Nanocomposites based on polyethylene and Mg-Al layered double hydroxide. I. Synthesis and characterization

Low density polyethylene (LDPE)/Mg-Al layered double hydroxide (LDH) nanocomposites have been synthesized with different compositions by melt-mixing technique using maleic anhydride grafted polyethylene as compatibilizer. LDH has been modified by sodium dodecylbenzene sulfonate using reconstruction method and characterized by X-ray diffraction (XRD) and Fourier transform infrared (FTIR) spectroscopy. The nanocomposites are characterized by different techniques such as, transmission electron microscopy (TEM), XRD and rheology. The TEM analysis shows a complex nature of particle dispersion in the polymer matrix with wide distribution of particles sizes and shapes. The rheological analysis showed significant changes in linear viscoelastic responses of the composites, even at very low concentration (2 phr) of LDH materials, in comparison to the pure polymer in low frequency regime in dynamic frequency sweep experiments. These changes are related to the LDHs-polymer chains interactions resulting in network-like structure.     

Electrodeposition of polypyrrole on aluminium in aqueous tartaric solution

The electrosynthesis of polypyrrole (PPy) has been achieved on aluminium in aqueous medium of tartaric acid by means of cyclic voltammetry, potentiostatic and galvanostatic techniques. Scanning electron microscopy (SEM) and X-ray microanalysis by energy spectroscopy dispersion (EDS) applying on surfaces show that the PPy coating is developed from the metal surface through the cracks of the initial Al₂O₃ layer.A mechanism involving the participation of the supporting electrolyte and the pyrrole (Py) in distinct active sites was proposed based on the linear sweep voltammetry. It is observed for all applied electrochemical techniques that the pyrrole concentration has to be higher than 0.1 M to allow the polypyrrole electrodeposition in acid medium.Scanning electron microscopy, secondary electrons (SE) and backscattering electrons (BE), shows that the PPy coating obtained in galvanostatic and potentiostatic modes starts with small islands at weak applied potentials or current densities. Moreover, EDS reveals a good homogeneity and compactness of the film achieved in galvanostatic method. The corrosion results in 3% NaCl medium show that the PPy coating decreases the corrosion behaviour of the aluminium. The bilayer Al₂O₃/PPy shows a capacitor with future applications.     

Thioglycolate-elicited rat macrophages exhibit alterations in incroporation and oxidation of fatty acids

Incorporation and oxidation of fatty acids (FA) were investigated in resident and thioglycolate-clicited (TG-elicited) rat macrophages (Mϕ). Both cell types presented a time-dependent incorporation of [¹⁴C]-labeled palmitic acid (PA), oleic acid (OA), linoleic acid (LA), and arachidonic acid (AA) up to 6h. The total amount of [¹⁴C]-FA incorporated by resident Mϕ after 6 h was: AA>PA=LA>OA. TG-elicited cells presented a 50% reduction in the incorporation of LA, PA, and AA, whereas that of OA remained unchanged as compared to resident Mϕ. The FA were oxidized by resident Mϕ as follows: LA>OA>PA>AA. TG elicitation promoted a reduction of 42% in LA oxidation and a marked increase in AA oxidation (280%). The increased oxidation of AA in TG-elicited cells may account for the lower production of prostaglandins in Mϕ under these conditions. The full significance of these findings for Mϕ function, however, remains to be examined.     

Prediction of mean square radius of gyration of tree-like polymers by a general kinetic approach

This paper describes a kinetic method to predict the z-average molecular mean square radius of gyration of tree-like polymers formed by irreversible reactions, assuming Gaussian chains. It is based on the population balance equations for the two-sided molecular distributions of pendant chains associated with every chemically distinguishable kind of bonds. An automated method for the solution of those equations is valid both before as well as after gelation for complex kinetic schemes. Examples of its use are presented with polycondensation systems leading to hyperbranched polymers, the anionic polymerization of mono- and divinyl monomers and a radical polymerization with terminal branching and transfer to polymer.     

The CH4/NO/O2 “Lean-deNOx” Reaction on Mesoporous Mn-Based Mixed Oxides

High surface area Mn-based porous oxides (MANPO) containing additives like Ce, Sr and La were found to be very active and selective materials under 0.67% CH₄/0.2% NO/5% O₂ lean-deNO _x conditions in the 200–300°C low-temperature range. These materials perform also impressively in the presence of 4% H₂O in the feed stream, where a N₂ selectivity of 98% and an excellent stability over 24 h on stream have been observed. The MANPO materials can be considered serious competitors of noble metals for low-temperature lean-deNO _x applications.     

