Output power dispatch control for a wind farm in a small power system

Nowadays, a wind turbine generator (WTG) is required to provide control capabilities as the output power of WTG fluctuates. Under this scenario, this paper proposes an output power control method of a wind farm (WF) connected to a small power system using pitch angle control. In this control approach, the WF output power control is achieved by two control levels: central and local. In the central control, the WF output power command is determined by considering the frequency deviations and wind speeds using a fuzzy function. Then, the local output power commands for each of the WTGs are based on the proposed dispatch control. In the proposed dispatch control, the output commands of each WTG are determined by considering wind conditions for each of the WTGs. The simulation results by using an actual detailed model for the wind power system show the effectiveness of the proposed method. Copyright © 2010 John Wiley & Sons, Ltd.     

Recovery of Precious and Base Metals from Waste Printed Circuit Boards Using a Sequential Leaching Procedure

This paper considers the issue of recycling of waste printed circuit boards (WPCBs) containing precious and base metals in appreciable amounts. High-pressure oxidative leaching (HPOL) with dilute sulfuric acid resulted in removal of a significant amount of base metals from a WPCB ash sample obtained by incineration at 800°C. The parameters investigated in the precious metal leaching from WPCB residue after HPOL included the sulfuric acid concentration, thiourea concentration, oxidant concentration, leaching temperature, and leaching time. Recovery of gold, silver, and palladium of 100%, 81%, and 13% from the WPCB residue sample was achieved by thiourea leaching under optimized conditions. The results show that the efficiency of precious metal dissolution from the WPCB sample using thiourea solution depended strongly on the concentration of both thiourea and oxidant.     

Synthesis and Photocrosslinking Reaction of N-Allylcarbamoylmethyl Cellulose Leading to Hydrogel

Summary The reaction of the carboxymethyl cellulose sodium salt (Na-CMC) (degrees of substitution (DS) = 1.2) with N-hydroxysuccinimide (Su-OH) in the presence of 1-hydroxybenzotriazole and 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide (EDC) was carried out in water to obtain the Su-OH ester of carboxymethyl cellulose, Su-CMC, with the DS values of 0.19 – 1.04. N-Allylcarbamoylmethyl cellulose (Allyl-CMC), which was prepared from the reaction of Su-CMC with an excess amount of allylamine, was crosslinked by UV-irradiation. In addition, the photocrosslinked Allyl-CMC film was swollen with water to form a hydrogel having a relatively high water-swelling property, e.g., the degree of swelling (ds) was ca. 360% for Allyl-CMC with the DS of 0.93.     

Enhanced production of hydroxymethylfurfural from fructose with solid acid catalysts by simple water removal methods

This paper demonstrates two simple ways to increase 5-hydroxymethylfurfural (HMF) yield (selectivity) in fructose dehydration with various solid acid catalysts. One is a water removal from the reaction mixture by a mild evacuation at 0.97 × 10⁵ Pa; it increases HMF yield for various catalysts (heteropoly acid, zeolite, and acidic resin). The removal of water suppresses two undesired reactions: the hydrolysis of HMF to levulinic acid and the reaction of partially dehydrated intermediates to condensation products. The other method is a decrease in the particle (bead) size of the resin (Amberlyst-15). The crushed and sieved Amberlyst-15 powder in a size of 0.15–0.053 mm shows 100% HMF yield at high fructose concentration (50 wt.% in DMSO), which is to our knowledge the highest yield to date. Near-infrared spectroscopic characterization of adsorbed water suggests that the enhanced yield can be caused by an improved removal of adsorbed water in a small-size resin particle.     

液化场地桩-土-结构动力相互作用的有限元分析

基于Biot两相饱和多孔介质动力耦合理论,采用有效应力方法对液化场地桩基础的地震反应进行了三维有限元分析。在饱和液化砂土的循环塑性模拟中,采用了超固结边界面、Armstrong-Frederick型非线性运动硬化准则和非关联流动准则来描述动荷载作用下砂土的循环活动性以及液化强度等特性。对于桩的动力本构行为,则采用了可以考虑体积效应和轴向力影响的梁-柱单元来模拟。以某城市高架桥的实际工程为例,应用该方法对地基液化时桩-土-结构的动力相互作用进行了计算分析,并得到了一些有用的结论。     

Experimental study of neutron counting in a zero-power reactor driven by a neutron source inherent in highly enriched uranium fuels

Even a zero-power reactor core containing highly enriched uranium has a weak neutron source inherent in uranium 235, and consequently, a neutron counter placed closely to the core without external neutron source registers a certain counting rate. The study of the counting is very important for zero-power reactor physics experiments with a high precision. In this experimental study, first, at a shutdown state of the UTR-Kinki reactor without start-up neutron source, a pulse height distribution of output signals from a neutron proportional counter was measured to confirm that these signals resulted from neutron detections. At several subcritical states of the UTR, then, the Feynman-α analysis was carried out to confirm that the neutrons detected by the counter must be fission neutrons multiplied by fission chain reactions. The correlation amplitude measured in the Feynman-α analysis was much higher than that measured in a previous drive by start-up source. Further, it was also confirmed that the subcriticality dependence of neutron counting rate followed the source multiplication formula. This feature indicated that the one-point model was very successful in the subcritical range including the shutdown state.     

