Fabrication of DNA-antibody–apatite composite layers for cell-targeted gene transfer

Surface-mediated gene transfer systems using apatite (Ap)-based composite layers have received increased attention in tissue engineering applications owing to their safety, biocompatibility and relatively high efficiency. In this study, DNA-antibody–apatite composite layers (DA–Ap layers), in which DNA and antibody molecules are immobilized within a matrix of apatite nanocrystals, were fabricated using a biomimetic coating process. They were then assayed for their gene transfer capability for application in a specific cell-targeted gene transfer. A DA–Ap layer that was fabricated with an anti-CD49f antibody showed a higher gene transfer capability to the CD49f-positive CHO-K1 cells than a DNA–apatite composite layer (D–Ap layer). The antibody facilitated the gene transfer capability of the DA–Ap layer only to the specific cells that were expressing corresponding antigens. When the DA–Ap layer was fabricated with an anti-N-cadherin antibody, a higher gene transfer capability compared with the D–Ap layer was found in the N-cadherin-positive P19CL6 cells, but not in the N-cadherin-negative UV♀2 cells or in the P19CL6 cells that were pre-blocked with anti-N-cadherin. Therefore, the antigen–antibody binding that takes place at the cell–layer interface should be responsible for the higher gene transfer capability of the DA–Ap than D–Ap layer. These results suggest that the DA–Ap layer works as a mediator in a specific cell-targeted gene transfer system.     

Alkene and Alkyne Insertion into Hydrogen-Transition Metal Bonds Catalyzed by Palladium(0) Complex

Smooth, reversible and Markovnikov selective alkene insertion of ethyl acrylate, acrylonitrile, and ethylene to MHCp(CO)₃ (M = Mo, W) or MnH(CO)₅ has been catalyzed by Pd(PPh₃)₄ at 20 °C. Cis-selective insertion of acetylene and dimethyl acetylenedicarboxylate into MHCp(CO)₃ (M = Mo, W) also proceeded smoothly.     

City-level energy and CO2 reduction effect by introducing new residential water heaters

Simulation models for a variety of new water heater systems were developed and the models were integrated into a city-level residential energy end-use model for Osaka City. Using the model, the potential of energy conservation and CO₂ emission-reduction by introducing new residential water heaters was evaluated at the city-level. Optimal water-heating systems for each household category for primary energy reduction, CO₂ emission-reduction, or cost reduction were identified by applying the end-use demand model. The effect of subsidies for installing more efficient systems and the influence of diffusion of these systems on electricity load curves were also discussed.     

Space art: aesthetics design as psychological support

The purpose of this article is to explore the possibilities of art and design in the context of space development. The focus is the effects of arts on feelings, how to enjoy arts as a creator (Ono expressed together with “Art for psychological support”, the paper presented at European Space Agency (ESA), Tools for psychological support during exploration missions to Mars and Moon, Noordwijk, The Netherlands, 2007), supporting the idea of Joseph Beuys that “every human being is an artist” (Art into society, society into art. First published in English in Caroline Tisdall, ICA, London, p 48, 1973). Expression with arts is helpful to find our real selves. When humans create arts, their inner feelings will appear. Art therapy works in this way (Ono in Expressive arts therapy—drawing, clay, music, drama, and dance, Seishinshobo, Japan, 2005). Artistic expressions effect positively the human well-being. This work hypotheses that also in outer space artistic expression will be able to improve astronauts’ quality of life. The topics approached in this article are: (1) Space Art; (2) Psychology and Space Art; (3) Lunar Zen Garden Habitat; (4) Astronaut′s Art.     

Growth of Alumina/Metal Composites into Porous Ceramics by the Oxidation of Aluminum

Alumina/metal composites were grown into the pores of porous alumina, porous aluminosilicate, and porous silicon carbide substrates through the oxidation of Al–Si (5 wt%) powder compacts coated with magnesia powder (11 mg/ cm²). The thickness of the resulting composite increased with oxidation time and temperature, and was proportional to (pore size)^0.5 on using porous alumina. The composite thickness was more than 2 times larger in the silicon carbide and about 4 times larger in the aluminosilicate than in the alumina at 1523 K for 1 h. The products using these three types of substrates consisted of alumina, aluminum, and silicon, except that a silicon carbide phase occurred when using the silicon carbide substrate. Silica and mullite in the aluminosilicate substrate changed to silicon and alumina, and silica in the silicon carbide substrate changed to silicon because of the reduction by aluminum.     

Sources of polycyclic aromatic hydrocarbons (PAHs) in street dust in a tropical Asian mega-city, Bangkok, Thailand

We collected samples of roadside air, automobile exhaust soot, tires, asphalt, and used engine oil in a tropical Asian mega-city, Bangkok, Thailand, and analyzed them for polycyclic aromatic hydrocarbons (PAHs) and hopanes. The concentrations and compositions of PAHs and hopanes were utilized to identify the sources of PAHs in street dust, in which high concentrations of PAHs were reported in our previous study. Weight-based concentrations of total PAHs had the following order: gasoline-powered vehicle soot (2600+/-2900 microg/g; n=4)>diesel-powered vehicle soot (115+/-245 microg/g; n=7) approximately roadside aerosols (101+/-35 microg/g; n=5) approximately used engine oil (97+/-65 microg/g; n=4) approximately tire wear particles (82+/-41 microg/g; n=5)>asphalt (2.3+/-1.6 microg/g; n=3)>street dust (1.1+/-0.8 microg/g; n=10). In cluster analysis, all the source materials fell into different clusters from that in which street dust fell, indicating that multiple source materials contribute to PAHs in the street dust. Multiple regression analysis of PAH profiles and diagnostics of hopane compositions identified tire debris as the major contributor of PAHs to street dust, followed by diesel vehicle exhaust.     

