Wideband HBT circuits for operation above 10 GHz and power supply voltages below 5 V

Single-stage and two-stage differential cascode amplifiers, and a 2:1 multiplexer, fabricated in InP/InGaAs HBT technology and powered from less than 5 V supplies, are presented. The amplifiers have typical DC gains of 21 and 33 dB, respectively, and unity-gain bandwidths in excess of 15 GHz, with approximately 20 dB gain at 10 GHz. The multiplexer was tested at rates up to 20 Gbit/s.<>     

Buckling analysis of multi-walled carbon nanotubes under combined loading considering the effect of small length scale

The torsional and axially compressed buckling of an individual embedded multi-walled carbon nanotube (MWNTs) subjected to an internal and/or external radial pressure was investigated in this study. The emphasis is placed on new physical phenomena which are due to both the small length scale and the surrounding elastic medium. Multiwall carbon nanotubes which are considered in this study are classified into three categories based on the radius to thickness ratio, namely, thin, thick, and almost solid. Explicit formulas are derived for the van der Waals (vdW) interaction between any two layers of an MWNT based on the continuum cylindrical shell model. In most of the previous studies, the vdW interaction between two adjacent layers was considered only and the vdW interaction among other layers was neglected. Moreover, in these works, the vdW interaction coefficient was treated as a constant that was independent of the radii of the tubes. However, in the present model the vdW interaction coefficients are considered to be dependent on the change of interlayer spacing and the radii of the tubes. The effect of the small length scale is also considered in the present formulation. The results show that there is a unique buckling mode (m,n) corresponding to the critical shear stress. This result is obviously different from what is expected for the pure axially compressed buckling of an individual multi-walled carbon nanotube.     

Prejudice and Stereotype Maintenance Processes: Attention, Attribution, and Individuation.

Three experiments examined the relationship between prejudice and processing of stereotypic information. Higher levels of prejudice were associated with greater attention to and more thorough encoding of stereotype-inconsistent than stereotype-consistent behaviors but only when processing capacity was plentiful (Experiments 1 and 3). High-prejudice participants attributed consistent behaviors to internal factors and inconsistent behaviors to external forces (Experiment 2). Together, these results suggest that high-prejudice people attend carefully to inconsistent behaviors to explain them away but only if they have sufficient resources to do so. Results also showed that low-prejudice but not high-prejudice participants formed individuated impressions by integrating the implications of the target's behaviors (i.e., individuating). High levels of prejudice appear to be associated with biased encoding and judgment processes that may serve to maintain stereotypes. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Mathematical model evaluating for degradation of azo dye in contaminated water by UV/persulfate process

In the present study, the photooxidative degradation of Acid Red 14 (AR 14) was investigated in the UV/persulfate process, and the results of the degradation rate of AR 14 were parametrically represented by ordinary differential equations to find mathematical model for the degradation rate of AR 14 in this process. Our experimental observations led to a model for AR 14 degradation in the UV/persulfate system that could be used to predict removal efficiency by changes of S₂O₈²⁻ (X₁) and dye concentration (X₂), pH (X₃), temperature (X₄) and also distance of UV lamp from solution (X₅). It was found that persulfate and dye concentrations were the most important parameters for AR 14 degradation rate. Moreover, the results showed that the degradation rate was in good agreement with the first-order kinetics for all the parameter values studied. Moreover, the results of the mathematical model agree well with the experimental values (R² = 0.96). Our findings in this study showed that degradation efficiency of UV/S₂O₈²⁻ process for AR 14 was obtained as 98%. Therefore, this model could be applicable before scaling up the AR 14 degradation using UV/persulfate process.     

In Vitro Antiamoebic Activity Evaluation and Docking Studies of Metronidazole–Triazole Hybrids

An in‐house database of 520 compounds was docked against Entamoeba histolytica thioredoxin reductase (EhTrR), a promising target for the treatment of amoebiasis. Amongst these, some metronidazole (MTZ)–triazole hybrids were ranked high, with docking scores from ?10.23 to ?7.56. Studies of the binding orientations and conformations show that the head groups of MTZ–triazole hybrids interact with the arginine residues within the binding pocket of EhTrR, making it clear that such is the optimal and most reliable orientation for this class of compounds. The top‐ten MTZ–triazole hybrids were then selected for evaluation of their activity against the HM1:IMSS strain of amoeba. The most active compound, 2‐pyridyl‐(1,2,3‐triazolyl)metronidazole 10 , with an IC₅₀ value of 8.4 nM , was significantly more active than the standard drug MTZ alone. Docking studies revealed that compound 10 may act as an EhTrR inhibitor with activity in the nanomolar range and satisfactory ADME properties; it is a suitable candidate to be carried forward as a potential lead in the discovery of drugs to combat amoebiasis.     

