voltage compensators. In a series converter, since a transformer is used in series in the power system, the power system current flows into the voltage source inverter through the transformer. The inverter current, which is determined by the transformation ratio, gives rise to an error voltage that consists of a dead‐time voltage and an impedance voltage. The error voltage is generated even when the reference voltage is zero. This paper describes the mechanism by which the error voltage occurs and proposes a method for reducing the error voltage. © 2013 Wiley Periodicals, Inc. Electr Eng Jpn, 186(3): 85–93, 2014; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.22333     

General topology optimization method with continuous and discrete orientation design using isoparametric projection

A general topology optimization method, which is capable of simultaneous design of density and orientation of anisotropic material, is proposed by introducing orientation design variables in addition to the density design variable. In this work, the Cartesian components of the orientation vector are utilized as the orientation design variables. The proposed method supports continuous orientation design, which is out of the scope of discrete material optimization approaches, as well as design using discrete angle sets. The advantage of this approach is that vector element representation is less likely to fail into local optima because it depends less on designs of former steps, especially compared with using the angle as a design variable (Continuous Fiber Angle Optimization) by providing a flexible path from one angle to another with relaxation of orientation design space. An additional advantage is that it is compatible with various projection or filtering methods such as sensitivity filters and density filters because it is free from unphysical bound or discontinuity such as the one at θ = 2π and θ = 0 seen with direct angle representation. One complication of Cartesian component representation is the point‐wise quadratic bound of the design variables; that is, each pair of element values has to reside in a given circular bound. To overcome this issue, we propose an isoparametric projection method, which transforms box bounds into circular bounds by a coordinate transformation with isoparametric shape functions without having the singular point that is seen at the origin with polar coordinate representation. A new topology optimization method is built by taking advantage of the aforementioned features and modern topology optimization techniques. Several numerical examples are provided to demonstrate its capability. Copyright © 2014 John Wiley & Sons, Ltd.