Impedancemetric gas sensor based on Pt and WO3 co-loaded TiO2 and ZrO2 as total NOx sensing materials

Pt-loaded metal oxides [WO₃/ZrO₂, MO_x/TiO₂ (MO_x = WO₃, MoO₃, V₂O₅), WO₃ and TiO₂] equipped with interdigital Au electrodes have been tested as a NO_x (NO and NO₂) gas sensor at 500 °C. The impedance value at 4 Hz was used as a sensing signal. Among the samples tested, Pt-WO₃/TiO₂ showed the highest sensor response magnitude to NO. The sensor was found to respond consistently and rapidly to change in concentration of NO and NO₂ in the oxygen rich and moist gas mixture at 500 °C. The 90% response and 90% recovery times were as short as less than 5–10 s. The impedance at 4 Hz of the present device was found to vary almost linearly with the logarithm of NO_x (NO or NO₂) concentration from 10 to 570 ppm. Pt-WO₃/TiO₂ showed responses to NO and NO₂ of the same algebraic sign and nearly the same magnitude, while Pt/WO₃ and WO₃/TiO₂ showed higher response to NO than NO₂. The impedance at 4 Hz in the presence of NO for Pt-WO₃/TiO₂ was almost equal at any O₂ concentration examined (1–99%), while in the case of Pt/WO₃ and WO₃/TiO₂ the impedance increased with the oxygen concentration. The features of Pt-WO₃/TiO₂ are favorable as a NO_x sensor that can monitor and control the NO_x concentration in automotive exhaust. The effect of WO₃ loading of Pt-WO₃/ZrO₂-based sensor is studied to discuss the role of surface W-OH sites on the NO_x sensing.     

Fabrication of large area diffraction grating using LIGA process

X-ray imaging is a very important technology in the fields of medical, biological, inspection, material science, etc. However, it is not enough to get the clear X-ray imaging with low absorbance. We have produced a diffraction gratings for obtaining high resolution X-ray phase imaging, such as X-ray Talbot interferometer. In this X-ray Talbot interferometer, diffraction gratings were required to have a fine, high accuracy, high aspect ratio structure. Then, we succeeded to fabricate a high aspect ratio diffraction grating with a pitch of 8 μm and small area using a deep X-ray lithography technique. We discuss that the diffraction gratings having a narrow pitch and an large effective area to obtain imaging size of practical use in medical application. If the pitch of diffraction gratings were narrow, it is expected high resolution imaging for X-ray Talbot interferometer. We succeeded and fabricated the diffraction grating with pitch of 5.3 μm, Au height of 28 μm and an effective area of 60 × 60 mm².     

High-aspect-ratio through-hole array microfabricated in a PMMA plate for monodisperse emulsion production

Microchannel (MC) emulsification is a promising technique for producing monodisperse emulsions consisting of highly uniform droplets. The authors developed a high-aspect-ratio microstructure (HARMST) made of poly(methyl methacrylate) (PMMA) as a new MC emulsification device. A PMMA straight-through MC array plate consisting of 31,250 through-holes with a 7.3 × 22.9-μm oblong section and a 200-μm depth was fabricated by a process of synchrotron radiation (SR) lithography and etching. Oblong MCs fabricated in a PMMA straight-through MC array were highly uniform with a coefficient of variation of less than 2%. The fabricated PMMA straight-through MC array plate was used to produce water-in-oil (W/O) emulsions. Monodisperse W/O emulsions with average droplet diameters of approximately 25 μm and a minimum coefficient of variation of 3.2% were produced via a hydrophobic PMMA straight-through MC array. The PMMA straight-through MC array plate also produced monodisperse W/O emulsions at droplet production rates of up to 1.7 × 10⁴/s. The PMMA straight-through MC array plates developed in this work are expected to expand the application field of emulsification using straight-through MC array plates, which have previously been made of single-crystal silicon.     

Fabrication of 5.8‐in. OTFT‐driven flexible color AMOLED display using dual protection scheme for organic semiconductor patterning

Abstract— A 5.8‐in. wide‐QQVGA flexible color active‐matrix organic light‐emitting‐diode (AMOLED) display consisting of organic thin‐film transistors (OTFTs) and phosphorescent OLEDs was fabricated on a plastic film. To reduce the operating voltage of the OTFTs, Ta₂O₅ with a high dielectric constant was employed as a gate insulator. Pentacene was used for the semiconductor layer of the OTFTs. This layer was patterned by photolithography and dry‐etched using a dual protection layer of poly p‐xylylene and SiO₂ film. Uniform transistor performance was achieved in the OTFT backplane with QQVGA pixels. The RGB emission layers of the pixels were formed by vacuum deposition of phosphorescent small molecules. The resulting display could clearly show color moving images even when it was bent and operated at a low driving voltage (below 15 V).     