Geohydrological properties of selected badland sediments in Saskatchewan,Canada

Geological and seasonal weather variations govern the geohydrological properties of the Avonlea badlands in Saskatchewan, Canada. Three surface sediments exhibiting distinct lithologic variations were found: a steeply sloped and fissured sandstone; a mildly sloped and popcorn-textured mudrock; and a flat and eroded pediment. The fines content increased from the dry to the wet state, with contents of 17–33 % seen for sandstone, 4–98 % for mudrock, and 21–42 % for pediment. The water adsorption capacity was found to be highest for mudrock (w _l = 96 % and w _p = 47 %), followed by sandstone (w _l = 39 % and w _p = 31 %), and then by pediment (w _l = 31 % and w _p = 23 %). The soil water characteristic curves of sandstone and mudrock showed bimodal distributions with a low air entry value (6 and 9 kPa) pertaining to drainage through cracks and a high air entry value (160 and 92 kPa) associated with flow through the soil matrix. The pediment presented a unimodal soil water characteristic curve with a single matrix air entry value of 4 kPa. The saturated hydraulic conductivities for sandstone, mudrock, and pediment were measured as 8.5 × 10^?6, 4.0 × 10^?8, and 1.8 × 10^?5 m/s, respectively.     

Pedestrian injury analysis with consideration of the selectivity bias in linked police-hospital data

Evaluation of crash-related injuries by medical specialists in hospitals is believed to be more exact than rather a cursory evaluation made at the crash scene. Safety analysts sometimes reach for hospital data and use them in combination with the police crash data. One issue that needs to be addressed is the, so-called, selectivity (or selection) bias possible when data used in analysis are not coming from random sampling. If not properly addressed, this issue can lead to a considerable bias in both the model coefficient estimates and the model predictions. This paper investigates pedestrian injury severity factors using linked police-hospital data.A bivariate ordered probit model with sample selection is used to check for the presence of the selectivity bias and to account for it in the MAIS estimates on the Maximum Abbreviated Injury Scale (MAIS). The presence of the sample selection issue has been confirmed. The selectivity bias is considerable in predictions of low injury levels.The pedestrian injury analysis identified and estimated several severity factors, including pedestrian, road, and vehicle characteristics. Male and older pedestrians were found to be particularly exposed to severe injuries. Rural roads and high-speed urban roads appear to be more dangerous for pedestrians, particularly when crossing such roads. Crossing a road between intersections was found to be particularly dangerous behavior. The size and weight of the vehicle involved in a pedestrian crash were also found to have an effect on the pedestrian injury level. The relevant safety countermeasures that may improve pedestrian safety have been proposed.     

Seismic performance assessment of steel moment frames with generic Locally Reinforced connections

Seismic performance of Steel Moment-Resisting Frames (SMRFs) with generic Locally-Reinforced (LR) connections has been investigated incorporating both earthquake-induced and modeling uncertainties. The LR connections were numerically modeled following the suggestions made by previous researches and were used to numerically model three buildings with various heights which were designed regarding the specifications of current standards. For reflecting the record-to-record (RTR) variability, the Incremental Dynamic Analysis (IDA) procedure was utilized within the Performance-Based Earthquake Engineering (PBEE) methodology. In this regard, the structures’ performance in a multitude of structural response levels was probabilistically assessed in “considering” and “neglecting” conditions of modeling uncertainties. For performing the modeling uncertainty analysis, a number of modeling parameters that best reflected the structures’ variability due to lack of knowledge were selected as random variables. Perturbing the modeling variables from their median values, a set of sensitivity IDAs were performed and a polynomial response surface was established. Incorporation of the response surface in conjunction with Monte Carlo simulation led, finally, to a fully probabilistic performance evaluation of the studied structures in varied structural response levels. The effect of modeling uncertainties in altering the predicted performances was found to be insignificant in the range of buildings and structural elements studied in this article.     

Laser-Tuned Surface Wettability Modification and Incorporation of Aluminum Nitride (AlN) Ceramics in Thermal Management Devices

Aluminum nitride (AlN), a versatile ceramic with high thermal conductivity, high electrical resistivity, and a coefficient of thermal expansion compatible with silicon, is well-suited for direct-to-chip cooling applications of electronics, implementation in wide bandgap semiconductors, and for high-temperature heat exchangers. Despite multiple advantages, AlN's implementation in liquid-cooling applications is often hindered by surface-degrading effects of working-fluid-induced hydrolysis. Herein, a scalable -but highly tunable- wettability engineering approach is introduced, that allows effective implementation of bulk AlN substrates in enhanced two-phase cooling of electronics. The approach prevents hydrolysis of AlN by aqueous media and establishes control over surface roughness, all the while maintaining bulk integrity and material properties of the underlying substrate. Demonstration of the new approach is presented in spontaneous, pumpless, surface liquid transport, a necessity if such ceramics are to play an integral role as components of sealed, phase-change, wickless thermal-management devices (e.g., vapor chambers or heat pipes) that require rapid working-fluid transport in their multi-phase interior. The novelty of this work lies in establishing a scalable methodology for utilizing and further enhancing the properties of this non-oxide ceramic material for phase-change heat-transfer hermetic devices, thereby paving the way toward the implementation of this intriguing material in next-generation heat spreaders.