Supercritical fluid extraction of fungal oil using CO2, N2O,CHF3 and SF6

The extraction of oil from fungi (Mortierella ramanniana var.angulispora) was studied using carbon dioxide (CO₂), nitrous oxide (N₂O), trifluoromethane (CHF₃) and sulfur hexafluoride (SF₆) under supercritical conditions. The oil solubility was highest in SC-N₂O followed by SC-CO₂, while both SC-CHF₃ and SC-SF₆ showed poorer solvent power. The recorded oil solubilities at 333 K and 24.5 MPa were 2.3 wt% in N₂O, 0.48 wt% in CO₂, 0.0099 wt% in CHF₃ and 0.0012 wt% in SF₆. The oil solubilities in SC-N₂O and SC-CO₂ were measured over the pressure range 15.7–29.4 MPa and at temperatures ranging from 313–353 K. N₂O always showed greater solvent power than did CO₂ at the same temperature and pressure. The solvent power of a supercritical fluid increases with density at a given temperature, and increases with temperature at constant density. The change in neutral lipid composition of the extracted oil with the extraction ratio was measured. Free fatty acids or diglycerides were extracted more easily than triglycerides or sterol esters. The change in fatty acid composition was also measured. The proportion of γ-linolenic acid in the extract remained constant throughout the extraction.     

Surface activity of the lipid products hydrolyzed with lipase and phospholipase A-2

We examined thein vitro surface activity, immersional wettability and adhesional wettability shown by aqueous solutions of soy lysophospholipid (SLP)/monoglyceride (MG)/fatty acid (FA), SLP/FA and SLP/MG, and found that many lipid mixtures showed significant surface activity when their MG and FA components consisted of polyunsaturated FA and/or medium chain FA. The more unsaturated the FA, the higher the surface activity. A mixture of SLP/medium chain fatty acid MG (medium chain MG)/medium chain FA showed the highest surface activity, and was comparable to an Aerosol-OT surfactant, the most effective wetting agent. SLP/polyunsaturated FA monoglyceride (polyunsaturated MG)/polyunsaturated FA, SLP/medium chain FA, and SLP/polyunsaturated FA, SLP/medium chain MG, and SLP/polyunsaturated MG also showed a high degree of activity. Wettability decreased rapidly when the amount of saturated, long chain FA moieties increased. It is recognized that the degrees of unsaturation and the chain length of FAs in the lipid mixtures have a decisive influence on surface activities. Higher ratios of MG and FA to SLP gave higher activity; and solubilizers such as bile salts were necessary to dissolve them in water.     

Synthesis and characterization of poly(N-tert-alkylmaleimide)s

N-tert-Butylmaleimide (tBMI) polymerized readily in the presence of a radical initiator in spite of its bulky N-substituent to give a high molecular weight and less-flexible poly(substituted methylene). From kinetic investigation for the polymerization of tBMI with 2,2-azobisisobutyronitrile (AIBN) in benzene, it was revealed that the rate of polymerization (R _p) was expressed as R _p=k [AIBN]^0.51[tBMI]^1.4, and the overall activation energy was 99.6 kJ/mol. The high polymerization of tBMI was assumed to result from the decrease in the rate of bimolecular termination between rigid polymer radicals bearing a bulky substituent. The flexibility of the polymer chain was examined by the viscometric and light scattering methods, and the effect on the polymerization reactivity was discussed.     

Toughening of Silicon Nitride Matrix Composites by the Addition of Both Silicon Carbide Whiskers and Silicon Carbide Particles

Si₃N₄ matrix composites reinforced by SiC whiskers, SiC particles, or both were fabricated using the hot-pressing technique. The mechanical properties of the composites containing various amounts of these SiC reinforcing materials and different sizes of SiC particles were investigated. Fracture toughness of the composites was significantly improved by introducing SiC whiskers and particles together, compared with that obtained by adding SiC whiskers or SiC particles alone. On increasing the size of the added SiC particles, the fracture toughness of the composites reinforced by both whiskers and particles was increased. Their fracture toughness also showed a strong dependence on the amount of SiC particles (average size 40 μm) and was a maximum at the particle content of 10 vol%. The maximum fracture toughness of these composites was 10.5 MPa·m^1/2 and the flexural strength was 550 MPa after addition of 20 vol% of SiC whiskers and 10 vol% of SiC particles having an average particle size of 40 μm. These mechanical properties were almost constant from room temperature to temperatures around 1000°C. Fracture surface observations revealed that the reinforcing mechanisms acting in these composites were crack deflection and crack branching by SiC particles and pullout of SiC whiskers.     

