Performance of Silicotungstic Acid Incorporated Mesoporous Catalyst in Direct Synthesis of Dimethyl Ether from Syngas in the Presence and Absence of CO2

Dimethyl ether (DME), which is an excellent green diesel fuel alternate, is synthesized following a direct synthesis route from synthesis gas, by using a bi-functional catalyst mixture, which was composed of a silicotungstic acid incorporated mesoporous catalyst [TRC-75(L)] and a commercial Cu–Zn based catalyst. Higher DME selectivity values were obtained by using TRC-75(L), than commercial γ-alumina at 50 bars. Presence of CO₂ in the feed stream caused significant enhancement in DME selectivity. Results showed that DME selectivity of about 0.85 was obtained in a temperature range 250–275 °C in the presence of 10 % CO₂. In fact, CO₂ was also used as a resource to produce DME at lower temperatures. Reverse dry reforming and ethanol formation reactions were observed as side reactions, especially at higher temperatures. Results also proved that direct synthesis of DME from syngas has major CO conversion and DME selectivity advantages over the two step process involving consecutive methanol synthesis and dehydration steps.     

Polymer-based tubular microbots: role of composition and preparation

The influence of the composition and electropolymerization conditions upon the propulsion of new template-prepared polymer-based bilayer microtubular microbots is described. The effects of different electropolymerized outer layers, including polypyrrole (PPy), poly(3,4-ethylenedioxythiophene) (PEDOT), polyaniline (PANI), and of various inner catalytic metal surfaces (Ag, Pt, Au, Ni-Pt alloy), upon the movement of such bilayer microtubes are evaluated and compared. Electropolymerization conditions, such as the monomer concentration and medium (e.g. surfactant, electrolyte), have a profound effect upon the morphology and locomotion of the resulting microtubes. The most efficient propulsion is observed using PEDOT/Pt microbots that offer a record-breaking speed of over 1400 body lengths s(-1) at physiological temperature, which is the fastest relative speed reported to date for all artificial micro/nanomotors. An inner Pt-Ni alloy surface is shown useful for combining magnetic control and catalytic fuel decomposition within one layer, thus greatly simplifying the preparation of magnetically-guided microbots. Polymer-based microbots with an inner gold layer offer efficient biocatalytic propulsion in low peroxide level in connection to an immobilized catalase enzyme. Metallic Au/Pt bilayer microbots can also be prepared electrochemically to offer high speed propulsion towards potential biomedical applications through functionalization of the outer gold surface. Such rational template preparation and systematic optimization of highly efficient microbots hold considerable promise for diverse practical applications.     

rhAPC reduces the endothelial cell permeability via a decrease of contractile tensions induced by endothelial cells

All cells generate contractile tension. This strain is crucial for mechanically controlling the cell shape, function and survival. In this study, the CellDrum technology quantifying cell's (the cellular) mechanical tension on a pico-scale was used to investigate the effect of lipopolysaccharide (LPS) on human aortic endothelial cell (HAoEC) tension. The LPS effect during gram-negative sepsis on endothelial cells is cell contraction causing endothelium permeability increase. The aim was to finding out whether recombinant activated protein C (rhAPC) would reverse the endothelial cell response in an in-vitro sepsis model. In this study, the established in-vitro sepsis model was confirmed by interleukin 6 (IL-6) levels at the proteomic and genomic levels by ELISA, real time-PCR and reactive oxygen species (ROS) activation by florescence staining. The thrombin cellular contraction effect on endothelial cells was used as a positive control when the CellDrum technology was applied. Additionally, the Ras homolog gene family, member A (RhoA) mRNA expression level was checked by real time-PCR to support contractile tension results. According to contractile tension results, the mechanical predominance of actin stress fibers was a reason of the increased endothelial contractile tension leading to enhanced endothelium contractility and thus permeability enhancement. The originality of this data supports firstly the basic measurement principles of the CellDrum technology and secondly that rhAPC has a beneficial effect on sepsis influenced cellular tension. The technology presented here is promising for future high-throughput cellular tension analysis that will help identify pathological contractile tension responses of cells and prove further cell in-vitro models.     

Hot air dehydration of figs (Ficus carica L.): drying kinetics and quality loss

The dehydration of fruit from fig trees is normally achieved by sun drying. There is concern about the safety of the end product, mainly because there is a risk of the development of aflatoxins. These concerns can be overcome by artificial drying (oven dehydration). Fig fruits of a local cultivar, which were either pre‐treated by blanching or blanching plus sulphuring or not treated at all, underwent hot air dehydration under mild processing conditions in a pilot airflow cabinet dryer. Sampling was carried out at regular intervals to calculate the rate of dehydration and assess quality changes. Microbiological counts and nonenzymatic browning were also monitored. Pretreatments resulted in a shorter processing time, compared with control fruits. In general, a falling dehydration rate period was observed. A dramatic loss of ascorbic acid was recorded, while an informal sensorial assay of the dried fruits gave a positive assessment.     

An Investigation in the Use of Ozone Gas in the Bleaching of Cotton Fabrics

Ozone, composed of three atoms of oxygen, can be used to oxidize many inorganic and organic impurities. Because of its high oxidizing capacity, the opportunities and parameters of ozone gas use in bleaching of cotton fabrics were researched in this study. It was found that in a very short time cotton fabrics can be bleached if the water content of cotton-woven fabric was 60% and the pH of the water impregnated was 7. Moreover, ozonation at room temperature was shown to be more efficient than ozonation at high to medium temperatures.     

