Measurement of surface dryout near heating surface at high heat fluxes in subcooled pool boiling

The authors have conducted measurements of liquid–vapor behavior in the vicinity of a heating surface for saturated and subcooled pool boiling on an upward-facing copper surface by using a conductance probe method. A previous paper [A. Ono, H. Sakashita, Liquid–vapor structure near heating surface at high heat flux in subcooled pool boiling, Int. J. Heat Mass Transfer 50 (2007) 3481–3489] reported that thicknesses of a liquid rich layer (a so-called macrolayer) forming in subcooled boiling are comparable to or thicker than those formed near the critical heat flux (CHF) in saturated boiling. This paper examines the dryout behavior of the heating surface by utilizing the feature that a thin conductance probe placed very close to the heating surface can detect the formation and dryout of the macrolayer. It was found that the dryout of the macrolayer formed beneath a vapor mass occurs in the latter half of the hovering period of the vapor mass. Two-dimensional measurements conducted at 121 grid points in a 1-mm × 1-mm area at the center of the heating surface showed that the dryout commences at specific areas and spreads over the heating surface as the heat flux approaches the CHF. Furthermore, transient measurements of wall void fractions from nucleate boiling to transition boiling were conducted under the transient heating mode, showing that the wall void fraction has small values (<10%) in the nucleate boiling region, and then steeply increases in the transition boiling region. These findings strongly suggest that the macrolayer dryout model is the most appropriate model of the CHF for saturated and subcooled pool boiling of water on upward facing copper surfaces.     

Coexpression of platelet-derived growth factor receptor alpha and fetal liver kinase 1 enhances cardiogenic potential in embryonic stem cell differentiation in vitro

Nascent mesodermal cells derived from EB5 embryonic stem (ES) cells were sorted in terms of cardiogenic potential on the basis of their expression levels of platelet-derived growth factor receptor alpha (PDGFRalpha) and fetal liver kinase 1 (Flk-1). The sorted cells were cocultured with OP9 stromal cells to induce terminal differentiation into contractile cardiac colonies. A significant number of cardiac colonies were found in the Flk-1+/PDGFRalpha+ fraction. The enrichment double-positive fraction produced approximately fivefold more cardiac colonies than the Flk-1+/PDGFRalpha- fraction and 10-fold more than the Flk-1-/PDGFRalpha+ fraction. To investigate the involvement of these markers in embryonic cardiogenesis, the cells that disseminated from the E7.5-7.75 embryos were fractionated and seeded on OP9 cells. The cardiogenic potential was markedly enhanced in the Flk-1+/PDGFRalpha+ fraction. These results suggest that some of the precursor cells coexpressing these markers are selectively involved in cardiogenic events, and that the identification of ES-cell-derived precursors with these markers will contribute to the effective production of cardiomyocytes for cell therapies.     

Measurements of thermal-neutron capture cross-section of Cesium-135 by applying mass spectrometry

ABSTRACT

The thermal-neutron capture cross-section (σ₀) and resonance integral (I₀) were measured for the ¹³⁵Cs(n,γ)¹³⁶Cs reaction by an activation method and mass spectrometry. Because of difficulty in the preparation of pure ¹³⁵Cs samples, we used ¹³⁵Cs contained as an impurity in a normally available ¹³⁷Cs standard solution. An isotope ratio of ¹³⁵Cs and ¹³⁷Cs in a standard ¹³⁷Cs solution was measured by mass spectrometry to quantify ¹³⁵Cs. Cesium-135 impurity along with the ¹³⁷Cs standard solution was irradiated at the hydraulic conveyer of the research reactor in the Institute for Integral Radiation and Nuclear Science, Kyoto University. Wires of Co/Al and Au/Al alloys were used as neutron monitors to measure thermal-neutron fluxes and epi-thermal Westcott’s indices at an irradiation position. A gadolinium filter was used to measure the σ₀, and a value of 0.133 eV was taken as the cut-off energy. Gamma-ray spectroscopy was used to measure induced activities of ¹³⁷Cs, ¹³⁶Cs and monitor wires. On the basis of Westcott’s convention, the σ₀ and I₀ values were derived as 8.57 ± 0.25 barn, and 45.3 ± 3.2 barn, respectively. The value of σ₀ obtained in the present study agreed within the limits of uncertainties with the past-reported value of 8.3 ± 0.3 barn.     

Quantitative measurement of mRNA at different loci within an individual living cell

Asymmetric localizations of cellular proteins and mRNAs are important for cell functions such as division, differentiation and development. The localization of specific mRNA generates cell polarity by controlling the translation sites of specific proteins and thereby restricting their locations to appropriate cellular regions. We have previously reported a novel method based on atomic force microscopy (AFM) for examining gene expression in a single living cell without killing or destroying it. An AFM tip was inserted into a living cell to extract mRNAs, which were analyzed after multiplication by RT-PCR and quantitative PCR. By applying this method, in this study we performed quantitative measurement of mRNA at different loci within individual living cells.     

Selective labeling of proteins by using protein farnesyltransferase

The challenging task of identifying and studying protein function has been greatly aided by labeling proteins with reporter groups. Here, we present a strategy that utilizes an enzyme that labels a four-residue sequence appended onto the C terminus of a protein, with an alkyne-containing substrate. By using a bio-orthogonal cycloaddition reaction, a fluorophore that carried an azide moiety was then covalently coupled to the alkyne appended on the protein. FRET was used to calculate a F?rster (R) distance of 40 A between the eGFP chromophore and the newly appended Texas Red fluorophore. This experimental value is in good agreement with the predicted R value determined by using molecular modeling. The small recognition tag, the high specificity of the enzyme, and the orthogonal nature of the derivatization reaction will make this approach highly useful in protein chemistry.     

