Determination of metal contaminations in sea foods from Marmara,Aegean and Mediterranean seas: Twelve fish species

The concentrations of cadmium, cobalt, chromium, copper, iron, manganese, nickel, lead and zinc were determined by ICP-AES in muscles and livers of 12 fish species sampled from the Marmara, Aegean and Mediterranean seas of Turkey. Iron showed the highest levels in examined tissues of all fish species. Following Fe, Zn generally showed the second highest levels. Metal concentrations in edible parts of fish species were 0.02–0.37 mg kg⁻¹ for cadmium, 0.04–0.41 mg kg⁻¹ for cobalt, 0.04–1.75 mg kg⁻¹ for chromium, 0.32–6.48  mg kg⁻¹ for copper, 7.46–40.1 mg kg⁻¹ for iron, 0.10–0.99  mg kg⁻¹ for manganese, 0.02–3.97 mg kg⁻¹ for nickel, 0.33–0.86 mg kg⁻¹ for lead, 4.49–11.2 mg kg⁻¹ for zinc, respectively. All metal concentrations in livers were higher than those in muscles. In some stations, cadmium and chromium concentrations in both muscles and livers, and lead levels in livers of the examined species were higher than permissible safety levels for human uses.     

LC–MS/MS characterization,antidiabetic, antioxidative,and antibacterial effects of different solvent extracts of Anamur banana (Musa Cavendishii)

The main objective of this study was to examine the phenolic compounds and the antibacterial, antioxidant, anti-α-glucosidase and anti-α-amylase activities of the different extracts (methanol, ethanol and hexane) of Musa cavendishii collected from the Anamur district in Turkey. LC–MS/MS was used to identify phenolic compounds. Quinic acid, acotinic acid, hesperidin and amentoflavone were identified in methanol extract. These phenolic compounds, excluding hesperidin, were also identified in the ethanol extract. Methanolic extract appeared the most active in all enzyme inhibition, antibacterial and antioxidative activity assays which is mainly due to its rich phenolic content. The methanol extract of banana showed the highest anti-α-glucosidase and anti-α-amylase activities with IC50 values of 5.45 ± 0.39 mg/mL, 9.70 ± 0.29 mg/mL, respectively. This study showed that methanol and ethanol extract, especially the methanol extract, have potential for use in the development of functional foods for reducing the diabetes and bacterial risks.     

Experimental characterization and morphology investigation of composites based on high‐density and low‐density polyethylene reinforced with non‐crimp‐stitched glass fabrics

In this study, the effects of matrix material on mechanical properties were investigated in glass fiber reinforced high‐density and low‐density polyethylene composites. Also, in order to compare the fiber configuration effect on anisotropic behavior, unidirectional and biaxial glass fabrics were used as reinforcement material. Composite laminates were manufactured via the compression molding technique. Tensile and three‐point bending flexural tests were conducted up to failure on specimens cut out in different directions. Extensive fracture photomicrographs were presented for observing the failure modes (e.g. delamination) of the composites resulting from a variety of loading conditions. In addition, Scanning electron micrographs of postfractured surfaces of composites were interpreted in an attempt to explain the failure mechanisms (adhesive or cohesive failure) of the composites. POLYM. COMPOS., 2008. © 2008 Society of Plastics Engineers     

Buckling Characteristics of Symmetrically and Antisymmetrically Laminated Composite Plates with Central Cutout

A numerical and experimental study was carried out to determine the effects of anti-symmetric laminate configuration, cutout and length/thickness ratio on the buckling behavior of E/glass-epoxy composite plates. The buckling loads were presented for symmetrically and anti-symmetrically laminated plates subjected to axial compression load. The study included two different laminate configurations ([90/45/−45/0]_as and [90/45/−45/0]_s), two different cutout shapes (circular and semi-circular), two different length/thickness ratios (L/t = 75 and 37.5) and three boundary conditions (clamped–clamped [CC], clamped–pinned [CP] and pinned–pinned [PP]). Firstly, the buckling loads of eight-ply E/glass-epoxy rectangular plates were determined experimentally. Then, the buckling loads of the laminated composites were calculated by ANSYS finite-element computer code. The changing in buckling load of the composites due to the presence of cutout and changing of length/thickness ratio was calculated. Finally, the experimental test results were compared to the buckling loads of plates obtained from the finite element analysis.     