Removal of selected pharmaceuticals and personal care products (PPCPs) and endocrine-disrupting chemicals (EDCs) during sand filtration and ozonation at a municipal sewage treatment plant

We investigated the efficiencies of removal of 24 pharmaceutically active compounds (PhACs) during sand filtration and ozonation in an operating municipal sewage treatment plant (STP). The target compounds were 2 phenolic antiseptics (thymol, triclosan), 5 acidic analgesics or anti-inflammatories (ibuprofen, naproxen, ketoprofen, fenoprofen, mefenamic acid), 4 amide pharmaceuticals (propyphenazone, crotamiton, carbamazepine, diethyltoluamide), 7 antibiotics (sulfapyridine, sulfamethoxazole, trimethoprim, azithromycin, erythromycin anhydride, clarithromycin, roxithromycin), 3 phenolic endocrine-disrupting chemicals (EDCs) (nonylphenol:NP, octylphenol:OP, bisphenol A:BPA) and 3 natural estrogens (17 beta-estradiol:E2, estrone:E1, estriol:E3). Ozonation removed approximately 80% or more of the phenolic antiseptics, crotamiton, sulfonamide and macrolide antibiotics, and 17 beta-estradiol. Their removal is discussed in terms of chemical structure. The study ascertained the validity of ozonation mechanisms proposed by previous studies in an actually running STP. Compounds with a CC double bond or an aromatic structure with electron donors (e.g., phenol, alkyl, methoxy, or non-protonated amine) were susceptible to ozonation. Compounds with amide structures were resistant. Removal of the PhACs during sand filtration was generally inefficient, probably because of their low hydrophobicities. The combination of ozonation and sand filtration with activated sludge treatment gave efficient removal (>80%) of all the target compounds except carbamazepine and diethyltoluamide. Among all the steps in the plant, ozonation contributed substantially to overall removal of naproxen, ketoprofen, triclosan, crotamiton, sulfapyridine, macrolide antibiotics, and estrone.     

Accumulation of radiocesium in wild mushrooms collected from a Japanese forest and cesium uptake by microorganisms isolated from the mushroom-growing soils

Mushrooms and soils samples collected from a sub-alpine forest of Mt. Fuji in Japan were measured for 137Cs and stable Cs. The ranges of 137Cs specific activities and stable Cs concentrations in the mushrooms were 291-7950 Bq kg(-1) dry weight and 4.69-58.1 mg kg(-1) dry weight, respectively. Both 137Cs specific activities and stable Cs concentrations in the mushrooms were higher than those in common agricultural plants. The 137Cs specific activities and stable Cs concentrations in the soils were 3.18-149 Bq kg(-1) dry weight and 0.618-2.18 mg kg(-1) dry weight, respectively. The appearance frequencies of filamentous actinomycetes and planktonic bacteria from the soils decreased according to increasing Cs contents in the medium. No relationship was observed between the appearance frequencies of those and the stable Cs concentrations in the soils. The filamentous actinomycetes from any soil sample could not grow in the presence of 25 mM Cs, although the planktonic bacteria from the soil samples could grow with up to 50 mM Cs in YM agar. In addition, the planktonic bacteria from approximately 70% of the soil samples could grow even in the presence of 100 mM Cs. Filamentous actinomycetes were more sensitive to Cs than planktonic bacteria. In in vitro experiments, Cs uptake by these strains of filamentous actinomycetes and planktonic bacteria was high in the presence of 5 mM CsCl and the strains accumulated Cs, the same as in mushrooms. Our results indicate that filamentous actinomycetes in the soils have higher sensitivity to Cs than planktonic bacteria, and several strains of filamentous actinomycetes have a high Cs accumulation in the presence of 5 mM Cs.     

Spectroscopic Studies of R(+)-α-Lipoic Acid—Cyclodextrin Complexes

α-Lipoic acid (ALA) has a chiral center at the C6 position, and exists as two enantiomers, R(+)-ALA (RALA) and S(−)-ALA (SALA). RALA is naturally occurring, and is a cofactor for mitochondrial enzymes, therefore playing a major role in energy metabolism. However, RALA cannot be used for pharmaceuticals or nutraceuticals because it readily polymerizes via a 1,2-dithiolane ring-opening when exposed to light or heat. So, it is highly desired to find out the method to stabilize RALA. The purpose of this study is to provide the spectroscopic information of stabilized RALA and SALA through complexation with cyclodextrins (CDs), α-CD, β-CD and γ-CD and to examine the physical characteristics of the resultant complexes in the solid state. The RALA-CD structures were elucidated based on the micro fourier transform infrared (FT-IR) and Raman analyses. The FT-IR results showed that the C=O stretching vibration of RALA appeared at 1717 cm⁻¹ and then shifted on formation of the RALA-CD complexes. The Raman spectra showed that the S–S and C–S stretching vibrations for RALA at 511 cm⁻¹ (S–S), 631 cm⁻¹ (C–S) and 675 cm⁻¹ (C–S) drastically weakened and almost disappeared upon complexation with CDs. Several peaks indicative of O–H vibrations also shifted or changed in intensity. These results indicate that RALA and CDs form host-guest complexes by interacting with one another.