Preparation of Fe-based monodisperse spherical particles with fully glassy phase

In this study, we prepared monodisperse spherical particles of a desired diameter using [(Fe_0.5Co_0.5)_0.75B_0.2Si_0.05]₉₆Nb₄ alloy; the particles were prepared by using an atomization process developed by us. The particles have perfect sphericity and narrow size distribution along with a homogeneous composition. The phase transitions of particles from the fully glassy phase to the crystalline phase via mixed phase structures occurred as the particle diameter was increased; the particles produced in the fully glassy phase in an argon atmosphere had a diameter of less than 300 μm. This allowed the estimation of the intrinsic critical cooling rate for the particles with a fully glassy phase, R_c:R_c varied in the range of 700-900 K/s and depended only on the initial temperature of the alloy melt.     

Formation of Small-Sized CdSxSe1-x Crystals in Sol-Gel-Derived SiO2 Glasses

Silica glasses doped with small-sized CdS_x-Se_1-x crystals were prepared by the sol-gel method. Gels synthesized by the hydrolysis of Si(OC₂H₅)₄, in the presence of CdSeO₄ with NH₄SCN dissolved in HNO₃ or NH₄OH, were heated in H₂-N₂ atmosphere. The pH value of solutions for CdSeO⁴ and NH⁴SCN primarily determined the fraction of anions in CdS^xSe^1-x crystals. The anion content in crystals was dependent on the pH value of the solvent and/or heat-treatment temperature, and the sulfur fraction changed from 0.1 to 0.6. The optical absorption spectra were red-shifted as the selenium content and the crystal size increased, and the emission spectra showed a sharp band near the absorption edge position and a broad tail extending into the long wavelength. The optical band gap energies increased reciprocally proportional to the square of the crystal size.     

Photooxidative degradation of polyethylene containing flame retardants by monochromatic light

Photodegradation of incombustible polymer materials [high-density (HD) and low-density (LD) polyethylene (PE) containing 0.5 to 2.0 phr of decabromodiphenyl ether (DBDE) or tetrabromobisphenol A (TBA) as a flame retardant] were studied using an Okazaki Large Spectrograph (OLS). Samples were irradiated in air at 23°C with monochromatic light of wavelengths at 260, 280, 300, 320, 340, and 360 nm. Ultraviolet and Fourier transform infrared (FTIR) spectra were taken to estimate the chemical changes caused by photoirradiation. Molecular weight change was followed by gel permeation chromatography (GPC) measurements. It was found that the photostability of PE samples was reduced by the addition of flame retardants. The threshold wavelengths of photodegradation are 320 nm and 360 nm for PE–TBA samples and PE–DBDE samples, respectively. Main-chain scission is favored when the irradiation was carried out with the light of wavelength 300 nm for HDPE–DBDE and HDPE–TBA samples. The most effective irradiation wavelengths for crosslinking are found to be 300 nm and 280 nm for LDPE–DBDE and LDPE–TBA samples, respectively. 1995 John Wiley & Sons, Inc.     

Sintering Kinetics at Isothermal Shrinkage: Effect of Specific Surface Area on the Initial Sintering Stage of Fine Zirconia Powder

The isothermal shrinkage behaviors of fine zirconia powders (containing 2.8–2.9 mol% Y₂O₃) with specific surface areas of about 6 and 16 m²/g were investigated to clarify the effect of specific surface area on the initial sintering stage. The shrinkage of powder compact was measured under constant temperatures in the range of 1000°–1100°C. The increase in specific surface area enhanced the densification rate with increasing temperature. The values of activation energy ( Q ) and frequency-factor term (β₀) of diffusion at initial sintering were estimated by applying the sintering-rate equation to the isothermal shrinkage data. The Q of diffusion changes little but the β₀ increases with the increase in specific surface area. It is therefore concluded that the increase in the specific surface area of fine zirconia powder enhances the shrinkage rate because of an increase in the β₀ at the initial stage of sintering.     

Sintering Kinetics at Isothermal Shrinkage: II, Effect of Y2O3 Concentration on the Initial Sintering Stage of Fine Zirconia Powder

The shrinkage behavior of fine zirconia powders containing 2.9 and 7.8 mol% Y₂O₃ was investigated to clarify the effect of Y₂O₃ concentration on the initial sintering stage. The shrinkage of powder compact was measured under both conditions of constant rates of heating (CRH) and constant temperatures. CRH measurements revealed that when the Y₂O₃ concentration of fine zirconia powder increased, the starting temperature of shrinkage shifted to a high temperature. Isothermal shrinkage measurements revealed that the increase in Y₂O₃ concentration causes the shrinkage rate to decrease. The values of activation energy ( Q ) and frequency-factor term (β₀) of diffusion at initial sintering were estimated by applying the sintering-rate equation to the isothermal shrinkage data. When the Y₂O₃ concentration increases, both Q and β₀ of diffusion increase. It is, therefore, concluded that the increase in Y₂O₃ concentration of fine zirconia powder decreases the shrinkage rate because of increasing Q of diffusion at the initial stage of sintering.