Effect of treatment of activated carbon fiber cloth electrodes with cold plasma upon performance of electric double-layer capacitors

Charge/discharge behavior of electric double-layer capacitors composed of activated carbon fiber cloth (ACFC) electrodes and an organic electrolyte was investigated. The modification of the ACFC electrodes was performed using cold plasma generated in argon-oxygen atmosphere. The effect of the cold plasma treatment of the ACPC electrodes on the capacitor performance was discussed on the basis of the physical and chemical properties of the ACFC surface such as pore radius distribution and surface atom concentration.     

Effects of difructose anhydride III (DFA III) administration on rat intestinal microbiota

The effects of difructose anhydride III (di-D-fructofuranose-1,2':2,3'-dianhydride; DFA III) administration (3% DFA III for 4 weeks) on rat intestinal microbiota were examined using denaturing gradient gel electrophoresis (DGGE). According to DGGE profiles, the number of bacteria related to Bacteroides acidofaciens and uncultured bacteria within the Clostridium lituseburense group decreased, while that of bacteria related to Bacteroides vulgatus, Bacteroides uniformis and Ruminococcus productus increased in DFA III-fed rat cecum. In the cecal contents of DFA III-fed rats, a lowering of pH and an increase in short chain fatty acids (SCFAs), especially acetic acid, were observed. The DFA III-assimilating bacterium, Ruminococcus sp. M-1, was isolated from the cecal contents of DFA III-fed rats. The strain had 98% similarity with R. productus ATCC 27340T (L76595), and mainly produced acetic acid. These results confirmed that the bacteria harmful to host health were not increased by DFA III administration. Moreover, DFA III stimulated the growth of Ruminococcus sp. M-1 producing acetic acid, which may alter the intestinal microbiota towards a healthier composition. It is expected that DFA III would be a new candidate as a prebiotic.     

Intermittent administration of brain-derived neurotrophic factor (BDNF) ameliorates glucose metabolism and prevents pancreatic exhaustion in diabetic mice

We previously demonstrated that repetitive administration of brain-derived neurotrophic factor (BDNF) ameliorates glucose metabolism and energy expenditure in obese diabetic db/db mice. However, we have not evaluated in detail the effect of single or intermittent BDNF administration on glucose metabolism in a diabetic animal model. The objectives of this study were to examine the dose-response effect and dosing interval of BDNF administration in db/db mice and to evaluate the effect of intermittent BDNF administration on pancreatic function in db/db mice. We evaluated the dose-response effect of BDNF by single administration in db/db mice. First, single administration of BDNF greater than 70 mg/kg significantly reduced blood glucose concentration one day after administered, and the BDNF effect was maintained for 6 d. Next, the effects of BDNF administered twice a week at 4, 10, 25, and 62.5 mg/kg on blood glucose concentration, and the effects of BDNF administered once a week at 10, 20, 30, 50, and 70 mg/kg on blood glucose concentration were examined in db/db mice. In the intermittent treatment studies, BDNF dose-dependently ameliorated glucose metabolism by not only the twice-a-week administration but also the once-a-week administration. Lastly, because BDNF reduces the food intake of obese hyperphagic diabetic mice, the effects of BDNF administered once or twice a week on the blood glucose concentration and plasma and pancreatic insulin concentrations in db/db mice were compared with those of the vehicle under pair-fed conditions. Under pair-fed conditions, the intermittent administration of BDNF (25 mg/kg, twice a week, or 50 mg/kg, once a week) significantly reduced the blood glucose concentration and increased the plasma and pancreatic insulin concentrations compared with those in the pair-fed vehicle-treated db/db mice. This indicates that the prolonged hypoglycemic effect of BDNF is not simply due to the reduction of food intake. In conclusion, we demonstrated that the intermittent administration of BDNF ameliorates glucose metabolism and prevents pancreatic exhaustion in obese diabetic mice. These findings indicate that BDNF may have potential as a unique hypoglycemic agent for the treatment of diabetes at a fundamental level with good patient compliance.     

Multifunctional Initiator with Platinum-Acetylide Dendritic Core for Living Polymerization of Isocyanides

A novel multifunctional initiator has been developed by peripheral modification of a Pt-acetylide dendrimer. Pd–Pt μ-ethynediyl units were introduced to the first-generation dendrimer by a divergent method. The dendritic initiator was applicable to the living polymerization of aryl isocyanides, producing high molecular weight polymers with a narrow polydispersity index in quantitative yields. The ³¹P NMR spectrum of the resulting polymer suggested that all Pd–Pt μ-ethynediyl units in the dendritic molecule actually functioned as an initiator.