A novel antioxidant source: evaluation of in vitro bioaccessibility,antioxidant activity and polyphenol profile of phenolic extract from black radish peel wastes (Raphanus sativus L. var. niger) during simulated gastrointestinal digestion

The aim of this study was to evaluate the potency of polyphenolic extract from black radish (Raphanus sativus L. var. niger) root peel waste (PEBRRP) as an antioxidant food additive. PEBRRP was found a powerful antioxidant extract, in which had 172.9 ± 11.5, 462.72 ± 3.05, and 796.51 ± 10.4 mg TE per g dw of total antioxidant capacity (TAC) by CUPRAC, DPPH, and FRAP assays, respectively. The total phenolic content (TPC) and total flavonoid content (TFC) of PEBRRP were found as 305.51 ± 5.2 mg GAE per g dw and 171.58 ± 6.2 mg CAE per g dw, respectively. The ferulic acid (28.02 ± 4.5 mg per g dw) and epicatechin (19.82 ± 3.6 mg per g dw) were identified as the main polyphenols in undigested PEBRRP. The bioaccessibility of total phenolic and total flavonoid compounds of PEBRRP was found approximately 5%, and the antioxidant capacity of bioaccessible PEBRPP fraction was determined 6% in CUPRAC, 36% in DPPH and 47% in FRAP methods.     

LC–MS/MS characterization,antidiabetic, antioxidative,and antibacterial effects of different solvent extracts of Anamur banana (Musa Cavendishii)

Food Science and Biotechnology - The main objective of this study was to examine the phenolic compounds and the antibacterial, antioxidant, anti-α-glucosidase and anti-α-amylase...     

Frequency of Escherichia coli O157:H7 in Turkish cattle

In this study, five abattoirs in Istanbul were visited between January 2000 and April 2001. During these visits, 330 cattle were selected by a systematic sampling method. Cattle were examined clinically and breed, age, and sex were recorded. Rectal swabs were taken immediately after slaughter. Immunomagnetic separation was performed, and sorbitol-negative colonies were selected on sorbitol MacConkey agar with cefixime and tellurite (CT-SMAC agar). These colonies were checked for 4-methylenebelliferyl-beta-D-glucuronide, indol, rhamnose, and urease activity and motility. Serotypes of bacteria were determined by using antisera specific for Escherichia coli O157 and H7. All cattle selected were clinically healthy. Of 88 sorbitol-negative colonies selected on CT-SMAC agar, isolates from only 14 (4.2%) cattle reacted with anti-O157, and 13 of these isolates also reacted with anti-H7. E. coli O157:H7 was isolated from all breeds, but the numbers of isolates were largest for Holstein and Swiss Brown cows. E. coli O157:H7 was most frequently isolated from 2-year-old cattle. Similarly, it was most frequently isolated from male cattle. E. coli O157:H7 was isolated from cattle slaughtered in four of the five abattoirs studied.     

Evaluating the fabric performance and antibacterial properties of 3-D piezoelectric spacer fabric

The increasing need of on-demand power for enabling portable low-power devices and sensors has necessitated work in novel energy harvesting materials and devices. In a recent work, we demonstrated the production and suitability of three-dimensional (3-D) spacer all fibre piezoelectric textiles for converting mechanical energy into electrical energy for wearable and technical applications. The current work investigates the textile performance properties of these 3-D piezoelectric fabrics including porosity, air permeability, water vapour transmission and bursting strength. Furthermore, as these textiles are intended for wearable applications, we have assessed their wear abrasion and consequently provide surface resistance measurements which can affect the lifetime and efficiency of charge collection in the piezoelectric textile structures. The results show that the novel smart fabric with a measured porosity of 68% had good air (1855 l/m²/s) and water vapour permeability (1.34 g/m²/day) values, good wear abrasion resistance over 60,000 rotations applied by a load of 12 kPa and bursting strength higher than 2400 kPa. Moreover, the antibacterial activity of 3-D piezoelectric fabrics revealed that owing to the use of Ag/PA66 yarns, the textiles exhibit excellent antibacterial activity against not only Gram-negative bacteria E. coli but they are also capable of killing antibiotic methicillin-resistant bacteria S. aureus.     

Surface modification of polyester and polyamide fabrics by low frequency plasma polymerization of acrylic acid

In this study, the surface characteristics of polyester and polyamide fabrics were changed by plasma polymerization technique utilizing acrylic acid as precursor. This monomer was used to produce hydrophilic materials with extended absorbency. The hydrophilicity, total wrinkle recovery angle (WRA°) and breaking strength of the fabrics were determined prior and after plasma polymerization treatment. The modification of surfaces was carried out at low pressure (<100 Pa) and low temperature (<50°C) plasma conditions. The effects of exposure time and discharge power parameters were optimized by comparing properties of the fabrics before and after plasma polymerization treatments. It was shown that two sides of polyester fabric samples were treated equally and homogeneously in plasma reactor. For polyester fabrics, the minimum wetting time, 0.5 s, was observed at two plasma processing parameters of 10 W–45 min and 10 W–20 min, where untreated fabric has a wetting time of 6 s. For polyester fabrics, the maximum value was obtained at 60 W–5 min with the wrinkle recovery angle of 306° where the untreated fabric has 290°. The optimum plasma conditions for polyamide fabrics were determined as 30 W–45 min where 2 s wetting time was observed. Wrinkle recovery angle of untreated polyamide fabric was 264°. In this study, after plasma polymerization of acrylic acid, wrinkle recovery angle values were increased by 13%. No significant change was observed in breaking strength of both fabrics after plasma treatment. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 2318–2322, 2007     

Utilisation of waste clay from boron production as a landfill liner material

The objective of this study was to investigate the potential utilisation of waste clay from boron production in sanitary landfills. The waste clay (CW) was mixed with bentonite (B) and waste tyre (TW) at different ratios. Results show that, any of the CW-TW mixtures were not acceptable to use in landfills because of insufficient bearing capacity values. On the other hand, CW and 2B/98CW mixtures have sufficient values from the point of experimental tests. As a conclusion, it has been concluded that CW can be used as a liner material for landfills without an addition.     

Development of flame retardancy properties of new halogen‐free phosphorous doped SiO2 thin films on fabrics

In this study, flame retardancy properties of fabrics treated with phosphorous (P) doped and undoped SiO₂ thin films were developed by sol–gel technique. As to this aim, P‐doped and undoped SiO₂ film were coated on cotton fabric from the solutions prepared from P, Si‐based precursors, solvent, and chelating agent at low temperature in air using sol–gel technique. To determine solution characteristics, which affect thin film structure, turbidity, pH values, and rheological properties of the prepared solutions were measured using a turbidimeter, a pH meter, and a rheometer machines before coating process. The thermal, structural, and microstructural characterization of the coating were done using differential thermal analysis/thermograviometry, fourier transform infrared spectroscopy, X‐ray diffractometry, and scanning electron microscopy. In addition, tensile strength, wash fastness, flame retandancy, and lightness properties of the coated fabrics were determined. To compensate the slight loss of tensile strength of samples, which occurred at the treated fabrics with P‐doped Si‐based solutions, the cotton fabrics were coated with polyurethane films during second step. In conclusion, the flame retardant cotton fabric with durability of washing as halogen‐free without requiring after treatment with formaldehyde was fabricated using sol–gel processing for the first time. Moreover the cotton fabrics, which were treated with P‐doped Si‐based solutions and then coated with polyurethane at second step, still has got nonflammable property. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007