Effects of External Stress on Defect Annihilation and Bubble Swelling During Annealing of Neutron-Irradiated Silicon Carbide

Silicon carbide ceramics fabricated by three different methods were neutron-irradiated in the Japan Materials Testing Reactor and were subsequently annealed free from stresses or under compressive external stresses. The macroscopic length monotonically decreased with annealing above the irradiation temperature, when annealing was performed below ∼1300°C. This decrease was not affected by the external stresses. However, annealing above ∼1300°C led to an increase in length in B-containing SiC. The expansion was caused by the formation and growth of He bubbles at grain boundaries. The growth occurred by flow of vacancies into bubbles. The compressive stress retarded the expansion along the loading direction. This retardation was compensated by a length incrase along the lateral direction. The effect of external stresses was discussed by considering differently oriented He bubbles. One bubble was stress favored and the other stress unfavored. The stress determined the diffusional flow of vacancy-He atom complexes between the favored and unfavored bubbles which were caused by anisotropic expansion under a directional stress.     

A formation of compatible poly(vinyl alcohol)/alumina gel composite and its properties

A formation of poly(vinyl alcohol) (PVA)/alumina gel composite was investigated with a viewpoint of compatibility of the composite. An alumina sol was prepared from aluminium iso-propoxide (Al(iPro)₃). The alkoxide was hydrolyzed and the resultant hydrate was peptized to a clear sol with acetic acid. The composite were transparent in whole content of alumina. The effects of dispersed alumina on the sorption of water and mechanical properties of composite were examined. The composites containing PVA 40–50% are flexible. They are folded in various forms and can be drawn five times the initial length in humid state. The residues obtained by calcination to remove PVA at 600°C keep its original form and transparency.     

Pentacene/n-Si heterojunction diodes and photovoltaic devices investigated by I-V and C-V measurements

The forward and reverse current density-voltage (J-V) and capacitance-voltage (C-V) characteristics of pentacene/n⁻-silicon heterojunction diodes were investigated to clarify the carrier conduction mechanism at the organic/inorganic heterojunction. Current rectification characteristics of the pentacene/n⁻-Si junctions can be explained by a Schottky diode model with an interfacial layer. The diode parameters such as Schottky barrier height and ideality factor were estimated to be 0.79-1.0 eV and 2.4-2.7, respectively. The C-V analysis suggests that the depletion layer appears selectively in the n⁻-Si layer with a thickness of 1.47 μm from the junction with zero bias and the diffusion potential was estimated at 0.30 eV at the open-circuit condition. The present heterojunction allows the photovoltaic operation with power conversion efficiencies up to 0.044% with a simulated solar light exposure of 100 mW/cm².     

Lipid droplets: size matters

The lipid droplet (LD), an organelle that exists ubiquitously in various organisms, from bacteria to mammals, has attracted much attention from both medical and cell biology fields. The LD in white adipocytes is often treated as the prototype LD, but is rather a special example, considering that its size, intracellular localization and molecular composition are vastly different from those of non-adipocyte LDs. These differences confer distinct properties on adipocyte and non-adipocyte LDs. In this article, we address the current understanding of LDs by discussing the differences between adipocyte and non-adipocyte LDs.     

Growth of thick CdTe epilayers on GaAs substrates and evaluation of CdTe/n<Superscript>+</Superscript>-GaAs heterojunction diodes for an X-ray imaging detector

The growth characteristics of thick (100) CdTe epitaxial layers of a thickness up to 200 μm on a (100) GaAs substrate in a metal-organic vapor-phase epitaxy (MOVPE) system and fabrication of CdTe/n⁺-GaAs heterojunction diodes for their possible applications in low-energy x-ray imaging detectors are reported. The grown epilayers were of high structural quality as revealed from the x-ray double-crystal rocking curve (DCRC) analysis, where the full-width at half-maximum (FWHM) values of the (400) diffraction peaks was between 50 arcsec and 70 arcsec. The 4.2-K photoluminescence (PL) showed high-intensity bound-excitonic emission and very small defect-related peaks. The heterojunction diode fabricated had a good rectification property with a low value of reverse-bias current. The x-ray detection capability of the diode was examined by the time-of-flight (TOF) measurement, where good bias-dependent photoresponse was observed, but no carrier transport property could be deduced. It was found that the CdTe layer has a large number of trapping states as attributed to the cadmium-related vacancy and Ga-impurity, diffused from the substrate, related defect complexes.     

Measurement of RF Transmission Mode in ITER Relevant EC H&;CD Transmission Line

The preliminary results of mode measurement in the ITER relevant 40 m long transmission test line composed from 63.5 mm diameter corrugated waveguides and miter bends are presented. The field patterns were measured by taking temperature profiles on a paper screen placed in front of the waveguide end using an infrared imaging camera. The complex electric field at the waveguide end was retrieved from the measured temperature profiles. As a result, the transmission power includes 87% of HE₁₁ mode and 6% of LP₁₁ odd (HE₂₁+TE₀₁) mode and small ratios of other modes. The mode content had small dependence on length of the transmission line. This result indicated that the higher order mode content generated at the input of the transmission line is conserved and propagated through the transmission line. This suggests that the initial RF coupling to the waveguide is critical since it affects the launcher efficiency.