Behaviour of some organophosphorus pesticide residues in peppermint tea during the infusion process

In order to investigate dissipation behaviour of malathion, fenitrothion, dimethoate, chlorpyrifos and pirimiphos-ethyl during the infusion process, pesticide-free dried peppermint leaves were spiked with the pesticides. Infusions were prepared according to the usual process of infusion preparation. The effect of the infusion process on the transfer of the pesticides from the spiked peppermint leaves into brew was examined at intervals of 5, 10, 15 and 20 min. Residues were determined using a gas chromatograph equipped with a flame ionisation detector (FID). The decrease in pesticide levels during infusion was found to be statistically significant (p < 0.05). Transfer of residues decreased significantly with infusion time. The carryover of the residues of dimethoate, which has the highest water solubility, into the infusion was the highest. Satisfactory relationships were found between water-solubility (Ws), partition coefficient (K_ow) and Henry’s law constant (H) of the pesticides with the transfer of pesticides to brewed tea. It was observed that not only water solubility or K_ow but also H controls the dissipation of the pesticides from water or their air–water partitioning.     

Degradation of organophosphorus pesticides in wheat during cookie processing

For investigating carryover of some organophosphorus pesticide residues in the cereal food chain from grain to consumer, a study was set up on wheat bran, flour and cookies, with and without bran. Special emphasis was given to malathion and chlorpyrifos-methyl residues in cookies for better protection of consumers. Pesticide-free wheat was placed in a small-scale model of a commercial storage vessel and treated with these pesticides. The residue levels of insecticides were determined in wheat, as well as in bran, flour and cookies produced from stored wheat at various time intervals during storage. A multiresidue analysis was performed using GC–NPD and GC–MS. Malathion and chlorpyrifos-methyl residue levels were higher than the maximum residue limits (MRLs) in wheat after 240 days of storage. MRLs established by the EC for malathion and chlorpyrifos-methyl in wheat are 8 and 3 mg kg⁻¹, respectively. The residue levels of insecticides in flour samples also exceeded the MRL (2 mg kg⁻¹ for both insecticides). Eight months of storage were not effective for reducing the residues in wheat to the levels below MRLs. Although, considerable amounts of the insecticides remained in the bran and flour, the cookie processing significantly reduced the concentrations in general. Chlorpyrifos-methyl was more persistent than was malathion and comparatively less degradation occurred during milling and cookie processing due to its physicochemical properties.     

Exergoeconomic analysis and optimization of combined heat and power production: A review

Exergoeconomics is also called thermoeconomics, and thermoeconomic analysis methodologies combine economic and thermodynamic analysis by applying the cost concept to exergy which accounts for the quality of energy. The main concept of thermoeconomics is the exergetic cost and it deals with cost accounting methods. This paper is a review on the exergoeconomic analysis and optimization of combined heat and power production (CHPP). A brief historical overview on the exergoeconomics analysis and optimization is given. The concept of exergetic cost and cost accounting methods are discussed. An application of relevant formulation is given using a diesel engine powered cogeneration system as an example. Main thermoeconomic methodologies available in literature are described and their advantages and disadvantages with respect to one another are compared and discussed through a well-known problem, namely CGAM. Important studies on thermoeconomic analysis and optimization of combined heat and power production are listed based on the methodology used and the type of system considered.     

Electrical characterization of the polyaniline/p-silicon and polyaniline titanium dioxide tetradecyltrimethylammonium bromide /p-silicon heterojunctions

Au/PANI/p-Si/Al and Au/PANI TiO₂ TTAB/p-Si/Al heterojunctions have been fabricated by spin coating of soluble polyaniline (PANI) and PANI titanium dioxide (TiO₂) tetradecyltrimethylammonium bromide (TTAB) on the chemically cleaned p-Si substrates. The thicknesses of the polymeric films have been determined by a profilometer. The current-voltage (I-V) characteristics of the heterojunctions have been obtained in the temperature range of 98-258 K. These devices have showed the rectifying behavior such as diode. The I-V characteristics of the devices have been analyzed on the basis of the standard thermionic emission theory at low forward bias voltage regime. It has been shown that the values of ideality factor decrease while the values of barrier height increase with increasing temperature. This temperature dependence has been attributed to the presence of barrier inhomogeneities at the organic/inorganic semiconductor interface. Furthermore, analysis of the double logarithmic I-V plots at higher forward bias voltages at all temperatures indicates that transport through the organic thin film is explained by a space-charge-limited current process characterized by exponential distribution of traps within the band gap of the organic film. The total concentration of traps has been found to be 3.52 × 10¹⁴ cm^− 3 and 3.14 × 10¹⁵ cm^− 3 for PANI and PANI TiO₂ TTAB layer, respectively.     

The effect of anionic surfactant on the properties of polythiophene/chitosan composites

Polythiophene/chitosan (PT/Ch) composites and PT homopolymers were chemically synthesized in the presence of anthraquinone‐2‐sulfonic acid sodium monohydrate, ACS anionic surfactant. Conductivity, FTIR, SEM, TGA, and XRD measurements were used to study the properties of the composites. The effect of the ratio of the surfactant to the Ch onto structural and physical properties of the composites was also investigated. Our experimental data show that the properties of the composites depend on the amount of both surfactant and Ch used. The highest conductivity of 9.62 × 10^?3 S/cm^?1 was measured for the PT/Ch2 sample. When measurements were taken for PT/Ch/ACS samples with different Ch and surfactants content, the highest conductivity and initial decomposition temperature were recorded for the PT/Ch2/ACS10 sample as 3.49 × 10^?4 S/cm^?1, 223°C, respectively. POLYM. ENG. SCI., 54:2632–2640, 2014. © 2013 Society of Plastics Engineers