Nonequilibrium dynamics of a reacting network system

The nonlinear nonequilibrium properties of reacting network systems are studied by computer simulations. It is shown that the fluctuation in the population of each chemical species obeys a log-normal distribution, not the normal Gaussian distribution. The reaction rate shows power-law decay with activation cost (energy), not the Arrhenius-type exponential decay observed in a linear nonequilibrium regime. These two characteristic features will explain the diversity, plasticity, and adaptivity observed in complex biological reaction networks. This work was presented in part at the 13th International Symposium on Artifical Life and Robotics, Oita, Japan, January 31–February 2, 2008     

Closed-form forward kinematics solutions of a 4-DOF parallel robot

It is well known that the forward kinematics of parallel robots is a very difficult problem. Closed-form forward kinematics solutions have been reported only to a few special classes of parallel robots. This paper presents closed-form forward kinematics solutions of a 4-DOF parallel robot H4. A 16th order polynomial in a single variable is derived to solve the forward kinematics of the H4. The 16 roots of the polynomial lead to at most 16 different forward kinematics solutions. A numerical verification is also presented.     

Production of monodisperse water-in-oil emulsions consisting of highly uniform droplets using asymmetric straight-through microchannel arrays

This paper reports the production of monodisperse water-in-oil (W/O) emulsions using new microchannel emulsification (MCE) devices, asymmetric straight-through MC arrays that were hydrophobically modified. The silicon asymmetric straight-through MC arrays consisted of numerous pairs of microslots and circular microholes whose cross-sectional sizes were 10 μm. This paper primarily focused on investigating the effect of the osmotic pressure of a dispersed phase (Π_d) on MCE. This paper also investigated the effects of the type of continuous-phase oils and the dispersed-phase flux (J _d) on MCE. The dispersed phases were Milli-Q water and Milli-Q water solutions containing sodium chloride. The continuous phases were decane (as control), hexane, medium chain triacylglyceride (MCT), and refined soybean oil (RSO) solutions containing tetraglycerin monolaurate condensed ricinoleic acid ester (TGCR) as a surfactant. At Π_d of exceeding threshold, highly uniform aqueous droplets with coefficients of variation of less than 3% were stably generated via hydrophobic asymmetric straight-through MCs. Monodisperse W/O emulsions with average droplet diameters between 32 and 45 μm were produced using the alkane–oil and triglyceride–oil solutions as the continuous phase. This work also demonstrated that the hydrophobic asymmetric straight-through MC array had remarkable ability to produce highly uniform aqueous droplets at very high J _d of up to 1,200 L m⁻² h⁻¹.     

Stabilization of geometrically nonlinear topology optimization by the Levenberg–Marquardt method

This paper deals with the design of compliant mechanisms in a continuum-based finite-element representation. Because the displacements of mechanisms are intrinsically large, the geometric nonlinearity is essential for designing such mechanisms. However, the consideration of the geometric nonlinearity may cause some instability in topology optimization. The problem is in the analysis part but not in the optimization part. To alleviate the analysis problem and eventually stabilize the optimization process, this paper proposes to apply the Levenberg–Marquardt method to the nonlinear analysis of compliant mechanisms.     

Usefulness of newly developed 99mTc-labeled STA-R12 for tumor imaging

We synthesized four new tumor imaging agents, 99mTc-labeled metalloporphyrins (99mTc-STA-R12, -STA-R21, -STA-RN101 and -ATN-12) for the tumor imaging. We compared the differences of tumor imaging potency among these agents in CDF1 mice implanted with colon 26 tumor. Tumor images with these agents were obtained by using digital gamma-camera (RC135-E, Hitachi, Tokyo) and the biodistributions were analyzed by computerized medical radionuclide imageanalyser (RP-200, Hitachi, Tokyo). The highest tumor organ ratio and the excellent tumor image were obtained by 99mTc-STA-R12 (13,17-Bispropanyl aspartic acid-3-ethenyl-8-[N,N',N",N"-tetrakis (carboxylmethyl-2,7,12,18-tetramethyl-porphyrinato]-manga nes e(III). The maximum concentration of 99mTc-STA-R12 in tumor tissue was observed at around 120 minutes after i.v. injection. On the contrary, the uptake rates of other organs and tissues such as liver, brain, muscle, lung, bone and blood continuously decreased. The rapid accumulation of STA-R12 in cancer tissue and the clearance from other tissue suggested a potential usefulness of this compound for tumor imaging agent.     

Evidence for a Jahn-Teller distortion of Cs2NaHoCl6 at 150 mK observed by X-ray diffractometry

By means of SR X-ray diffractometry, cooperative Jahn-Teller distortion as a structural phase transformation of the first kind is directly confirmed by a splitting of Laue spots. It is understood that the degenerate ground state of a nonmagnetic doublet (₃) of Ho³⁺ in a cubic Ho-elpasolite, Fm3m(O _h ⁵ ), at least above 600 mK, is lifted up by a distortion below 150 mK, which was predicted by a splitting of the NQR spectrum and anomalies in the specific heat and magnetic susceptibility. This structural transformation shows not only the lowest transition temperature up to now, but also the greatest hysteresis specified by a Schottky-type excitation. The magnitude of the relative distortion (1/1) has been roughly estimated to be on the 2.0 · 10^–3 order of magnitude, which is much larger than the predicted value obtained from a point charge approximation. The pecularities of this transition are discussed from the viewpoint that the general theory of a structural transformation, established convincingly at high temperatures could not be easily applied.