Preparation of dendritic waterborne polyurethane-urea/Ni–Zn ferrite composite coatings and investigation of their microwave absorption properties

This study shows the preparation of microwave absorbing composite material by using Ni–Zn ferrite filler and dendritic waterborne polyurethane-urea (WPU) polymer as a matrix. Initially, waterborne polyurethane prepolymers were synthesized by using PEG1500 (WPU1) and PPG1000 (WPU2) polyols via prepolymer mixing process. Then, chain extended with water in the presence of hexamethylenetetramine (HMTA) as crosslinker. Then, 1/1 (w/w) amount of Ni–Zn ferrite was dispersed in the WPU polymer to be converted into a microwave absorbing composite coating (CWPU1 and CWPU2). Structural, mechanical and morphological properties were investigated. The microwave absorption measurements were performed by using transmission/reflection method via waveguide method in the frequency range of 8.2–12.4 GHz. Permittivity and permeability measurements were performed in the frequency range of 8.2–12.4 GHz. It has been found that CWPU1 which was prepared by using WPU1 polymer indicated broader microwave absorption between 9.4 and 11.7 GHz due to its dendritic structure. Besides, permittivity and permeability results indicated that CWPU1 and CWPU2 have distinctive magnetic properties.     

Synthesis and in vitro Study of Artemisinin/Synthetic Peroxide-Based Hybrid Compounds against SARS-CoV-2 and Cancer

The newly emerged severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) cause life-threatening diseases in millions of people worldwide, in particular, in patients with cancer, and there is an urgent need for antiviral agents against this infection. While in vitro activities of artemisinins against SARS-CoV-2 and cancer have recently been demonstrated, no study of artemisinin and/or synthetic peroxide-based hybrid compounds active against both cancer and SARS-CoV-2 has been reported yet. However, the hybrid drug's properties (e. g., activity and/or selectivity) can be improved compared to its parent compounds and effective new agents can be obtained by modification/hybridization of existing drugs or bioactive natural products. In this study, a series of new artesunic acid and synthetic peroxide based new hybrids were synthesized and analyzed in vitro for the first time for their inhibitory activity against SARS-CoV-2 and leukemia cell lines. Several artesunic acid-derived hybrids exerted a similar or stronger potency against K562 leukemia cells (81–83 % inhibition values) than the reference drug doxorubicin (78 % inhibition value) and they were also more efficient than their parent compounds artesunic acid (49.2 % inhibition value) and quinoline derivative (5.5 % inhibition value). Interestingly, the same artesunic acid-quinoline hybrids also show inhibitory activity against SARS-CoV-2 in vitro (EC₅₀ 13–19 μm ) and no cytotoxic effects on Vero E6 cells (CC₅₀ up to 110 μM). These results provide a valuable basis for design of further artemisinin-derived hybrids to treat both cancer and SARS-CoV-2 infections.     

Deferring elimination of design alternatives in object‐oriented methods

While developing systems, software engineers generally have to deal with a large number of design alternatives. Current object‐oriented methods aim to eliminate design alternatives whenever they are generated. Alternatives, however, should be eliminated only when sufficient information to take such a decision is available. Otherwise, alternatives have to be preserved to allow further refinements along the development process. Too early elimination of alternatives results in loss of information and excessive restriction of the design space. This paper aims to enhance the current object‐oriented methods by modeling and controlling the design alternatives through the application of fuzzy‐logic‐based techniques. By using an example method, it is shown that the proposed approach increases the adaptability and reusability of design models. The method has been implemented and tested in our experimental CASE environment. Copyright © 2001 John Wiley & Sons, Ltd.