Influence of weathering on adhesion strength of chemically treated and coated Scotch pine

The objective of this study was to evaluate the effect of weathering on adhesion strength of Scotch pine (Pinus sylvestris L.) samples treated with three concentrations of Tanalith-E. Treated samples were also coated with polyurethane, synthetic and water based varnishes prior to 500 h accelerated weathering test. Adhesion strength between varnishing materials and substrate samples was determined employing pull-off type equipment. Based on the findings in this work adhesion strength values of samples decreased with increasing concentration of treatment chemical. The highest average strength value was found as 3.48 MPa for untreated control samples while 2.88 MPa was the lowest average value for the samples treated with Tanalith-E having 9% concentration and coated with water based varnish. Majority of the failures took place within the adhesion line between coating and the substrate with a very limited torn fibers. Results of statistical analysis revealed that samples coated with three different types of varnishes did not show any significant difference from each other at 95% confidence level. It was also found that chemical treatment of the samples adversely influenced their overall adhesion strength characteristics.     

Natural-based polymers for antibacterial treatment of absorbent materials

In this study, polypropylene (PP) nonwoven fabric which can be used as topsheet layer of an absorbent hygienic product was modified by natural based antibacterial agents. Antibacterial herbal agents (cinnamaldehyde, geraniol, phenylethyl alcohol) were sprayed by ethanol or applied by means of polylactic acid (PLA) and polycyclohexene oxide (PCHO) based polymers prepared by three different chemical methods. Characterization of synthesized materials was conducted via thermogravimetric analysis (TGA), differential thermal analysis (DTA), and scanning electron microscopy–energy dispersive X–ray spectroscopy (SEM-EDX). Besides characterization, antibacterial and pH buffering performances of antibacterial polymers alone and on PP fabric were tested by antibacterial and pH tests. Effects of antibacterial treatments on air permeability and absorption period of nonwoven fabrics were also analyzed. According to the results, biopolymers changed the thermal stability of PP nonwoven fabric. Antibacterial performances can be ranked as cinnamaldehyde, geraniol, and phenylethyl alcohol from the best. Besides a slight decrease about liquid absorption performance, all of the treated topsheet fabrics are sufficient for an absorbent hygienic product. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48302.     

Propolis and carnauba wax-based safflower oil oleogels as fat substitutes in cakes: Production,oxidative stability,and characterization

In this study, safflower oil oleogels were made using propolis wax and carnauba wax in three different concentrations each, and their effectiveness as a fat substitute in cake was evaluated afterward. Oleogels' oxidative stability and characterization were looked into. In oleogels, the oil binding capacity, solid fat content, and crystallization time were all assessed. The cakes underwent an examination for moisture content, texture, and sensory evaluation. Additionally, analyses of fatty acid composition, free fatty acidity, oxidative stability (peroxide value, conjugated diene-triene), 3-monochloropropane-1,2-diol (3-MCPD), and glycidyl were carried out both before and after baking in oleogels and shortening. Several of the physical, textural, and sensory qualities of the oleogel-based cakes were acceptable when compared to those of the shortening-based cakes. The general acceptability of cakes made with carnauba wax was very high and almost under control. The acceptability of cakes made with propolis wax oleogels was lower than this. The study of these criteria has shown that safflower oil-based carnauba and propolis wax oleogels can be utilized to produce high-quality, healthful cakes with a high amount of unsaturated fatty acids. Practical Applications : To replace fat phases in cake products high in saturated fatty acids and to enhance the fatty acid profile of the cakes, safflower oil-based oleogels with propolis wax and carnauba wax are a very good option. The results obtained provide useful information for the production of high-quality cakes with higher unsaturated fatty acid content, recommended for a healthier diet, with these oleogels containing different concentrations of oleogelator.     