Synthesis and characterization of epoxidized styrene–butadiene rubber/silicon dioxide hybrid materials

Hybrid materials were synthesized from epoxidized (68, 43, or 14%) styrene–butadiene rubber (SBR) and the hydrolysis product of tetraethoxysilane (TEOS) in situ under ultrasonic irradiation. The products were characterized with thermal analysis (differential scanning calorimetry and thermogravimetric analysis), stress–strain tests, scanning electron microscopy (including energy‐dispersive spectrometry), and swelling in tetrahydrofuran and water. The most transparent were those prepared from SBR with the highest degree of epoxidation, whereas those obtained from less epoxidized SBR and with larger amounts of TEOS showed distinct phases that could be considered two hybrid phases (one rich in TEOS and another rich in SBR). © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 798–803, 2004     

Catkin liked nano-Co3O4 catalyst built-in organic microreactor by PEMOCVD method for trace CO oxidation at room temperature

In this paper, tricobalt tetraoxide (Co₃O₄) catalyst was coated on the polydimethylsiloxane microchannel by the plasma-enhanced metal-organic chemical vapor deposition technology. The obtained Co₃O₄ film was characterized by SEM, XRD, XPS, and TEM, and the results show that the as-deposited Co₃O₄ film was initially composed of many cauliflowers-shaped microclusters. Also, the microcauliflower was transformed from an amorphous phase to a crystal phase when the Co₃O₄ film was treated by Ar and O₂ plasma for more than 20 min, and the crystal lattice line occurred on the surface of nano-sized-Co₃O₄ particles. Meanwhile, the interface of Co₃O₄ particles with diameter between 3 and 12 nm became obvious and some nano-catkin structures were also formed on the Co₃O₄ film. The ratio of Co³⁺/Co²⁺ in the spinel-type Co₃O₄ was nearly 2, and the nano-particles predominantly expose their {311}, {111}, and {220} planes. These morphologies and structure characteristics were found to be ideal for increasing the catalytic activity efficiency of Co₃O₄ for CO oxidation, and the catalytic stability of Co₃O₄ coated on the organic microreactor lasted nearly 85 h for trace CO oxidation at room temperature.     

Comparative study of homogeneous and heterogeneous styrene polymerizations with Ni(acac)2/MAO catalytic system

Styrene polymerization was carried out with Ni(acac)₂/MAO and Ni(acac)₂/SiO₂/MAO. The influence of reaction parameters (Al/Ni mole ratio, catalyst concentration, temperature and time polymerization) on styrene polymerization was evaluated. It was observed that both catalytic systems were affected by reaction parameters and that the heterogeneous catalyst presented higher activity than the homogeneous one. Polystyrenes with different molecular weight, stereoregularity and polydispersity were obtained. These results suggest that different active catalyst species could have been present. In addition, two types of methylaluminoxane (MAO) with different molecular weights were also evaluated as cocatalyst. As a result, the catalyst activity and stereospecificity were strongly affected by the MAO type.     

Mechanical and dynamic mechanical properties of rice husk ash–filled natural rubber compounds

A laboratory‐sized two‐roll mill was used to incorporate rice husk ash into natural rubber (NR). A conventional vulcanization system was used for curing and cure studies were carried out on a Monsanto rheometer. Physical testing of the NR vulcanizates involved determining tensile and tear resistances and hardness. Swelling behavior of NR compounds and scanning electron microscopy were used to investigate the interaction between rice husk ash and natural rubber. Also, dynamical mechanical thermal analysis was used to assess filler–rubber interactions in terms of storage modulus (E′) and loss tangent (tan δ). For comparison purposes, two commercial fillers, precipitated silica (Zeosil‐175) and carbon black (N774), were also used. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2331–2346, 2002     

Chemical Composition Determination at the Bottom Region of a Recovery Boiler Furnace by Direct Minimization of Gibbs Free Energy

An optimization strategy has been applied to describe the chemical composition at the furnace bottom in the Kraft recovery boiler of a pulp production process. The concentrations of each involved chemical species were calculated through an optimization approach, minimizing the Gibbs free energy of the system. Various systems were proposed and tested, assuming different chemical species and phases number. Because serious initialization problems were found at this stage for some of the proposed systems, an optimization heuristic method (PSO) was used for the first approach to the problem. Once the appropriate phases number and chemical species in the system were determined, the initialization problems disappeared and the use of a deterministic optimization method (SQP) became viable. The proposed approach has shown to be satisfactory to reproduce industrial data and also data reported in the open scientific literature.