Effects of dowels produced from various materials on withdrawal strength in MDF and Pb

Wood dowels are commonly used in the construction furniture, but little information is available about the additive effects of dowels on the ultimate withdrawal strength of single or multidowel joints. This study was carried out to determine the tensile strength of 10‐mm‐diameter dowels produced from medium‐density fiberboard (MDF), plywood, scotch pine (Pinus sylvestris L.), and beech (Fagus orientalis lipsky), bonded parallel and vertical to the surface of MDF and particleboard (Pb) with poly(vinyl acetate) (PVAc) and Desmodur‐VTKA (D‐VTKA). Tensile strength was applied to the dowels according to the procedure in the ASTM‐D 1037 standard. The effects of dowel species, direction of tensile, composite material, and type of adhesive on tensile strength were determined. The results showed that the highest tensile strength was obtained in beech dowels bonded vertically with PVAc adhesive to the surface of MDF at 7.91 N/mm². If the dowels used in furniture production are subjected to great tensile strength, beech dowels bonded with PVAc adhesive on MDF should be used. However, when dowels produced from MDF and plywood waste are used, they also can produce positive results. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 531–535, 2003     

Photoluminescence characterization and heat treatment effect on luminescence behavior of BaTa2O6:Dy3+ phosphor

Undoped and Dy³⁺‐doped barium tantalate phosphors were synthesized by the solid‐state reaction method at 1425°C. Also, 10 mol% Dy³⁺‐doped BaTa₂O₆ was sintered between 1150 and 1425°C in order to determine temperature effect on structural and luminescence properties. Afterwards, they were characterized by XRD, SEM‐EDS and photoluminescence (PL) analyses. PL spectra exhibited the excitation peaks between 300 and 440 nm. Two typical emissions were observed at 486.2 nm (blue) and 577.7 nm (yellow) due to the ⁴F_9/2→⁶H_15/2 and ⁴F_9/2→⁶H_13/2 transitions, respectively. Emission intensities increased with increasing doping concentration of Dy³⁺ up to 10 mol% and then decreased due to the concentration quenching effect. Moreover, depending on the increase in heat treatment temperature, the intensity of emission reached maximum at 1425°C. The calculated CIE chromaticity coordinates of phosphors located in the white light region.     

Effect of calcium hydroxide removal techniques on the bond strength of root canal sealers

To evaluate the influence of calcium-hydroxide(CH) with different vehicles on the push-out bond strength of different canal sealers to radicular dentin. 152 decrowned single-rooted human teeth were used. After preparation of root canals with nickel-titanium rotary files, 8 roots served as control groups. Then, the roots were divided as follows: (1) Calasept and (2) Surepaste (n = 72). Roots were further subgrouped according to the CH removal techniques: (1) %17 ethylenediaminetetraacetic acid (EDTA) + rotary file, (2) %17EDTA + hand file, and (3) %17EDTA (n = 24). Eight roots from each group sectioned longitudinally, divided into two pairs and photographed by stereomicroscope (n = 16). The remaining 16 roots in CH intracanal dressing groups were further divided into 2 subgroups according to the sealer used: (1) AH-Plus-jet and (2) Apexit-Plus (n = 8). Bond strengths of the root canal sealers to root canal dentin were measured using a push-out test setup. The data were statistically analyzed using multivariate analysis of variance p = 0.05. The push-out bond strength values were significantly affected by type of vehicle and the removal techniques (p < 0.05). The mean bond strength of AH-Plus-jet was significantly higher than Apexit-Plus, regardless of type of vehicle and the removal techniques (p < 0.05). There was no difference between vehicles on CH removal (p > 0.05). When examining the removal techniques, only irrigation with %17 EDTA left significantly larger amount of residue (p < 0.05). AH-Plus-jet showed better dislocation resistance than Apexit-Plus. Type of vehicle does not play a fundamental role in the degree of persistence of CH residues on the dentin walls. Instrumentation improves the removal efficiency of CH from root canal.     

Evaluation of antibacterial effects of contemporary orthodontic bonding materials

Aim: The aim of this study was to evaluate the antibacterial effects of five orthodontic bonding materials commonly used in orthodontics. Materials and Methods: The antibacterial effects of five orthodontic bonding materials were evaluated against Streptococcus mutans and Streptococcus salivarius by direct contact test (DCT). Using the DCT technique, quintet specimens of Transbond XT, Blugloo, Grengloo, Light Bond, and Opal Bond were applied to the bottom and the walls of the five wells of a 96-microtiter plate with a height of 2 mm. Samples were prepared in two sets: 1-day samples and 7-day samples. Ten microliters of bacterial suspension were added to each well for direct contact with each material for 1h at 37 °C. Bacterial growth was then measured in a microplate spectrophotometer hourly at 600 nm for 24 h. Five uncoated wells with identical inoculum sizes served as positive controls. The data obtained at the end of 24 h was statistically analyzed with one-way ANOVA, and post hoc comparisons were done using Tamhane’s T2 test. Results: Blugloo generally showed better antibacterial activity than the other materials. Transbond XT did not show any antibacterial activity. There was a statistically significant difference between Transbond XT and Light Bond in the 1-day sample against S. mutans (p < 0.05). No statistically significant differences were found among the other groups (p > 0.05). Conclusion: Blugloo had the most potent antibacterial activity against S. salivarious.     

Effect of various pore formers on the microstructural development of tape-cast porous ceramics

Various types of pore formers have been used for the fabrication of ceramics with controlled porosity. This study addresses a detailed and systematic comparison of different pore formers (e.g. graphite, polymethyl methacrylate, sucrose and polystyrene) with distinct features such as size, distribution and morphology of particles and decomposition/oxidation behavior. Investigations also involve their effect on the rheological properties of the slurries and the microstructural development of laminated porous ceramic tapes.Morphological features of the pore former particles were characterized using laser diffraction, B.E.T. surface area measurement and scanning electron microscopy (SEM) techniques as their thermal decomposition/oxidation behavior were determined by thermogravimetric analysis (TGA) and differential thermal analysis (DTA) methods. Tape compositions were developed and optimized in order to incorporate identical volumetric loadings of the materials in the tape formulations with different pore formers for a reliable comparison of their pore forming characteristics. Porous yttria stabilized zirconia (YSZ) ceramics were fabricated without macroscopic defects (e.g. cracks, warpage and delamination) by developing heating profiles based on the identified thermal properties of the pore formers. Characterization of the sintered porous ceramics by SEM and mercury intrusion porosimetry techniques revealed novel relationships between the physical properties of the utilized pore formers, processing parameters and final pore structures.     

Determination of the optimum conditions for ion nitriding of AISI 5140 steel

AISI 5140 low alloy steel was ion nitrided under different process parameters including time (1, 4, 8 and 12 h), temperature (400, 450, 500 and 550 °C) and gas mixture ratio (0.05, 0.33, 1 and 3 N₂/H₂). By determining the fatigue strength, surface hardness, compound layer thickness and case depth, the optimum working conditions were determined by using a Taguchi design of experiment. After ion nitriding process, it is aimed to maximize fatigue strength, surface hardness and case depth as well as to minimize compound layer thickness. While the optimum conditions were determined, due to the goals (above aims) more than one being, the trade-off among goals was considered. First of all, each goal was optimised, separately. Then, all the goals were optimised together, considering the priority of the goals, and the optimum results were obtained at 0.05 N₂/H₂ gas mixture ratio, at the temperature of 450 °C and for 12 h process time.     

Chemical analyses of shale gas and conventional natural gas

Abstract

Shale gas is essentially non-traditional natural gas (NG). Shale gas can be considered an unusual alternative energy source. Shale gas production is a method of obtaining the NG trapped between deep underground rocks. Shale gas production is not economical, except for horizontal drilling and hydraulic fracturing methods. Advanced analysis of shale gaseous samples can be done using gas chromatography, mass spectrometry and other modern testing methods. The Orsat apparatus includes three absorption pipettes containing chemical solutions that absorb gases. Absorbents are a 33% by weight aqueous solution of potassium hydroxide (KOH) for carbon dioxide (CO₂), alkali pyrogallol for oxygen (O₂) and ammoniacal cuprous for carbon monoxide (CO) measurement. Oxygen is absorbed in alkaline pyrogallol or in a chromous solution. Shale gas can be analyzed best gas chromatographically. The capillary column can be separated from all the hydrocarbons and their isomers by alumina, which is used as a stationary phase in the gas chromatographic column, because alumina is highly selective for hydrocarbons. Silica is a specific adsorbent that exhibits greater applicability for hydrocarbons. The chemical contents of shale gas are similar to those of the conventional NG. The processing, transfer and storage and distribution of shale gas are assumed to be similar to the conventional NG.